Ka-t Help

[mikey0129]

hey guy im new to turboing a 240sx

i have a 1993 s13 dohc and wanting to turbo it out

i wanted to go with the cheap turbo route since im not a baller

so help me out guys

i was thinking... all this items r from fat boy garage in ebay

Bottom mount t25 turbo

turbo manifold

turbo elbow pipe

those 3 items with gasket and screws are $400

and ebay frontmount intercooler with pipings are $200

like oil lines returnlines etc $100

I heard of people just putting this on a stock injectors and stock maf and stock ecu
Whould this setup work with stock maf,ecu,injectors and no tuning ?
Can i just slap dis on and make it run ?
im prob not ganna mess with any boost lvl ill prob have like 7-8 starting right?
and if i wanted more power den i could change out all the injectors,ecu,maf right?

This is my daily driving car so im not ganna be pushing krxy hp
THX for all the help guys

[rps13drift]

I would probly shell out a few extra $ fpr stock sr20 injectors and a safc. My buddy as your exact set up but with the parts i mentioned and the thing drives pretty good!

[satal95]

they have a turbo ur ka for dummies if u search for it. It will answer a lot of questions

[spg240sx]

atleast get a bigger fuel pump (Walbro 255lph), 370cc SR20 stock injectors, and a SAFC if you don't want to blow your engine up

[trsilvias13]

search ka-t.org

Lots of good information, especially t25 bottom mount ka

[mikey0129]

i already asked ka-t.org for help and they no helping me.. posting dumb stuff

[thejapino]

I suggest searching the forum then. All the info is out there and what you're doing isn't exactly groundbreaking, just look for it. And wtf is up with posting the same thread 3 times on zilvia? You probably didn't get a good response on KA-t b/c you pulled the same shit over there. GL with your build