BEE*R Rev limiter/KA24DE

[DARKEST_HOUR]

*searched

Anyone successfully install the Bee* R rev limiter into there obdII KA ??

Can't get mine to work :aw:


I went by ritz_s14 instructions of

"For those of you who ever plan to install a BEE*R Rev limiter on your s14
Red is ignition
Black is ground
White(optional)-ebrake switch

4Cyl = Cut Grey Wire
Rotary Engines: Cut Brown Wire
6Cyl = leave all wires intact.

Yellow-pin 44/40 is your reference signal(1degree)
Green-41/45 is your 180degree signal."

it didn't work
help !

[illvialuver]

no i havent but i want one for mine, so ill check back to see when you get this finished

[DARKEST_HOUR]

So anyone if the rev limiter worked for ritz_s14.I sent him a few messages . . . no reply

[Paint209]

back from the dead. anyone?

[cparcell]

It's easy use pin 38 ac/power blk/red stripe with red wire beer, pin 39 blk with blk beer which is ground, pin 40 with yellow wire and pin 41 with green wire. This works for a 95 ka24de manual Trans. Male sure beer is on 1-10 gain and rev limit on 4k to test