Ideas about blocking off hole from stock recirc

[jskateborders]

Does anyone have any interestin Ideas on how to block off The outlet on the stock sidemount for the recirc? I was thinking about just a plumbing cap, but Im really interested to see what everyone else has done.

[nrg]

Autozone has a "do-it-yourself help" section where they sell plugs and cap offs.

[jskateborders]

Autozone has a "do-it-yourself help" section where they sell plugs and cap offs.
The only thing I was there were vaccum capoffs and ect, unless I didnt look in the right place.

[speed_racerx]

i stuck a freeze plug and clamped it. i also wrapped the crap out of it wit electrical tape and duct tape. been holding strong for 3 years now.

also

there's this option..

http://img.photobucket.com/albums/v287/speedracerzero/smic1.jpg

he got it from home depot.. not sure where though

[nissanguy13]

i stuck a freeze plug and clamped it. i also wrapped the crap out of it wit electrical tape and duct tape. been holding strong for 3 years now.

also

there's this option..

http://img.photobucket.com/albums/v287/speedracerzero/smic1.jpg

he got it from home depot.. not sure where though

Thats awesome, and I thought I was the only one. I had some ghetto FMIC piping that had a spot for I don't know what. So I went to Home depot bought a package of those and did the exact same thing. They are used for chairs/stools, you put them on the legs so they don't slide.

[nrg]

i stuck a freeze plug and clamped it. i also wrapped the crap out of it wit electrical tape and duct tape. been holding strong for 3 years now.

also

there's this option..

http://img.photobucket.com/albums/v287/speedracerzero/smic1.jpg

he got it from home depot.. not sure where though

WOW that's how my old SMIC was. that plug i got from home depot is a rubber FEET for kitchen stools haha. that shit was a bitch to get on there but it held up great. Before that, i used a 2liter bottle cap clamped inside a hose.

[azndoc]

LOLz that's what I did.

I wen to HD and got the chair stopper things, slipped it on, and clamped it tight.

I took off the stock BOV. Used one 1 1/4" and one 1 1/8".

Works.

Its a few bucks for the package of two or four.

[k's_silvia2.0]

I just used a cap off a mountin dew 2 litter;)
way budget!!!Plus you get a drink.

[EnthusiastMan]

On my front mount kit I used an expanding Rubber Freeze plug to plug it. You just put the plug in the tubing and twist the nut on the top till it's nice and snug. You can find them at any parts store.