sr20 greddy pulleys install help!!!

[kenji_s14]

ok..i just got the greddy w/p, p/s, alt pulleys for my s14 sr20...i want to install them..but how the hell do i take off my stock ones???as i try to loosen the bolt on the pulley..the whole thing turns?am i like tottally doing it wrong?never really removed it b4...any one done it b4 plz give me some tips...would really appreciate it..i really want to get it done b4 nopi this weekend..

[rican_nick]

14mm deep well.. put it "thru" the pulley onto bolt behind the pulley

you'll need to spin the pulley until the hole lines up with the bolts that mount the pump to the bracket.. put the deep well on there and turn the pulley till u have tension.. then you can take the bolt off and jiggly the pulley off.

OR

you can use an Impact and just bump it and it'll loosen it up.

I've done it with method 1 at least 20 times..

edit: .. i thought u were referring to only the powerstearing pump.

[MavericStephenc]

are you serious?

[burnsauto]

its not that bad...

water pump - take a long flathead scewdriver and your 10mm wrench. place the screwdrivers shaft ontop of one stud...and slide it underneath the stud to the left of it. this will serve as your leverage. as you have the screwdriver in place, losen the nut with the 10mm wrench.

power steering - need a 6" extension, and a breaker bar (or pipe..something...you'll need some torque to break it free) slide the extension in one of the two holes in the stock p/s pulley, and have the extension rest ontop of the p/s braket...Theres your leverage. then its just a matter of breaking it free.

alternator - you're going to need an air gun to take that sucker off (easiest way at least..)


hope this helps you out a little bit. :)

[kenji_s14]

thanx guys...