Log in

View Full Version : S14 Dash board replacement.


aTx_S14
09-06-2007, 03:04 PM
I am replacing my dash board myself, and can't figure out where all the bolts are. i did a search but found nothing on taking them apart. Any links to tech site or tips?

Thanks

MavericStephenc
09-06-2007, 03:23 PM
there should be like 6bolts all together remove the center console and bezels that hold the radio and such in, remove the heater vent under the windo in middle of the dash, remove (2? bolts there), then under the dash on each side ther should be a bolt or two.and finally the middle of the dash where you removed the redio there should be 2.

drop the steering column for ease of removal then put new one in

95Blue240sx
09-06-2007, 03:32 PM
Check the FSM also. Im sure its listed there where the screws are located.

aTx_S14
09-06-2007, 03:33 PM
there should be like 6bolts all together remove the center console and bezels that hold the radio and such in, remove the heater vent under the windo in middle of the dash, remove (2? bolts there), then under the dash on each side ther should be a bolt or two.and finally the middle of the dash where you removed the redio there should be 2.

drop the steering column for ease of removal then put new one in

Thanks.
Do i have to remove my air bag first? How do I Remove the VIN? looks like its permanately attaced to the dash.

BTW
How come I can't Browse the install section on this forum?

MavericStephenc
09-06-2007, 03:36 PM
i cant browse that either I think you need to be a premium member.

as for the air bag no you dont, there are 2 bolts (12mm i think) holding the steering column up remove them and you should be golden. pm me if you got other ?'s

aTx_S14
09-06-2007, 03:36 PM
Check the FSM also. Im sure its listed there where the screws are located.


Whats FSM? thanks man :D

JDMS1lv1a
09-06-2007, 03:39 PM
^^ Factory Service Manual...there is actually 3 bolts under the defrost vents by the windshield.

The defrost vents are fragile so I'd take a flathead and carefully remove the vents

MavericStephenc
09-06-2007, 03:40 PM
yea that too, i broke mine

aTx_S14
09-06-2007, 03:42 PM
i cant browse that either I think you need to be a premium member.

as for the air bag no you dont, there are 2 bolts (12mm i think) holding the steering column up remove them and you should be golden. pm me if you got other ?'s

Thanks man, I will be sure to Pm.

aTx_S14
09-06-2007, 03:43 PM
^^ Factory Service Manual...there is actually 3 bolts under the defrost vents by the windshield.

The defrost vents are fragile so I'd take a flathead and carefully remove the vents


Great, Thanks for the advice.

95Blue240sx
09-06-2007, 04:13 PM
is that your tank in your sig? If it is, its pretty fucking awsome

Sir
09-06-2007, 05:35 PM
the side panels under the dash (ecu cover and fuse cover) will hide the 2 10mm bolts as well, and I could be wrong but I recall one being in the vent on a pass side?
30min of work and beer.
done.

aTx_S14
09-06-2007, 08:21 PM
is that your tank in your sig? If it is, its pretty fucking awsome



Thanks. Yeah its my tank. My other favorite hobby.

aTx_S14
09-06-2007, 08:23 PM
the side panels under the dash (ecu cover and fuse cover) will hide the 2 10mm bolts as well, and I could be wrong but I recall one being in the vent on a pass side?
30min of work and beer.
done.

thanks, I'll look out for those hidden bolt.

MavericStephenc
09-06-2007, 08:29 PM
so how is it coming? get it out yet?

aTx_S14
09-08-2007, 11:51 AM
so how is it coming? get it out yet?


yeah I got it out. Wasnt' so bad. I will put the new dash in next week. Thanks for all the help.

I will need to replace my left driversside window moter. So I will ask some questions later. After I do the search.

mrmephistopheles
09-08-2007, 12:02 PM
OP: shrink your signature down to forum limits.