Can I have your nuts?

[lonelydrifter]

Hey guys I already tried WTB section and got no luck. Anyone have any spare OEM s13 SR intake manifold bolts? I need the set that bolts runners to head. I also need some exhaust manifold nuts, as im not sure if home depot ones will satisfy with the heat. Help me out guys, i'll buy them.

[GTRS14]

I Know A Shop Out Here In Cali....they Have The Exhaust Manifolds.....

[GTRS14]

My Bad Intake....lol

[bigOdom1]

if you have one then take it to napa/homedepot and get grade eight in the same size

[Kuzumi]

if you have one then take it to napa/homedepot and get grade eight in the same size

this man speaks the truth. I went to Orrieyls(lolsp) and matched one with the bolt key that they have. ended up being $3 for about 8 of them. good luck

[ThatGuy]

if you have one then take it to napa/homedepot and get grade eight in the same size

But then it is no longer JDM Tyte!

:rofl: Seriously though, just do it. It's not a special nut that only comes with the engine. You just have to make sure it's strong enough i.e. Grade 8.

[lonelydrifter]

I don't have any of the intake manifold bolts to match with. If anyone has one please send me a pen pal letter with a bolt!

[clutch kick drifter]

well look at it.... and then look at some random nuts at autozone and get a few. Maby thats just me but i can usually match nuts and shit up pretty good.... plus its only like 2 bucks you might waste but in the long run youll use them somewhere.:)

[lonelydrifter]

I won't have a hard time matching nuts. The main thing I really need is the intake manifold Bolts.

[!Zar!]

I mean really, how hard is it to find some metric grade eight hardware?

[Mirage]

good luck finding grade 8 metric hardware. Common metric ratings are 8.8 and 12.9, the latter being the most used on engine hardware. You can get brand new SR hardware from the nissan dealer most of the time, if it matches a US part number (studs, nuts, yokes) if you know the part numbers, and have it within 2 days even if they have to order it. HD/Lowes metric hardware selection sucks, go to an ACE, or an industrial fastener supply place. Exhaust should be M10x1.25, i'd imagine the intake is M8x1.25

S13 SR (redtop) part numbers.

Intake:
08120-8301F - bolt x6
08223-82810 - stud x2
08911-60800 - nut x2
00915-41500 - washer x2

Exhaust:
08912-8401A - nut
14037-42L02 - yoke
08267-03010 - stud

[DJ_Sunrise]

WWW.MCMASTER.COM get all your shit through there.

-Bart

[lonelydrifter]

Thanks for the help guys.