For Sale: S14 KA parts and turbo stuff

[drift into a curb]

SSautochrome Manifold for KA-T bottom mount T25 with fresh header wrap $90

Enthalpy ECU tuned for KA24DE s13. Will come with rom tune for stock compression ratio, GT2871R .64 A/R at 12psi, FMIC. Paid $535. $400 shipped.

Illegal Garage Dual Diaphram Clutch set up + Fidanza 11lb. Flywheel. Super Sweet set up $500
http://img520.imageshack.us/img520/20/dscn3198cy9.jpg (http://imageshack.us)
http://img520.imageshack.us/img520/20/dscn3198cy9.00068da0fc.jpg (http://g.imageshack.us/g.php?h=520&i=dscn3198cy9.jpg)

Koyo Radiator S14 KA24DE used for 10k miles $200
http://img338.imageshack.us/img338/9364/img0057tf8.jpg (http://imageshack.us)

More to come. Parts will most likely be located in Santa Barbara. If you have any questions, let me know. [email protected]

[The Chad]

Pics of the turbo manifold please. Also price shipped to 23221. <--VA
I am very interested!! :)

[twastheglow]

Also very interested in the manifold! Will the T28 off of an S15 SR bolt to that as well?
*mike*

[importdude]

Fidanza 11lb. Flywheel how mucch

[devonkyle77]

any chance of selling the hks actuator seperate?

[drift into a curb]

The Chad, the manifold is used and was wrapped in white header wrap, but that came undone. I now have white or black header wrap to install. Here it is after I wrapped it.
http://img170.imageshack.us/img170/8919/dscn5276sh8.jpg

twastheglow, the manifold will fit T25/28 flanged turbos, so yes it will fit s15 turbo.

importdude, I'm looking to sell as a package for right now. I'll keep you updated as that changes.

devonkyle, looking to sell as a package to save the buyer some scratch. If I decide to part, I'll let you know.

[The Chad]

Hey man, looks great! I just need to know how much you want to ship it though. I'm located in VA, 23221. Thanks again!

[drift into a curb]

Hey The Chad, I just have to get my car back ready to disassemble it and I'll give you a heads up on shipping. Thanks

[93s13]

how much mileage did those parts have before you developed a knock in your engine? where in socal do you live? do you have an engine hoist/cherry picker?

[The Chad]

Sounds good man. Thanks for the quick response!! :)

[drift into a curb]

93s13, It had almost 2k miles on it. The car stalled on me and it started knocking shortly after. I don't have the time to take it apart, nor will I spend the time to do it.

[The Chad]

Hey man. I was just curious as to if you still had the manifold? Let me know. :) Pm me if that's easier. Thanks!!

[drift into a curb]

Hey the Chad, car will be moving to a garage next week at earliest. So you will have to wait until then if you can. If you're in a hurry, sorry. I'll keep you updated.

[The Chad]

Hey man sounds good. I'm in no hurry, just piecing together a turbo kit. Thanks for the update!

[drift into a curb]

New Price on the Ultimate!

[IIIXziuR]

Any snaps of the Koyo Rad? That seems like an awesome price.
Would you be able ship, just curious (08831, NJ)

[drift into a curb]

I'll have to consider shipping on the radiator. I don't have a box. but I updated the only pic i could take with it still connected.

[ramblux]

Haven't heard back from you on that diff. :) When can I get it from you? :):)

[drift into a curb]

Hey the chad. I have motor back. Still want the manifold?

[drift into a curb]

Hey the chad. I have motor back. Still want the manifold?

[posdriftin]

still have the radiator? and where in so cal?

[twastheglow]

Let me know if he doesn't take the manifold. I'm still interested.
*mike*

[drift into a curb]

Sent you a PM posdriftin. Located in Anaheim, CA now.

twastheglow will do.

[drift into a curb]

More pictures of emanage added.

[mrizsuki]

if you carry a 95-98 ka24de engine with less than 100k on it, please send a reply to [email protected] and list the price, i am looking between 200-350 or around there just for the block, dont need the tranny.

[drift into a curb]

Sorry no motor for sale right now. Stuff still for sale.

[86301s13]

manifold 90 shipped??

[twastheglow]

^ There's a line for that manifold. :-/ But I'm pretty sure it's probably gone.
*mike*

[drift into a curb]

Hey twasteglow, haven't received word from The Chad yet. I'll keep you updated, but it looks like you may be next in line.

[AznDrftr.]

intersted in the radiator seriously. Will it work with s13 sr?

Let me know. And shipped.

[drift into a curb]

S13 SR radiator upper radiator hose is located on the opposite side. Also on the fill neck there is the tube that goes to the reservoir which is on the opposite side as well (to my knowledge since s13s are diff from s14).

I've seen people running a modified hose and extended 2' pipe from KA radiator to sr waterneck and I don't like it. I'd recommend just buying a SR radiator. If you're still interested, I can take a look at shipping it to you. Thanks

[The Chad]

PMed you about the manifold. Still interested, just almost forgot about you :) . I also have some N/A KA crap if you need anything. Alternator, starter, and a whole damned motor that was running b4 removal and some other rouge stuff. I'll have to drop everything off at a junk yard if no one wants any of it. It's on craigslist under VA, Richmond, "KA24DE" listing.

[drift into a curb]

Sorry Chad. I've been lagging. I have the manifold off. I just need to re-wrap it and post the pictures. I'll let you know. Anybody else interested?

The clutch is freaking sweet too. Flywheel was recently resurfaced before break-in.