whats this part called

[jskateborders]

Im really sorry for the dumb question guys but i cant think of what the rubber peice between the intake manifold and the injector is called. Like the proper name so that i can get some from courtesy nissan.
Thanks

[MELLO*SOS]

I think you're referring to the O-Rings that sit between the fuel injector and the intake manifold? They are just called...... "O-Rings" LOL. But remember, there are two sizes of O-Rings used on the KA... There are small O-Rings that go on the top and bottom of the injector itself (~10mm in diameter) to seal the fuel into the fuel rail, then there is a very fat O-Ring that works as a spacer/insulator between the injector and the intake manifold. If these are the parts you're looking for, they are available from the auto parts store.

[jskateborders]

yea thats what im looking for
would that work from a 300zxtt since it uses the same injectors?

[MELLO*SOS]

I can't really remember, but I think the kit I got was for an altima? If the Z33 uses side feed injectors, then there is a really good chance they use the same exact o-rings... Bring in your old o-rings to autozone or the dealer, and try asking for a 240sx fuel injector o-ring kit...

[MELLO*SOS]

They might call them fuel injector seal kit, or fuel injector insulator, or fuel injector bottom o-ring... etc seems everywhere calls them something different.

This is the fat rubber o-ring:

http://img.eautopartscatalog.com/live/C101045505.JPG

BTW anyone else looking for these stupid O-Rings should read my thread on this exact same topic: http://www.zilvia.net/f/showthread.php?t=143528&highlight=injector+insulator

And do a search here for "injector insulator"

[jskateborders]

thanks alot man

[MELLO*SOS]

You're welcome, good luck with the install..... Btw neither of my local dealers had these rings, I found them at Checkers/Autozone

[jskateborders]

This is the part i was talking about
its for an sr
pn is 16635-00004