Houston FS: JDM Nissan 240SX / 180SX / Silvia Project and Parts

[the.sandilos]

The parts are for my 1990 Nissan 240SX hatchback that I’ve been in the process of converting to a JDM Nissan 180SX. I’ve collected these parts over the last year and a half or so for the project, but sadly I just haven’t had the time to devote the attention she deserves. I need to sell it because I’m moving at the end of the year and I’m not going to have a garage (boo).

Please email me for more information, prices (flexible), or more pictures. I’m very flexible so please make me an offer if you’re interested… I just need to get the stuff out of my garage ASAP.

Pics are here - http://s183.photobucket.com/albums/x225/GreeksNotDead/


CHASSIS – $1400 w/ upgraded suspension, $500 w/ stock suspension (negotiable)

1990 Nissan 240SX hatchback w/ 156,000 miles:

- Decent body, some paint patina but no major dents
- Rear seats, carpet, headliner, and rear panels removed
- Dash removed for access to the wiring harness
- Stock motor, SOHC KA24E, has been removed

SPL Parts Racing Full Coilovers w/ Camber Plates (http://splparts.com/)
· Only 20 miles on them, never driven hard
· 8 kg/mm front, 6 kg/mm rear spring rates
· 15-way damping adjustment
· All documentation (instructions, etc.)

- Revo Technica front tie rods
- New OEM front lower control arms w/ ball joints
- Battle Version rear upper control arms
- All other stock control arms have new Energy Suspension Polyurethane bushings
- Stock 15” alloy wheels
- Steel wheels
* All nuts / bolts / hardware retained


CLUTCH / FLYWHEEL – $800 negotiable

Exedy Racing Stage 2 Cerametallic Clutch Kit (Exedy Kit # 06590B) w/ Exedy 12 lb Racing Flywheel (Exedy # NF02). Kit includes:

- Stage 2 Pressure Plate
- 3-Puck Cerametallic clutch disc
- 12 lb Racing Flywheel
- Throwout Bearing
- Alignment Tool
- Hardware (alignment bushing, alignment pins)
- Installation instructions w/ Exedy decal



Email me if you're interested, have questions, etc: the (dot) sandilos at gmail (dot) com

[chris4130]

I'm interested in the chassis and the engine.

Could you please send pics of the chassis to [email protected]

[S13Koop]

why is this not posted on the local forums?

[burgy240]

willing to sell just motor and tranny and no wiring etc.... also willing to ship?

[the.sandilos]

I haven't posted it on the local forums because I've been pretty busy w/ work and, honestly, I've been out of the local scene for a while and I'm not sure which one's the 'local' forum. Any suggestions for better exposure would be much appreciated.

[the.sandilos]

I've added some pictures of the clutch, the suspension, and the chassis.

I'd be open to selling the motor/tranny only, but I'd need to look into shipping first.

[the.sandilos]

Anyone interested in the suspension or the clutch kit ?

[jrocslider]

www.houston240sx.com

[the.sandilos]

Thanks homie.

[jrocslider]

anytime man. might be better also cause you wont have to bother with shipping stuff. guys on there are pretty cool. and you guys have a way bigger scene out there than in sa. good luck with ur sale of good quality parts.

[d0pe240]

how much do you want for the coils?

[the.sandilos]

I'm asking $900 because they have so little mileage, but I'm flexible.

[the.sandilos]

Anyone need a nice new clutch and flywheel?

[the.sandilos]

Alright gents - the coils, front tension rods, and BV RUCAs are now off of the chassis. I'd let the whole shebang go for $900 (coils, rods, RUCAs).

I also still have the clutch/flywheel kit...don't want it, don't need it, I'll sell it for $500.

Email me @ [email protected] ([email protected]) if you're interested.