Complete Part Out 1990 HB in San Diego

[Twiztid240]

Everything must go. Car was rear ended about one month ago, so rear bumper, and quarter panels are junk (unless you can fix them). Rear lights came out unscathed. I'm taking best offer on all parts (within reason). Reply with part wanted and your offer. Now let’s get these parts sold.

[DRavenS13]

What's the condition of your engine, and how much are you willing to sell it for?

[iknowyoulike]

quote me for the entire ebrake assembly shipped to 55110 please thanks!!

[email protected]

[qt_240]

what color was the interior?

[Twiztid240]

What's the condition of your engine, and how much are you willing to sell it for?

The motor has 164,000 miles and was still running strong. It has a reconditioned head (installed at 151,000 miles), which cost me $700.

I'm asking $500 for the motor.

[Twiztid240]

quote me for the entire ebrake assembly shipped to 55110 please thanks!!

[email protected]

I sent you an email.

[Twiztid240]

what color was the interior?


It has a black interior; however, not a lot is left of the interior. I still have the front seats, rear side panels, and the trunk panels.

[IchigoMae]

How much for a drive axle?

[burnsauto]

front lip? (if it had one...)

[brokeAs240sx]

what is the color of the exterior? passenger door available?

[Project3328]

hey can i get the rear side panel for the drivers side? pics please?

[posdriftin]

i would be intersted in the tank and fuel pump assembly... pm how much please

[Bobafreak]

i would like all the ac components please. if available. shipping to 91730 or i can pick it up.

[Twiztid240]

How much for a drive axle?

all ready sold

[Twiztid240]

front lip? (if it had one...)


Did not have the front lip

[Twiztid240]

what is the color of the exterior? passenger door available?


car is red, and yes I still have the door.

[Twiztid240]

hey can i get the rear side panel for the drivers side? pics please?

If we are talking interior the only thing left is the front seats.

If we are talking body panel then it was damaged when I got rear ended, which mean if you still want it its yours.

[nissan180sxer]

still have the driver side fender? if so whats the condition and how much?

[jflor004]

Manual or Auto? I'm in need of Manual parts

[Twiztid240]

still have the driver side fender? if so whats the condition and how much?


yes, original paint, scratches, and rock chips. No dents. $80

[Twiztid240]

Manual or Auto? I'm in need of Manual parts

Manual Transmition

[jflor004]

How much for the parts neccessary to run 5 speed?

[Twiztid240]

How much for the parts neccessary to run 5 speed?

$200 for the transmission. I should have it out of the car this weekend.

[jflor004]

Everything but tranny. Like clutch, pedals, lines, etc.

[tdub377]

Dash have any cracks???

[dorkjoey240]

do you have the main plugs for s13 flip lights?

[Twiztid240]

Everything but tranny. Like clutch, pedals, lines, etc.

the clutch will be sold with the tranny, clutch pedal has been sold, still have the lines and clutch master cylinder.

I'm not sure what you need, do you have a manual already? or do you need all the supporting parts (lines, master cylinder)

[Twiztid240]

Dash have any cracks???

Dash has been sold

[Twiztid240]

do you have the main plugs for s13 flip lights?

I still have all the headlight componets. Do you need the plugs to the light?

[jflor004]

the clutch will be sold with the tranny, clutch pedal has been sold, still have the lines and clutch master cylinder.

I'm not sure what you need, do you have a manual already? or do you need all the supporting parts (lines, master cylinder)

Yeah I need the supporting parts.

[90240sr]

all nuts, bolts and hardware for the front bumper. and the drivers side headlight plastic. i can pick it up in san diego on sunday.

[dorkjoey240]

I still have all the headlight componets. Do you need the plugs to the light?
yes, I really need plugs for it.

[Twiztid240]

Yeah I need the supporting parts.

Hydralulic Lines $20
Master Cylinder $50
Slave Cylinder $20

[d0ugch0i]

do you have the gas measuring valve?? where it measures how much gas you have in your tank?? PM me. i dont know how to use this site that well so PM me please.

[Twiztid240]

I just wanted to let everyone know that I'm also willing to take trades for parts as well. Still have a lot to get ride of (motor, tran, front and rear suspension, fenders, bumper, hood).

[stinky_180]

Are the mirrors power or manual? if so, what color are they; do you have the interior trim piece, do both mirrors have mirror? Do you have the ka starter still? Will you be available Sept 2nd?

Where in SD are you located? Northern or southern end of SD? let me know via PM! Thank you.

[stinky_180]

thanks for the parts nick!!! theres lots of parts left people, go get his chit!

[Twiztid240]

I'll be moving soon and need to get rid of everything. Here is a quick price list for the major parts.

Motor with a reconditioned head $200 (it cost me $700 just for the head)

Transmission with all the lines and master cylinder $200 (great for an auto to manual swap)

Shell with motor and tranny $500

[xtrmnop]

How's the condition of hatch? If no rust and holes - how much you willing to part out with it. Also you have the center garnish below the rear taillight? Let me know cuz I live in SD also.

[Twiztid240]

How's the condition of hatch? If no rust and holes - how much you willing to part out with it. Also you have the center garnish below the rear taillight? Let me know cuz I live in SD also.

I'm keeping the hatch and the center garnish has been sold.

[s13gold]

do you have the screws for the trim in the trunk...its where the latch locks.

let me know.

[Symyn240]

Can you send pics of the bumper, and i need the radio bracket and clutch hard line. Im in s.d and can pick up. Also how bout the LCA and the tension rod brackets. Do you have any of the power steering stuff?