KA24DE stuff, S13 Harnesses, clutch, s14 parts

[gotta240]

I've got tons of s14 stuff.

2- ka24de rebuildable motors

1- Exedy OEM replacement clutch, freshly mated to the flywheel. About a thousand miles or less, willing to sell WITH OR WITHOUT flywheel.

1- S14 manual tranny- grinds when racing. Shifted normal while driving normal 75 bucks...TAKE IT

2- 300zx rotors- freshly turned

2- bradi(same quality/reputation as brembo) rear slotted rotors- 100 bucks (cost 160 plus ship)

S14 Starter

S14 Alternator

S14 Power Steering pump

S14 Distributor

S14 Windows- ALL OF THEM

S14 Interior parts- No belts, no seats, no dash, no radio trim

S13 Wiring Harness- Complete... Upper and Lower harness UPPER HARNESS IS S O L D

S13 Distributor and Coil Dizzy is S O L D (still have coil)

Pm me if interested. I'll be in irvine at the drift event tomorrow, SUNDAY. I can bring parts if notified by tonight.

[P_856]

what year s14 was the clutch and flywheel pulled from

[lil240sx95]

are any of those KA's 96? if so do you still have the A/C compressor?

[gotta240]

I really don't think it matters what year the clutch/fly were pulled from. As far as in know, they are interchangeable..

Exedy clutch/pressure plate is only 3 months old.


Lil240sx95- Yes, i believe i have an ac compressor from a s14. I think it came from a 95, but i don't see how that could possibly be any different than a 96...

[pablo180]

gotta240,

I just sent you a PM.

Thanks,
Pablo

[NISMO500]

What year is the s14, i was interested in the power steering pump

[gotta240]

powersteering pump from a 95... Why does it matter? A s14 pump should be an s14 pump... 95-98...correct?

[lil240sx95]

well thats what I thought about the compressor, but nah it has to be another 96! thanks though

[gotta240]

Really?! I guess i learned something!!! Thanks and good luck with finding one!!!

[xtrmnop]

How many miles on tranny? And where in So Cal you in?

[gotta240]

located in san diego. Tranny has aprox. 140k. miles...

S13 harness and distributor S O L D

[kafanylovesme]

any pics of the motors you have? and what year?

[DALAZ_68]

wouldnt happen to have S13 dohc TB
cuz i need it and willign ot overnight it :aw:

[gotta240]

Yes, i do have the s13 DOHC throttle body... (was really hoping to sell it with the complete intake manifold).

I suppose I'd consider splitting if the price is fair. Pm me a fair offer if interested.

thanks!

[Phoenix_95]

Good seller right here :bigok:

[Panda240]

Can you post pics of the airconditioning unit? I might be interested in that.

[oldschools12]

how much for the lower harness shipped to 60081?

[sw20>>s14]

was the flywheel resurfaced at the time of clutch install?

how much for the set shipped to CA, 94403? thanks!

[gotta240]

Lower harness shipped = 45 bucks.


sw20>>s14- I'm pretty sure it was reserfaced when the new cluth was put in. Flywheel, pressure plate, clutch for 130 shipped. (just cause theat fly is HEAVY)

[sw20>>s14]

will the flywheel bolts be included? one less thing i need to source for my swap...and just out of curiousity, how much for the flywheel alone shipped to the same location? thanks!!!

[gotta240]

flywheel is 30 picked up, 50 shipped. I'll see what i can do about the flywheel bolts.

http://i112.photobucket.com/albums/n169/mrmikeman/ClutchesExedyandvaleomadeinkorea006.jpg

[gotta240]

http://i112.photobucket.com/albums/n169/mrmikeman/ClutchesExedyandvaleomadeinkorea008.jpg

[gotta240]

Here are pics of the exedy clutch, pressure plate, and the stock flywheel. sorry it took so long!!!

[Nikeboy355]

Interested in the PS pump and the clutch... I PM'd you...

[JRwerks]

HOw much for the starter?... oem starter?... located?

[gotta240]

pm replied.

I have an oem starter for 40 bucks plus shipping.

Located in san diego, ca.

[shortandsour]

what year are the engines? and how much do you want for them?

[JRwerks]

will u take $30 plus shipping?
and are they running motors?
pme me thanks

[gotta240]

I'll take 35 plus exact shipping, and i'll provide the box and packing free. thats as low as i can go...and is pretty darn cheap!!! :-)

The motors aren't "running". One has a bad head with a good block(has 200k. miles on it though)... Another one was overheated badly....

Engines are ka24de...Exact years i don't know...They did come out of s14's i've had though.

[Vernal]

PMed you about lower harness. Since I saw you are located in San Diego, how much shipped to 91506?

[gotta240]

Let me see if i have one still. S13 or s14?

[Vernal]

Let me see if i have one still. S13 or s14?
If you are talking to me, I need an s13 manual ka24de lower harness.

[gotta240]

How does 55 bucks shipped to your door sound? Its pretty hard to find a separate one, and this is complete...

Let me know either way. (oh, and i'll be in willow springs sunday if you are near there)

[Vernal]

How does 55 bucks shipped to your door sound? Its pretty hard to find a separate one, and this is complete...

Let me know either way. (oh, and i'll be in willow springs sunday if you are near there)
Seperate from the upper? Thats rare? I thought they were all that way. Anyway as long as its complete dohc and manual I will send you the money tomorrow. Whats your paypal email?

[gotta240]

Just pmd you

[DALAZ_68]

yo man was wondering if u knew if a stock pressure plate could work on my Exedy clutch....any idea...if so im really intrested in the p plate please hit me up on my email [email protected]

[gotta240]

Yes, but it comes with the clutch.

I have an actual exedy brand clutch and pressure plate that are practically brand new. STOCK REPLACEMENT for 90 bucks picked up.

I have another one, not sure of the brand, in good shape for 60 bucks picked up.

Will ship at buyers expence(exact shipping cost only)

[vnandy2k]

how much for s14 shifter trim shipped to 92703?

[gotta240]

Dont have it.. Sorry

[Vernal]

Did you send out the lower harness yet?

[TURBOvq35]

how much for the s14 dizzy shipped to 30044

[gotta240]

Vernal- i pm'd you a little earlier. Problems.. :-(

Turbovq35- 60 shipped for dizzy with cap/rotor

[gotta240]

Vernal- SHIPPED priority. Hopefully will be there tomorrow. HOPEFULLY!