LongGrain
08-15-2007, 08:25 PM
any parts are up for grabs, let me know what you need, and make an offer, unless its a part i have a price for.
i have a complete CA18 motorset, its built, some very nice parts. its all freshly rebuilt, 0 miles, etc. here goes
bottom end parts:
block: freshly bored 1mm over for tomei forged pistons (for sale also)
also decked and hot tanked, painted cast coat, comes w/ ARP headstuds (or will part separately) hones are still nice and shiney!
crank: fully balanced, and semi polished crank, new clevite rod and main bearings
rods: matched and balanced rods.
Tomei forged turbo pistons, used in excellent condition, tops polished, 1mm overbore w/ brand new rings, looking for $450 for these w/o rings, $500 with.
oil pan: stock CA18DET oil pan, cleaned and painted black, w/brand new gasket.
motor mounts w/ brackets
brand new oil pump, used water pump, all various brackets and pumps, alternator, PS, etc also available!
Top end parts:
freshly rebuilt, and cleaned head, painted aluminum. stock CA18DET cams, new valve stem seals included. all lifters included.
non-turbo crossover style intake manifold, perfect if you want to run a water-air IC setup, or if you want to be a baller and have your CA look like an RB.
CA18det fuel rail.
XS top mount stainless steel manifold. brand new, never used T3/T4 flanged, with 38mm wastegate flange. ($120 for this)
valve covers painted black, these are pulsar, they dont have the huge rectangles on them. (their painted pink in the pictures tho)
coil packs and CAS, various other sensors,
willing to part anything really, or package deals, i can let the entire bottom end go, and all you have to do is bolt it up to your CA swap and you instantly have a built bottom end. just give me your offer on any part really and i'll see what i can do. i just want this stuff gone. a lot of money went into this build, lots of machine work, cleaning, etc. i just want to get some cash out of it...
willing to ship!
theres a lot more parts that i didnt list, but feel free to ask. most of these pics are from BEFORE the machine work and cleaning. i assure you, everything is SPOTLESS, and most superficial parts are painted.
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown6.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown7.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown5.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown4.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown3.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown2.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown1.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/pistons.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/motormounts.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/fuelrail.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/ca18decleaned.jpg
i have a complete CA18 motorset, its built, some very nice parts. its all freshly rebuilt, 0 miles, etc. here goes
bottom end parts:
block: freshly bored 1mm over for tomei forged pistons (for sale also)
also decked and hot tanked, painted cast coat, comes w/ ARP headstuds (or will part separately) hones are still nice and shiney!
crank: fully balanced, and semi polished crank, new clevite rod and main bearings
rods: matched and balanced rods.
Tomei forged turbo pistons, used in excellent condition, tops polished, 1mm overbore w/ brand new rings, looking for $450 for these w/o rings, $500 with.
oil pan: stock CA18DET oil pan, cleaned and painted black, w/brand new gasket.
motor mounts w/ brackets
brand new oil pump, used water pump, all various brackets and pumps, alternator, PS, etc also available!
Top end parts:
freshly rebuilt, and cleaned head, painted aluminum. stock CA18DET cams, new valve stem seals included. all lifters included.
non-turbo crossover style intake manifold, perfect if you want to run a water-air IC setup, or if you want to be a baller and have your CA look like an RB.
CA18det fuel rail.
XS top mount stainless steel manifold. brand new, never used T3/T4 flanged, with 38mm wastegate flange. ($120 for this)
valve covers painted black, these are pulsar, they dont have the huge rectangles on them. (their painted pink in the pictures tho)
coil packs and CAS, various other sensors,
willing to part anything really, or package deals, i can let the entire bottom end go, and all you have to do is bolt it up to your CA swap and you instantly have a built bottom end. just give me your offer on any part really and i'll see what i can do. i just want this stuff gone. a lot of money went into this build, lots of machine work, cleaning, etc. i just want to get some cash out of it...
willing to ship!
theres a lot more parts that i didnt list, but feel free to ask. most of these pics are from BEFORE the machine work and cleaning. i assure you, everything is SPOTLESS, and most superficial parts are painted.
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown6.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown7.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown5.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown4.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown3.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown2.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/teardown1.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/pistons.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/motormounts.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/fuelrail.jpg
http://i34.photobucket.com/albums/d123/LongGrain/240%20buildup/ca18decleaned.jpg