G35 Brembo question

[hustlervibes]

I'm thinking about upgrading to the G35 Brembo setup on my 98 S14 SE. I know I need new brake lines (Z32 iirc), but I have found it hard to find install info on the rears. From reading all of the STi/EVO setups the rears use the STI caliper and 300ZX Brembo rotor to allow for the 300ZX ebrake assembly. For now I'm not all too concerned about the ebrake, but will the setup bolt on with spacers or something? Or will it take more work and require some sort of bracket to be fabricated? If no one has answers to this then I guess I'll be a tester of sorts.

Edit: I totally forgot to mention exactly what I was doing incase it wasn't clear enough.

I was planning on using the Z32 cables and G35 rotor and caliper. If a different setup is needed please inform me. Thanks :)

[hustlervibes]

On more thought, do I just need to drill out the rear mounting holes like the front? Or is the rotor also at the wrong offset or whatever it's called for brakes.

I'm sorry, I am pretty noob at this and have yet to see anyone post up rear brakes for a brembo Z33/G35

[idriveattz32]

as far as I know the rear caliper should be fine, Im almost positive that the bolt holes are the right size as well...good luck

[cgguy]

Easiest way would be to find an adaptor bracket (if anyone makes one), or fab up your own. Everything else in theory should fit fine.

[projectRDM]

For the fronts, the V35/Z33/R33/R34 Brembos bolt up by just drilling the spindle holes to 14mm (9/16"). The Z32 lines will work fine.

In the rear, only the STi Brembos bolt up, using a Z32 rotor. The EVO calipers can be adapted as well with a spacer IIRC, but the Nissan stuff won't work without a custom bracket since the mounting ears are farther apart.