Pitchblack98
08-07-2007, 12:12 PM
I have a 96 SE I have been parting out locally for a while now. It seems the interest had died off on what I have left so I thought I would throw the rest up there. This is all located in Littleton, CO.
There are no front body panels, ECU, interior, or 5 lug hubs. The 5 lug hubs are going on my S14 as soon as I source the rest of my 300zx brakes. The motor, tranny, and driveshaft are also gone. The car was an automatic.
Here is a list off the top of my head that I know I have... All body panels are primered black.
-Complete airbag system. Black steering wheel, Driver side bag, passanger side bag, wiring harness, and controller.
-Complete uncut (except for radio plugs) interior wiring harness. No engine bay harness.
-Climate control unit. Buttons are faded and turning white where the black is rubbing off.
-Brake booster
-Brake Master Cylinder
-All glass except windshield
-Front and rear brake calipers.
-Front 5 lug rotors. Rear 5 lug rotors are worn, but can be used if in a bind.
-Front factory Struts. Rears are blown.
-Front sway bar and end links.
-Misc. suspension parts. Just tell me what you need. Front and rear are pretty much complete except for 5 lug hubs and rear sway bar.
-Rear axles
-(2) good rear differentials. They are not LSD's, but would be good for a welded diff keeping your stock one as a spare.
-Good gas tank.
-Good driver and passanger door.
-Both power mirrors
-Zenki tail lights
-Zenki rear bumper cover
-Front bumper support
-Rear bumper support
-Complete sunroof assembly including glass
-Power window assembly
-Door lock actuators
-(2) SE rear spoiler
-I have a piece from a Bomex body kit that mounts on the hood and makes the zenki look like a kouki.
-Good SE trunk lid with holes for OEM wing. Had aftermarket wing installed at sometime, So there are holes drilled for it. I can weld them up and smooth them out if someone wants the trunk lid. I can also weld up the OEM wing holes if someone wants one with no holes at all.
I also might have a walbro 255 fuel pump. I have not confirmed this yet, but was told there is one in the tank. I will find that out for sure this weekend when I pull the sending unit to fix my gas guage.
I will also sell off the bare chasis if anyone wants to build a track car. It has no title and no chance of getting one unless you can find a way to track down the previous owner or swap your VIN plate if your is wrecked. lol... I don't care what is done with it. I just want it gone. I will leave the body intact if someone wants it. ie. doors, trunk lid, rear bumper cover, tail lights, etc. The car is straight. Only damage is a dent in the passanger door. I have another straight door for it. I am not selling the damaged door. If no one wants the chasis I will cut it up for scrap and haul it off to the yard.
If there is something you need that I didn't list let me know and I will see if I have it. I dont have any pics at the moment. Most of the parts are still on the car. I will start taking some as I start stripping the rest of the chasis.
As for prices... I have no idea what to ask for any of this. I just dont want this stuff sitting in my garage once the rest of the car is gone. Any reasonable offer will be considered. Just take into account the size, weight, shipping, and my time involved with pulling the part and boxing it up. I know I'm pretty new here so if anyone wants references I can provide them or you can google my username. You will find countless other forums I frequent and sell on. 2gnt.com, mazdabscene.com, teamsolcolorado.org, and caraudio.com just to name a few.
I am also interested in trades for almost anything useful... LSD rear end, 5 speed manual trans, aftermarket suspension parts, electronics (ipod, audio, etc.). Just throw out an offer and we can figure out details.
S15 front end conversion. SOLD
There are no front body panels, ECU, interior, or 5 lug hubs. The 5 lug hubs are going on my S14 as soon as I source the rest of my 300zx brakes. The motor, tranny, and driveshaft are also gone. The car was an automatic.
Here is a list off the top of my head that I know I have... All body panels are primered black.
-Complete airbag system. Black steering wheel, Driver side bag, passanger side bag, wiring harness, and controller.
-Complete uncut (except for radio plugs) interior wiring harness. No engine bay harness.
-Climate control unit. Buttons are faded and turning white where the black is rubbing off.
-Brake booster
-Brake Master Cylinder
-All glass except windshield
-Front and rear brake calipers.
-Front 5 lug rotors. Rear 5 lug rotors are worn, but can be used if in a bind.
-Front factory Struts. Rears are blown.
-Front sway bar and end links.
-Misc. suspension parts. Just tell me what you need. Front and rear are pretty much complete except for 5 lug hubs and rear sway bar.
-Rear axles
-(2) good rear differentials. They are not LSD's, but would be good for a welded diff keeping your stock one as a spare.
-Good gas tank.
-Good driver and passanger door.
-Both power mirrors
-Zenki tail lights
-Zenki rear bumper cover
-Front bumper support
-Rear bumper support
-Complete sunroof assembly including glass
-Power window assembly
-Door lock actuators
-(2) SE rear spoiler
-I have a piece from a Bomex body kit that mounts on the hood and makes the zenki look like a kouki.
-Good SE trunk lid with holes for OEM wing. Had aftermarket wing installed at sometime, So there are holes drilled for it. I can weld them up and smooth them out if someone wants the trunk lid. I can also weld up the OEM wing holes if someone wants one with no holes at all.
I also might have a walbro 255 fuel pump. I have not confirmed this yet, but was told there is one in the tank. I will find that out for sure this weekend when I pull the sending unit to fix my gas guage.
I will also sell off the bare chasis if anyone wants to build a track car. It has no title and no chance of getting one unless you can find a way to track down the previous owner or swap your VIN plate if your is wrecked. lol... I don't care what is done with it. I just want it gone. I will leave the body intact if someone wants it. ie. doors, trunk lid, rear bumper cover, tail lights, etc. The car is straight. Only damage is a dent in the passanger door. I have another straight door for it. I am not selling the damaged door. If no one wants the chasis I will cut it up for scrap and haul it off to the yard.
If there is something you need that I didn't list let me know and I will see if I have it. I dont have any pics at the moment. Most of the parts are still on the car. I will start taking some as I start stripping the rest of the chasis.
As for prices... I have no idea what to ask for any of this. I just dont want this stuff sitting in my garage once the rest of the car is gone. Any reasonable offer will be considered. Just take into account the size, weight, shipping, and my time involved with pulling the part and boxing it up. I know I'm pretty new here so if anyone wants references I can provide them or you can google my username. You will find countless other forums I frequent and sell on. 2gnt.com, mazdabscene.com, teamsolcolorado.org, and caraudio.com just to name a few.
I am also interested in trades for almost anything useful... LSD rear end, 5 speed manual trans, aftermarket suspension parts, electronics (ipod, audio, etc.). Just throw out an offer and we can figure out details.
S15 front end conversion. SOLD