PDA

View Full Version : FS: S14 Front and Rear Brakes

autobahNESSA
08-04-2007, 01:18 PM
Shoot me an offer for these things:

S14 Front brakes off a zenki. Decent amount of pad left. Rotors in good condition. One side has a 4 lug hub still on it. Brake lines attached.
http://www.we-todd-did-racing.com/pfiles/7686/DSCN0078.JPG
http://www.we-todd-did-racing.com/pfiles/7691/DSCN0085.JPG


S14 Rear brakes off a zenki. Decent amount of pad left. Brake lines and e-brake cables still attached.
http://www.we-todd-did-racing.com/pfiles/7687/DSCN0079.JPG


S14 Rear rotors predrilled 4/5 lug off a zenki. 8.9mm left (minimum recommended 8.0mm before replacement).
http://www.we-todd-did-racing.com/pfiles/7688/DSCN0082.JPG


S14 Front brakes off a kouki. Lots n lots of pad life and rotor life left. Brake lines attached.
http://www.we-todd-did-racing.com/pfiles/7689/DSCN0083.JPG
http://www.we-todd-did-racing.com/pfiles/7690/DSCN0084.JPG
sicarius82
08-04-2007, 02:11 PM
.........pm'd...
slammed180ssx
08-04-2007, 09:24 PM
hey. will the 4 lug s14 calipers and brackets bolt up to a s13 Ca brake system? mine are toast and i cant get rotors or pads so i need to do a swap. lmk. i really need brakes. lol thanks

Brad
autobahNESSA
08-05-2007, 09:22 AM
Yeah, they're all the same as far as being able to bolt up. The actual pad type and caliper size may be slightly smaller on the USDM cars. I know they're different on some models. Check your PM.
autobahNESSA
08-30-2007, 04:01 PM
bumpo !
EDacIouSX
09-04-2007, 10:29 AM
i think there's a distinction btwn early n late zenki 95 + 96/97/98 calipers and btwn non-abs and abs. i forget just look up some stock s14 pads. i think s14 calipers are > s13 too fyi.
steve s14
09-04-2007, 06:12 PM
s14 zenki's and non abs s13's have crappy brakes, s14 kouki's and s13's with abs, have better brakes. The s14 kouki's and s13's with abs have rotors that are slightly larger, the calipers and pads that are slightly bigger.

Any of the calipers will bolt on without any modifying. However, if the rotors do not have the correct lug pattern, for example, you have a 4 lug kouki rotor and caliper and want to use it on an SE s14 zenki, you will have to either redrill or buy the rotor with the correct lug holes.