KA-T Parts,HKS,Turbonetics,PLX wideband,sparco,tial,walbro,650cc,etc!!!

[the bee guy]

BRAND NEW XS-Power Front mount intercooler kit for S13 SR20DET, comes with all T-bolt clamps - $310 shipped

Turbonetics T3/TO4E, 50 Trim, .63 A/R, Stage II Turbine wheel. Minimal shaft play within spec. Spins freely, used only 2000 miles.
$500 shipped

BRAND NEW XS-Power KA24DE Turbo manifold. Version 2 with support brackets. Top mount, will fit both T3 and T4 turbos.
$120 shipped

HKS EVC IV Electronic boost controller. Great condition, comes with all wiring and solenoid you need.
$220 shipped

Sparco Sprint Seat used but in good condition, just dusty. No rips or tears, just missing 1 back seatbelt hole trim.
$150

BRAND NEW Tanabe Drift Spec S14 Front and Rear sway bars. Comes with Brand new Energy Suspension End Links and D-Brackets.
SOLD!!!!!!

APEX'i SAFC II Black, Great condition, comes with all wiring you need.
$220 shipped

BRAND NEW Aeromotive rising rate Fuel Pressure Regulator.
$125 shipped

HKS Super Sequential Super Blow Off Valve. Only used for 10 miles! Includes aluminum flange, o-ring, and C-Clip.
$180 shipped

Momo S13/s14 steering wheel hub
30 shipped

Z32 MAFS. Excellent condition, and also includes pigtail!
SOLD!!!!!!!!

PLX M300 Wideband o2 meter with sensor and all wiring. Used only twice!
$270 shipped

BRAND NEW Walbro 255 fuel pump with install kit.
$110 shipped

BRAND NEW Deatchwerks 650cc Injectors, still in wrapping!
$300 shipped

BRAND NEW Tial 38mm external wastegate with .5bar spring!
$200 shipped

MANDREL BENT PIPING AND
$SOLD!!!!!

BRAND NEW 3 bolt flange and 5 bolt turbo flange
$25 shipped

BRAND NEW Goodrich -3an Oil feed line kit . Includes T fittings and everything you need to tap from oil sensor to turbo.
SOLD!!!!!!!!

BRAND NEW Black exhaust heat wrap.
SOLD!!!!!!!

BRAND NEW Summit racing Liquid filled Fuel pressure gauge.
$20 shipped

S13 OBD1 KA24DE 5spd ecu
$60 shipped

BRAND NEW JGS Vacuum block!
SOLD!!!!

All paypal transfers please add 3%, thats not too much to ask.

NON REFUNDABLE deposit of 50% required on any part you want me to hold for you.

For local pickups, I am Located in Southern California, 909/951 area.

Here are some pics to wet your whistles =D


http://i44.photobucket.com/albums/f46/thebeeguy/walbro1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/vacuumblock.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/Turbointercooler5.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/turboandmanifold4.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/turboandmanifold3.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/turboandmanifold1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/dw1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/tial1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/esbrackets.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/sparco1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/sparco2.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/safc2.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/s13ecu2.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/s13ecu1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/plx2.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/plx1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/piping.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/momohub.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/hksevc1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/hksbov2.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/hksbov1.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/fuelpres.jpg

http://i44.photobucket.com/albums/f46/thebeeguy/fuelgauge.jpg

[vutony]

are u sure thats a momo hub

$20 piked up

[the bee guy]

Not 100% sure. Has no markings on it. Bought it a long time ago and kinda remember the guy saying it was a momo hub. Either way it worked with my Nardi perfectly.

$20 picked up is kool. I'll PM you my number.

[the bee guy]

bump this post, lots of good stuff here guys!

[j20accord00]

do u happen to have the 38mm flange for the wastegate?

[adrians_s13]

bov 150 picked up? :)

[the bee guy]

do u happen to have the 38mm flange for the wastegate?

I have the dump pipe flange for it yes.

Adrien S13 you got a PM

[nateb]

sparco shipped to 07728 do u have a bracket
and slider for it??
fmic (if its for a s13) shipped to 07728

pm me or email [email protected]

[the bee guy]

FMIC Is for S13, $310 shipped (plus 3% paypal which is like $9) to you NATEB

[j20accord00]

hey whats up man i sent you a pm..let me know thanks

[mayco_86]

Damn this guy has some good deals going on. GL with the sell bro.

[the bee guy]

MAF, sway bars, oil lines, piping, heat wrap sold, everything else is still up for grabs!

[j20accord00]

MAF, sway bars, oil lines, piping, heat wrap sold, everything else is still up for grabs!

and I sent you a p/m but you never got back to me, let me know man

[the bee guy]

and I sent you a p/m but you never got back to me, let me know man

I never got your message

[kleenS14]

pm sent..msg lngth