Parting out S13 (Version 2)

[WideS13]

Ok, I tried selling the same stuff I'm listing here in an earlier post. I didn't put prices in it, and I got a million PMs for pricing, and the only thing that sold was a Greddy boost gauge. :( I figured it would be easier to waste a little server space and make a new post with the prices right on the first post. :)
*Prices are without shipping and pickup is prefered on the larger things if possable*

180SX Taillight Set/w lock set and keys, painted Nissan Midnight Blue $350

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1558.jpg

5Zigen Bronze FN01R-Cs *Front* 17x8.5+25 215/45/17 HRTZ II (90% tread) *Rear* 17x10+15 255/40/17 HRTZ II (90% tread) $780 (pickup prefered)

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1560.jpg http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1559.jpg

Sparco REV/w RJS 5pt cam-lock harness, eye bolt mounts with shoulder releases and base mount $290
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1571.jpg

Kazuma tie rod ends. $80
Peak Performance 5 bolt front hubs (the $650 new gold colored ones) with S14 rear hubs. $380
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1563.jpg

Z32 30mm Aluminum Front Calipers, cross drilled/slotted rotors (all 4 rotors, and are both drilled for 4 bolt or 5 bolt) and SS brake lines. $450

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1541.jpg

JGY front tension rod $60
JGY front lower subframe brace $40
Cheap ass front upper strut brace $40
Cheap ass rear upper strut brace $40

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1564.jpg

Cheap ass Ebay RUCA (Slightly worn bearing, imagine that!) $40
JGY rear toe rods. $60
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1565.jpg

Cheap ass Ebay Steering wheel/w hub and 5Zigen alluminum logo (off of the center caps from their wheels. $60
Nismo "dildo" Shift knob. $30
(Crappy photos, sorry)
S-AFC in an AVC-R case, din mounted (needs some touch up) $150
(Crappy photos, sorry)

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1567.jpg http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1569.jpg

An "Only God knows!" exhaust, with test pipe. $120
WeldLok V4 welded rear Diff $180
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1543.jpg

Megan Racing Street Coilovers with 2k miles on them. $500

CA18DET downpipe and 02 housing. $80

CA18DET intercooler piping with HKS flange. (not welded on yet) $40

Greddy Peak hold/warn EGT Gauge, White face 60mm, probe never used. $150

That's all I can think of for now. I need to try to have all of this sold and gone by the 12th of this month. I am leaving for Iraq and cannot store the car. If anyone wants to pick up the body of the car, they are welcome to have it for $400 with the reapolstered interior and everything. It needs a new radaitor core support, and some body work in the front. It is not bent, but I do not have time to deal with it and it does not have a salvage title. It has a AIT full body kit and 30mm Origon rear fenders. Here is what it looks like as it sits now.
http://i8.photobucket.com/albums/a32/wides13/DSCF1528.jpg http://i8.photobucket.com/albums/a32/wides13/DSCF1527.jpg http://i8.photobucket.com/albums/a32/wides13/DSCF1525.jpg

[xnyc]

dibs on
Peak Performance (http://www.zilvia.net/f/showthread.php?t=152559#) 5 bolt front hubs (the $650 new gold colored ones) with S14 rear hubs. $380
JGY front tension rod $60
JGY front lower subframe brace $40
JGY rear toe rods. $60

no problems with the bearings or studs on the hubs right? willing to do 520 shipped?

[TRUSE-R]

Whats up with the 180sx lights (the front square ones). Please PM me back with info. Also if xnyc doesn't get the JGY tension rods, I will get them. I have money ready.
Thanks,
KEN

[AznDrftr.]

I contacted you on those items i asked from the previous post. No words, let me know man since I had dibs on it already.

[undesiredshoe]

is the ca18 intercooler piping stock or aftermarket? If its after market, ill give you $60 shipped for it

[jdmae86]

I want the coilovers.. I have $ ready... please post/pm me your paypal email
I live in Greensboro, North Carolina... so would can I pick them up

AIM: ukamikaze

[WILDACEX187]

how much for the shifter surround?

[midnightouge]

how much for the nismo shift knob shipped to 94565?

[racepar1]

I'm interested in the kazama tie rod ends i'll send u a P.M.

[WideS13]

MR Coilovers are sold.
PMs replied on the 180sx corner lights.
PMs replied on the tie rod ends.

If you PMed me for something two weeks ago, PM me again. I had to delete most of those PMs to make room.

xnyc: PM me.
WILDACEX187: $15 it's actually new lol.
midnightouge: $40 shipped, PM me.

[WILDACEX187]

20 shipped? ??

[jdmae86]

Coilovers SOLD to me!! Thanks!

Goodluck in Iraq... Be safe & come home

[benefitx]

fuckk i wanted the coilovers

[bengal240sx]

GIVE A DEAL FOR THE RIMS AND THE HUBS!! ALSO SHIPPING QUOTE TO NYC 11106






:aw: Ok, I tried selling the same stuff I'm listing here in an earlier post. I didn't put prices in it, and I got a million PMs for pricing, and the only thing that sold was a Greddy boost gauge. :( I figured it would be easier to waste a little server space and make a new post with the prices right on the first post. :)
*Prices are without shipping and pickup is prefered on the larger things if possable*

180SX Taillight Set/w lock set and keys, painted Nissan Midnight Blue $350

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1558.jpg

5Zigen Bronze FN01R-Cs *Front* 17x8.5+25 215/45/17 HRTZ II (90% tread) *Rear* 17x10+15 255/40/17 HRTZ II (90% tread) $780 (pickup prefered)

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1560.jpg http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1559.jpg

Sparco REV/w RJS 5pt cam-lock harness, eye bolt mounts with shoulder releases and base mount $290
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1571.jpg

Kazuma tie rod ends. $80
Peak Performance 5 bolt front hubs (the $650 new gold colored ones) with S14 rear hubs. $380
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1563.jpg

Z32 30mm Aluminum Front Calipers, cross drilled/slotted rotors (all 4 rotors, and are both drilled for 4 bolt or 5 bolt) and SS brake lines. $450

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1541.jpg

JGY front tension rod $60
JGY front lower subframe brace $40
Cheap ass front upper strut brace $40
Cheap ass rear upper strut brace $40

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1564.jpg

Cheap ass Ebay RUCA (Slightly worn bearing, imagine that!) $40
JGY rear toe rods. $60
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1565.jpg

Cheap ass Ebay Steering wheel/w hub and 5Zigen alluminum logo (off of the center caps from their wheels. $60
Nismo "dildo" Shift knob. $30
(Crappy photos, sorry)
S-AFC in an AVC-R case, din mounted (needs some touch up) $150
(Crappy photos, sorry)

http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1567.jpg http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1569.jpg

An "Only God knows!" exhaust, with test pipe. $120
WeldLok V4 welded rear Diff $180
http://i8.photobucket.com/albums/a32/wides13/240sx/DSCF1543.jpg

Megan Racing Street Coilovers with 2k miles on them. $500

CA18DET downpipe and 02 housing. $80

CA18DET intercooler piping with HKS flange. (not welded on yet) $40

Greddy Peak hold/warn EGT Gauge, White face 60mm, probe never used. $150

That's all I can think of for now. I need to try to have all of this sold and gone by the 12th of this month. I am leaving for Iraq and cannot store the car. If anyone wants to pick up the body of the car, they are welcome to have it for $400 with the reapolstered interior and everything. It needs a new radaitor core support, and some body work in the front. It is not bent, but I do not have time to deal with it and it does not have a salvage title. It has a AIT full body kit and 30mm Origon rear fenders. Here is what it looks like as it sits now.
http://i8.photobucket.com/albums/a32/wides13/DSCF1528.jpg http://i8.photobucket.com/albums/a32/wides13/DSCF1527.jpg http://i8.photobucket.com/albums/a32/wides13/DSCF1525.jpg

[busyman_88]

hey i want the front brakes and calipers how much shipped to 97089 email me at [email protected]

[Edgar]

What size is that seat?
I'm interested PM me please

[WideS13]

UPDATE
5-Bolt hubs = sold
Tension rods = sold
RUCAs = sold
MR Coilovers = sold
Toe links = sold

[westcoastpj]

do u have the ignition cylinder wires?

[drftwerks]

is the intercooler CORE totally fucked?

[jdmae86]

did my stuff get shipped out?

[TRUSE-R]

I made payment on the 180sx position/corner lights and I sent you another PM regarding the 180SX Taillight Set/w lock set and keys, painted Nissan Midnight Blue $350. Please let me know when you can send out the lights.
Thanks,
KEN

[WideS13]

I made payment on the 180sx position/corner lights and I sent you another PM regarding the 180SX Taillight Set/w lock set and keys, painted Nissan Midnight Blue $350. Please let me know when you can send out the lights.
Thanks,
KEN
Sent USPS.. PMed about the tails

did my stuff get shipped out?
Yes, tracking number PMed.

is the intercooler CORE totally fucked?
Yes. Totaly fubar.

do u have the ignition cylinder wires?
huh? The spark plug wires? I'm not sure what you're asking for.

Update

What's left:
Wheels/Tires
180SX tail lights (pending)
Brakes/Rotors/SS lines
F/R strut braces
Lower front subframe brace
Wabro 255 (almost forgot about it)
S-AFC

[t . b o z]

are the wheels already sold?

[customboy75]

I'm still interested in the shell i'm just trying to figure out how to get it shipped to MN without costing a fortune! on another note, how much for the stainless brake lines?thanks

Joel

[jdmae86]

bump for a good seller... I recieved my coilovers 1 day after shipping :]

[Otis Performance]

Damn, you should have cut that radiator support out and did a v mount set up

[plane16j]

do you have coolant overflow tank & drivers side window amp? to 85040

[kafanylovesme]

if someone takes the whole car, what will be included?? for example, will the rims be included? and everything else pictured thats not sold yet?

[ryan619]

selling anything having to do with the transmission? im in need for a 5 speed swap

[lostmenoggin]

can you send some pics of ca18 intercooler piping to [email protected]? thanks.

[WideS13]

Sorry that I haven't posted on here in awhile. I have been kind of busy. I'm leaving thursday so I'm trying to get rid of all this stuff asap. What's left after thursday will be pick up only, and you'll have to deal with my wife. :loco:

are the wheels already sold?
No I still have them, If you want them shipped, you would need to get them before this Wed. Otherwise its going to be pick up only.

do you have coolant overflow tank & drivers side window amp? to 85040 The overflow tank is busted and I have manual windows. (If that's what it is for.) Sorry.

if someone takes the whole car, what will be included?? for example, will the rims be included? and everything else pictured thats not sold yet?It's just the body with the engine and eletrical stuff. most all of the suspension is gone, no wheels, tires, or lights. Right now It does still have a Warbro 255 and most of the stereo equiptment. I will probably sell if with the fuel pump in it. You know what, If you want the body and can pick it up, it's yours for $150.That is with what I have left still in it. How about that? I just need to get it out of my driveway.

selling anything having to do with the transmission? im in need for a 5 speed swapIf you can come get it, whatever you need. All the tramsmission stuff is sill on the car.
:2f2f:

[kabukie]

PM'ed..........................

[Edgar]

2nd try

can you please pm me more info on seat if you havent yet please

Sparco REV/w RJS 5pt cam-lock harness, eye bolt mounts with shoulder releases and base mount $290

[WideS13]

2nd try

can you please pm me more info on seat if you havent yet please

Sparco REV/w RJS 5pt cam-lock harness, eye bolt mounts with shoulder releases and base mount $290

A Local guy picked it up already, sorry.

[lostmenoggin]

what about the ca18 intercooler piping?

[fromxtor]

still have the shifter surround?

[WILDACEX187]

umm its been like 9 months. shouldve PM'ed

[miklos]

I need glove box hinges and driver door rubber.

[bigdreams05]

I need glove box hinges and driver door rubber.
:duh:It's been nearly a year he left for Iraq...

[yunk_s14]

damn yall had me all excited then i saw the date

[miklos]

I need the piece under the shifter boot. There are 4 screws that hold the boot.
Also the hinges to the glove box.
Do u have these?