PDA

View Full Version : Non PW to PW swap. Easily Do-Able?


Rikter
07-28-2007, 11:25 AM
Hey there,

I searched through all the FAQs and didn't come up with any for this swap. Is it easy to swap non power windows to power windows in a S13?

-Rik

ThatGuy
07-28-2007, 11:42 AM
Need door panels, switches, and motors. Then just run all the wiring. Not difficult. I traded a pair of power doors for a set of wheels a while back. The guy had the PW installed in my driveway in about an hour and half. It was his first time.

In other words... It's very do-able, and not difficult.

Most people ditch their PW to save weight anyway. All personal preference. I'm happy with hand cranks.

drewc87
07-28-2007, 12:20 PM
ill trade u my power for your non.

SiI40sx
07-28-2007, 01:04 PM
Or just swap the entire door, WAY easier haha. I think you have to take off the fenders to get to the door bolts though.....so maybe not that easy but easy still.

ThatGuy
07-28-2007, 01:12 PM
Yes, you have to remove the fenders to swap doors. Plus then your doors are a different color. Either way will work. Most time consuming is still the wiring.

Rikter
08-01-2007, 08:15 PM
Great, thanks for the replies guys. I was looking at an S13 but it had manual windows and i'm lazy and want power ( I drive with windows down 95% of the time and leaning over to hand crank all the time would get annoying ). I've got a few friends that are wiring guru's so i'll enlist their help.
Thanks!