WTB : KA Flywheel AfterMarket

[NiZMo1o1]

DOHC Flywheel , Fidnaza anything thats aftermarket , not looking for a OEM stock or shaving Flywheel..

[FRpilot]

i have a used ka fidanza aluminum flywheel from my old ka that blew a headgasket that i was going to use for my ka-t rebuild.

i overtorqued one of the six pressure plate bolt holes when i first installed it. The bolt still threads in but the bolt doesnt seem tightened all the way. if it really bothers you, you can always get a machine shop to retap it for you, but it worked fine and has never given me any problems.

the replacable friction plate is still in good condition, although i would replace it if you are doing a complete clutch job.

i also have a ka spec stage 3 clutch kit i used with the flywheel. it seemed like it was starting to slightly slip when i took it off, but should still be good for a couple thousand miles. my friend said that i can just get a new clutch disk when the old one wears out since the pressure plate is still good. if you want it, i can let the clutch kit go cheap.

i spent 300 for the clutch kit and 350 for the flywheel. give me an offer if you are interested.