sr20det install HELP!!!

[Drft_14]

hey guys, im fairly new to this place and i need help. im in the process of installing an ssr20det on my 240 and i need help on verifying some stuff. i've never done this before and any advice would be greatly appreciated. here's some pix and questions on them. i know they may sound really retarded but like i said i've never done this before...thanks..

[opponheimer]

#1 and #2 are for AC, if you dont have AC just leave them as is

#3 and #4 are for heater hoses. #3 goes to the lower hose coming out of the intake manifold. #4 goes to the upper hose on the back of the sr20. For #4 you'll need an S-shaped heater hose to curve back to #4 outlet from the motor

that is it

[ecuastyle84]

also make sure for the #4 hose...make sure you have the hose install on the motor before putting it in the engine bay because it will very difficult to put it in if the motor is already installed....the space will be very tight to reach. just a reminder

p.s. try using this to help you with your swap:
http://www.zilvia.net/f/showthread.php?t=62607

[Drft_14]

hey thanks a lot guys, it really helped a lot. imma post pics of the project soon. thanks again.