Bn-Sports s14 blister kit??

[3-240's-N-aMule]

Anyone have any idea where i can get one or who in the U.S. can import them for a kouki? I need one seriously bad...
http://i132.photobucket.com/albums/q25/dandanjames/thermastoragewebpage042.jpg

[20 til 3]

talk to a-spec ... everyone turns to him... but imo i wouldnt put a body kit on if you have wheels/ wide like that ...

[3-240's-N-aMule]

Who is a-spec. I dont think u understand. That is a pic with origin 20/50mm widebody fenders. The fronts are fine but back is a No. the blister kit i need is 50/70mm.

[chmercer]

you dont need bn for those wheels

you just put your fenders on wrong

[FRpilot]

i hope its wrong.. b/c if thats vs/origin i would say that fitment is crap. use that line on door/fenders as a guide.

[Edgar]

you dont need bn for those wheels

you just put your fenders on wrong

agreed

scroll down and search
http://www.zilvia.net/f/showthread.php?t=115916

[LB.Motoring]

The back isnt a NO.

the back should have been you squish your rear over fender together to get it to bulge out more, plus you need to figure in your camber etc.

it will fit, to bad your failtown so much with s-chassis knowledge.

I wanna see what it looks like under your rear overfender...

[Ian]

Yeah...cut the arches first...then put tires on...the put suspension on and get your alignment right...THEN fit the fenders

[CleanS14]

What size and offset are the wheels... almost anyone on this forum should be able to tell you if they will fit or not with those overs you got.

[A Spec Products]

< A Spec

YAY

Cept I don't carry BN Sports

There is a "BN Sports USA," but they are impossible to get a hold of, and I don't know anyone personally who has got BN from them yet

But yeah like people said in here, its not BN Sports that will magically solve the equation

Post sizes and offsets of wheels

[3-240's-N-aMule]

< A Spec

YAY

Cept I don't carry BN Sports

There is a "BN Sports USA," but they are impossible to get a hold of, and I don't know anyone personally who has got BN from them yet

But yeah like people said in here, its not BN Sports that will magically solve the equation

Post sizes and offsets of wheels
Magic wont, but an additional 30/20mm could help. Guys, the fenders arent mounted yet and they are actually pressed in abit to the car. Stock shocks, 0 camber and no nothin aftermarket is on the car other than wheels and fenders. I just put them up with tape to get an idea of what i was workin with.
18x10 -6f & 18x11.5 -21r. Before you break out the flame throwers, i figured this would be alot of work and would probably need modification to fenders to work. Ive seen crazier shit on here... Lol

[OptionZero]

you will need coils and RUCA/other susp arms

wtf u doing man

[CleanS14]

Magic wont, but an additional 30/20mm could help. Guys, the fenders arent mounted yet and they are actually pressed in abit to the car. Stock shocks, 0 camber and no nothin aftermarket is on the car other than wheels and fenders. I just put them up with tape to get an idea of what i was workin with.
18x10 -6f & 18x11.5 -21r. Before you break out the flame throwers, i figured this would be alot of work and would probably need modification to fenders to work. Ive seen crazier shit on here... Lol

Yah if you do the math you can live with a 20mm over in front, but definitely need a 50mm in the rear.

[3-240's-N-aMule]

Yah if you do the math you can live with a 20mm over in front, but definitely need a 50mm in the rear.
Well................. its already 50+ in the rear and 20+ in the front on the fender part. Thats the problem. I could live with it. But i could also live with a 2 inch penis but id kill myself sooner or later. Im not into the low rider look. So nobody knows where to get a bn-sports blister kit state side?

[CleanS14]

Well................. its already 50+ in the rear and 20+ in the front on the fender part. Thats the problem. I could live with it. But i could also live with a 2 inch penis but id kill myself sooner or later. Im not into the low rider look. So nobody knows where to get a bn-sports blister kit state side?

You're not into the low rider look? So what look are you into? The car won't look like a roller skate if you stick to a 20mm/50mm combo. If you go any wider, it will look stupid. Your stance will be :ghey: and the wheels a tad sunk in.

Here's a pic of 18x9.5 -23, 19.10.5 -10 w/ 30mm all around... your setup is equivalent to 11mm less in front and 22mm more out in the rear. This is with camber set to -3deg front and -3deg rear.
http://farm2.static.flickr.com/1373/608154760_abb4d35e7f.jpg

Seriously... what kind of look are you into? I'd like to think I'm giving you good advice so I won't comment anymore... but you can get BN from Matt @ http://www.thedorishop.com/ THE DORI SHOP (http://www.myspace.com/thedorishop)

[chmercer]

Im running more agressive rear wheels than you, with version select 30s

front too but thats moot

have someone else build your car if you dont know what youre doing

[Edgar]

thats too expensive

just learn the hard way and break shit like everyone else does lol

[blitz180]

Look, I know it seems like chmercer and everyone else are coming off like assholes, cuz they usually do on zilvia, it's just the community...and normally I think chmercer is an ass for the fun of it. BUT, when it comes to wheel fitment chmercer=ftw. Get the tires you want to run, mount them on the wheels, bolt up the wheels, and then play with the fitment of the 50mm wide. I think you can do it with the right suspension settings and playing with the fenders.

[3-240's-N-aMule]

You're not into the low rider look? So what look are you into? The car won't look like a roller skate if you stick to a 20mm/50mm combo. If you go any wider, it will look stupid. Your stance will be :ghey: and the wheels a tad sunk in.

Here's a pic of 18x9.5 -23, 19.10.5 -10 w/ 30mm all around... your setup is equivalent to 11mm less in front and 22mm more out in the rear. This is with camber set to -3deg front and -3deg rear.
http://farm2.static.flickr.com/1373/608154760_abb4d35e7f.jpg

Seriously... what kind of look are you into? I'd like to think I'm giving you good advice so I won't comment anymore... but you can get BN from Matt @ http://www.thedorishop.com/ THE DORI SHOP (http://www.myspace.com/thedorishop)

Wow. Good info. The pic with size/offset gives me hope of not looking so ghey. What rear is that on the silver car? You have any side shots of it?

[jobestudios]

I like the pink bicycle in the pic ;)

BN sports USA is pretty close to my shop, I talked to them yesterday at FD and should be setting up an account with them soon.

[smelly240]

vskf's i think

bn usa never comes through for me.

[chmercer]

that car has full vertex ridge widebody dude

you cant step to jay

give it up, sell your car

might as well put bomex on it

[Vision Garage]

Heres a picture of BN blister kit on a s14. Super wide.

http://img.photobucket.com/albums/v280/JonathonVivo/backview.jpg

[chmercer]

Whatever happened to that car? Did that guy ever finish? wasnt it a 14.5?

[sw20>>s14]

im curious to know where that car is and if anyone finished it too...iirc, it was a pretty sweet deal...

[Siizzzoooo]

wtf u doing man

:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

[LB.Motoring]

Whatever happened to that car? Did that guy ever finish? wasnt it a 14.5?

Yah it was a s14.5

but Im not sure it ever got finished....

[Edgar]

I had called him when I was out in Cali to look at it. I think he did sell it for like 5k with an SR that wasnt in the car.

[projectdrifter]

that 14.5 is now located in nc i believe. the guy moved hear and drives a s13 at events. he is still working on the s14.5 last time i talked to him.

[McRussellPants]

good lord.


18in Equip 01s.


good lord.


BN Blister...


good lord.


dude.


dude


Get the BN blister and then mould a bomex body kit into the fenders.


that would be


so sick.


you're not into low riders so you have 2in of wheelgap in mind already.


bomex with bn blister fender suits this project to a T

[Vision Garage]

yea, im not sure where he is. Last i heard he was doing some nascar racing stuff. So it is probably where he is.

[LB.Motoring]

Yup,

hes doing high speed Lefting.

[3-240's-N-aMule]

good lord.


18in Equip 01s.


good lord.


BN Blister...


good lord.


dude.


dude


Get the BN blister and then mould a bomex body kit into the fenders.


that would be


so sick.


you're not into low riders so you have 2in of wheelgap in mind already.


bomex with bn blister fender suits this project to a T

I already have full origin stylish kit for this. When i say " low rider" i meant more of the wheels stickin out by 3-6 inches or like CleanS14 said, "a roller skate". The car is a shell im workin on which is why it has no aftermarket sups. parts or anything yet(i just started). Just taped the fender on to get an idea of what i was workin with. LB.Motoring... It looks like a normal fuckin uncut fender under the overs if u cant tell since they are clearly not riveted in the picture...
Thanks for all the useful info and help guys. Ill get em to fit.

[Edgar]

Yup,

hes doing high speed Lefting.


hater

Nascar is cool :drama:

[chmercer]

lol, you do know that bn blister fenders will not fit with origin body kit, fucking AT ALL right?

[arkive43]

hahahahahahahha this thread is fun. it pisses me off that peeps that can afford the good parts dont know what the fawk to do with it...o well.
and lol at bomex. shits hawt son, at drift show off winner of the car show got a bomex kit wrd.....

[Ian]

lol, you do know that bn blister fenders will not fit with origin body kit, fucking AT ALL right?



nah bro it'll definitely work...once he buys them you'll see lol

[chmercer]

yeah i was just hating, it actually fits right up. he should go with trial aero and BN blister.

[arkive43]

and dont forget to get it molded for extra points at the hard parker meets.

[Pank]

I already have full origin stylish kit for this. When i say " low rider" i meant more of the wheels stickin out by 3-6 inches or like CleanS14 said, "a roller skate". The car is a shell im workin on which is why it has no aftermarket sups. parts or anything yet(i just started). Just taped the fender on to get an idea of what i was workin with. LB.Motoring... It looks like a normal fuckin uncut fender under the overs if u cant tell since they are clearly not riveted in the picture...
Thanks for all the useful info and help guys. Ill get em to fit.


wait, you are buying huge wheels and overfenders for a completely stock suspension'ed car?

jesus christ i love this thread

[3-240's-N-aMule]

hahahahahahahha this thread is fun. it pisses me off that peeps that can afford the good parts dont know what the fawk to do with it...o well.
and lol at bomex. shits hawt son, at drift show off winner of the car show got a bomex kit wrd.....

Then u need to get a life or go find a better job. I was lookin for full blister kit. Not just fenders. Sell origin kit, recoup some money. You understand the basic concept of that? Who said anything about puttin origin on with blister fenders? Shit is ugly son. But you're right, dont really know what imma do. Plan was just for full origin widebody and have wheels custom made sized to fit my car! But i came across the equip 01's that were already state side so i jumped on it. With this size i figured it changed my plans somewhat.

[3-240's-N-aMule]

wait, you are buying huge wheels and overfenders for a completely stock suspension'ed car?

jesus christ i love this thread

You're an idiot. Read few post up. Thanks for lovin thread. Stock suspension... Das cool...

[Pank]

You're an idiot. Read few post up. Thanks for lovin thread. Stock suspension... Das cool...

i read what you wrote:

"The car is a shell im workin on which is why it has no aftermarket sups. parts or anything yet(i just started)"


which means:

"i just got this car and want to be tyte, so instead of spending money on making the car handle, and therefor travel around a track faster, I'd rather spend my money on mondo wheels and overfenders, which will give me nothing except mad repppz when i go to pick up my GF from highschool"

IE, YOU BOUGHT FUCKING HUGE WHEELS AND DUMB OVERS FOR A STOCK SUSPENSIONED CAR, LIKE I SAID

[projectdrifter]

he does some Saturday night late model nascar type of racing. but he also drifts a s13 coupe silver with bronz rims ect ect wide body. i talk to him every so often. last i herd the 14.5 was on hold due to his busy scedual. i will call and see if i can get some more up to date pics.

[fliprayzin240sx]

Keep the fenders cuz and overs, get suspension next instead of wasting on BN blisters, I doubt the kits gonna be less than $3000. Use that money into your suspension. Lower it, mount some tires on the rims, cut the stock fenders, hack the fender well and have it welded shut. Then slap the fenders on and bow the shit out of it till it clears the wheel, then rivet it in place. Paint the sucka and DUN!!!

[chmercer]

Noone in america has ever seen a wheel that needs BN blister to fit

[MURPHY]

http://cgi.ebay.com/ebaymotors/JDM-PANASPORT-16-RIMS-240SX-DATSUN-510-240Z-280Z-AE86_W0QQitemZ140087131474QQihZ004QQcategoryZ43955 QQrdZ1QQcmdZViewItem


how damn wide is a bn blister? like millimeters

[fliprayzin240sx]

http://cgi.ebay.com/ebaymotors/JDM-PANASPORT-16-RIMS-240SX-DATSUN-510-240Z-280Z-AE86_W0QQitemZ140087131474QQihZ004QQcategoryZ43955 QQrdZ1QQcmdZViewItem


how damn wide is a bn blister? like millimeters

That bitch is like 4.5 inches out from my old 17x10 +12 w/ 20mm spacer setup. Whats sad is youll probably still need spacers to clear the front brakes...

[chmercer]

lol at 16s on a car with BN

[CleanS14]

They want me to do a Blister... I won't.

[projectdrifter]

i would run sommething that big witha set of bogart/weld light drag rims mt slicks. like a 11 inch rim or whatever the over fenders would fit... freeking amazing.. huge ass crome lip with a bronz centerhttp://i91.photobucket.com/albums/k285/s145gonewide/63fe_1_sbl.jpg
on a mr grey s14.. sex.

[Ian]

wow...


kill yourself...


please.

[chmercer]

ohhh babbyyyyy that humfry bogart rimssssssssssssssssss i just broke it off

[projectdrifter]

wow...


kill yourself...


please.
not all of us are drifters.

[OptionZero]

but some of us aren't idiots

[UfoZ8myCow]

lol at this thread... just sell your works and pick up some mad tite sportmaxes and call it a day.

[Ian]

hit up some vertex lang

[CKAMC]

This thread represents Zilvia on all levels :keke:

[EDacIouSX]

You're an idiot. Read few post up. Thanks for lovin thread. Stock suspension... Das cool...

Wow, no suspension? Man.... I'd call you a ricer but for some reason I feel you aren't anywhere near asian (that and im sick and tired of people not distinguishing rice from something else)... So, instead of calling that car riced out, i prefer to say it's beaned out.

Btw, here's the pics I took of your other car at saturday's East L.A. Civicoff

http://www.pickups.co.jp/parts/sport%20compact%20car-vol1/civic-lowrider-top.jpg

[3-240's-N-aMule]

i read what you wrote:

"The car is a shell im workin on which is why it has no aftermarket sups. parts or anything yet(i just started)"


which means:

"i just got this car and want to be tyte, so instead of spending money on making the car handle, and therefor travel around a track faster, I'd rather spend my money on mondo wheels and overfenders, which will give me nothing except mad repppz when i go to pick up my GF from highschool"

IE, YOU BOUGHT FUCKING HUGE WHEELS AND DUMB OVERS FOR A STOCK SUSPENSIONED CAR, LIKE I SAID
No sir. I still say ur an idiot or just narrow minded. Its means im starting from ground up. I got a very very good deal on the entire origin areo setup from enjuku which was a tempory deal so i jumped on it when i actually called to order some coils. You follow me? Same with the wheels. I jumped on them as i heard only several venders carry the 01 18's and only 1 or 2 in this size and offset?
I dont know why its so hard to understand me when i say "i just taped the overs on and threw the wheels on to see what i was working with". It wont stay even close to stock sups... If it makes u all happy, im purchasing MR coils, rucas and a few more things just for susp in like 5 minutes. Im still collecting parts for my car before i throw them on. Hopefully you guys or people who read like... the 1st post and then skipped the other 50 something and threw a stupid comment in finally understand wtf i mean and stop dissin cuz yall think imma be rolling on work 01 18's with widebody on STOCK sups. cuz thats extremely far from fact and i wouldnt even consider it. Car doesnt even have an engine in it...

[3-240's-N-aMule]

Wow, no suspension? Man.... I'd call you a ricer but for some reason I feel you aren't anywhere near asian (that and im sick and tired of people not distinguishing rice from something else)... So, instead of calling that car riced out, i prefer to say it's beaned out.

Btw, here's the pics I took of your other car at saturday's East L.A. Civicoff

http://www.pickups.co.jp/parts/sport%20compact%20car-vol1/civic-lowrider-top.jpg

That car is pimpin but im not mexican or asian.

[fliprayzin240sx]

Well all im saying personally is dont go crazy buying BNs just yet. Trust me, once you lower it and get the suspension setup in, the wheels will tuck into the fenders. Once you do that, make the fender fit over those wheels...nuff said. Im just trying to save you from trying to get something that you honestly wont need...

[CleanS14]

Why didn't he just listen to my mathematical assessment? Oh yah I don't know shit about this stuff...

Give him a break guys... I've been through 11 S14's now and it's all trial and error... let him learn on his own. Sounds like he's got some sort of an idea of what to do and I think his question was answered already of where to get BN.

I'm gonna unsubscribe now... thanks

[FaLKoN240]

ZILVIA GANG RAPE MENTALITY!!!

Alright...

[CKAMC]

yeah its time for some

:lockd:

[3-240's-N-aMule]

Why didn't he just listen to my mathematical assessment? Oh yah I don't know shit about this stuff...

Give him a break guys... I've been through 11 S14's now and it's all trial and error... let him learn on his own. Sounds like he's got some sort of an idea of what to do and I think his question was answered already of where to get BN.

I'm gonna unsubscribe now... thanks

Your mathematical assessment and pic is the main thing that deterred me from takin the BN route. Imma try to make the 20/50 fenders work before going a route i dont want to go. But yeah, this whole thing is pretty much new to me as far as body work and wheel fitment so yes im still learning which is why im takin your guy's advice. Seriously though, thanks a fuck load.

[EDacIouSX]

best thing to do is just go find other ppl w/ s14s and go off their fitment. see what their setup is for example i will be running 18x9+0 and 18x10+10 and that will require a pull in the rear. if you want 50mm over fender fitment basically just do some math and figure out what size you would need for the rear. (I'd guess around 18x12 -24 would fit exactly the same but that depends on how you put the fenders on)


oh btw, MR coilovers are great for budget. If you want something better go with stance, silk road or something in the mid 1500 range. Stay away from ksport though for sure...

[300hp owen]

wow mad haters on here this sites crazy.

you will not be able to fit them perfectly until you have coilovers and can dial in the camber you will run and lower the car enough for the suspension to tuck inwards a little with being lowered. right now your car is 4x4'ing with no motor in it and on stock shocks/springs, jeeeezus, man, wtf.

save up for some really nice coilovers and really, you wont even need adj. RUCAs, etc. if you dont lower it too much. good luck on the buildup, I love those wheels, they are super sick.

so what are you gonna run for tires? that also plays a huge role in what fits and what doesnt.

[MURPHY]

but some of us aren't idiots

which are you?

hah j/k stirring shit up. seriously tho :lockd:

[TRUENOCOUPE]

If you really want a full blister kit and know how much they are, I can get it to you on Friday at BUTTONWILLOW.

Don't even ask for the price, go look at BN Jap site and look at the price, Ill get it for the same with free shipping to BW raceway.

[Baby Zilla S14]

wow what kinda wide body kit is that on this yellow 240

[Full-Lock]

ummm what?
the one on page 1? that is bn sports blister. like the poster said

try this thread next time..
http://www.zilvia.net/f/showthread.php?t=122134

and yo this thread is like 5 months old

[ThatGuy]

:lockd: :lockd: