PDA

View Full Version : Parting out my '98 240sx KA-T


matt0941
07-13-2007, 12:40 PM
*CAR HAS BEEN SOLD*

Northern Chicago area. I will ship if needed but prefer local pickup. I am not posting prices but I am very reasonable, this is because I need to see if the part you want is undamaged because of the accident, so please make inquiries to me at [email protected]

My car before the accident:
http://img513.imageshack.us/img513/658/mattdriftshotsy0.jpg
http://img116.imageshack.us/img116/9369/matt8qv1.jpg


Last year I hit a patch of black ice and hit a wall, then got hit by a car. The damage is in the passenger side front corner and both sides of the rear. The interior and engine bay are intact. This is my car before I put it in the garage:
http://img521.imageshack.us/img521/2664/frontjl9.jpg
http://img184.imageshack.us/img184/8017/rearyw9.jpg


Here is a list of the specs and mods

1998 Nissan 240sx SE
272 HP, 295 TQ @ RW
34,000 miles

Handling:
KYB AGX Adjustable Shocks
Eibach Sportline Springs
300zx TT Wheels (16 X 7.5 front, 16 X 8.5 rear)
300zx Aluminum Front Brakes, stock rear
Hawk HPS Brake Pads
Brembo Drilled/Slotted
Earl’s Stainless Steel Brake Lines
Touge Factory Rear Subframe Spacers
OBX Strut Tower Bar

Interior:
Greddy 60mm Oil Pressure Gauge
Greddy 60mm Exhaust Temp Gauge
Sony CD Player
2 X 10” MTX Subwoofers (custom mounted in rear panels)

Drivetrain:
B&M Short Shifter
ACT Xtreme Clutch w/ Heavy Duty Pressure Plate
Tomei Traxx Advance 2-way LSD
Urethane Filled Tranny Mount

Engine:
Apex’i Duel Funnel Air Filter
300zx MAF Sensor
Garret T3/TO4E, 50 trim, .63 A/R, Stage III wheel
Greddy VSPL Front Mount Intercooler (Piping by Sound Performance)
IAP Equal Length Exhaust Manifold
Tial 38mm External Wastegate (Atmospherically Dumped)
Custom 3” Downpipe (Mandrel Bent – Sound Performance)
Touge Factory Straight Pipe
GP Sports Spec-D 3.125” Cat-Back
Genesis Compact Battery (13.5 lbs)
Urethane Filled Motor Mounts

Fuel Management:
Walbro 255 Lph Pump
E-manage Piggyback Unit
Profec E-01 Boost Controller and Tuner
JGY Customs Fuel Rail
MSD 50 lb Top Feed Injectors
300zx Fuel Filter

NiZMo1o1
07-13-2007, 12:54 PM
PM/ed also are you parting out the whole car ? I dont suppose you would part out the radiator support as well as the grill ?

drewc87
07-13-2007, 12:59 PM
is the 5 lug stuff still good?

kandyflip445
07-13-2007, 12:59 PM
PM me a price on the LSD shipped to 67846!

matt0941
07-13-2007, 01:05 PM
parting out the WHOLE thing

project_sr20det
07-13-2007, 01:42 PM
how much for the motor mounts??

Erling_Aa
07-13-2007, 01:53 PM
How much for the fuelpump, fuel filter and maf shipped to 85251? Sry about the car, looked nice!

va240ka
07-13-2007, 04:44 PM
how much for the manifold?

drftnby
07-13-2007, 04:48 PM
How much do u want for the whole front brake setup. let me know

SoloSilvia
07-13-2007, 05:29 PM
Hello, Was wandering How much on the Dash and Steering wheel, I dont need the airbags with them, just the shells! Shipped to 44663 in New Philadelphia, OH?

Also please throw me a price on your struts springs? LSD? Motor Mounts? Short shifter? and 300 front brake setup, (w/stock rears if the price is right). May even be interested in your stereo cd player and 6 1/2"s & 10's?

If you could please email me asap! [email protected]

Thanks,
Brian

NiZMo1o1
07-13-2007, 11:54 PM
Bro check your PMs please , Asap !

s14_rob
07-13-2007, 11:56 PM
interested in 300zx Aluminum Front Brakes

busyman_88
07-14-2007, 01:33 AM
ill take the whole radiator support/ grill/ slash full headlights with plugs and harness thanks. pm me with prices.

skynyrd2290
07-14-2007, 08:27 AM
is the down pipe a 5 bolt or 4 bolt?

burnsauto
07-14-2007, 08:41 AM
pm me for the price on the oil pressure gauge?

nOaAAa
07-14-2007, 09:08 AM
is everything mechanically working? does it still drive?

how much for a the whole car?

pm me your phone #...


Thanks and GL

juls213
07-14-2007, 10:47 AM
how much for the ka-t set up? Located in NJ
email me at [email protected]

turbo2nr
07-14-2007, 10:54 AM
i need some 5sp parts.

clutch hard lines, clutch pedal, slave/ mas. clyd/ tranny bolts..

how much shipped to 11432 , if you cant get the hard lines out ill take just the clutch pedal ass. and slave/mas. clyd.

thanks

matt0941
07-14-2007, 10:59 AM
sorry if i am slow responding to emails and PMs, trying to get to local pickup people first, then I will contact others - thank you. Also, if you are interested in a stock part please make an offer with your PM/email.

Jinya1004
07-14-2007, 11:44 AM
Bump for Matt's car.

babowc
07-14-2007, 11:52 AM
Garret T3/TO4E, 50 trim, .63 A/R, Stage III wheel


how much?

altalti
07-14-2007, 01:42 PM
if your willing to ship the turbo kit pm me a price to 23455.
thanks zach

SoloSilvia
07-14-2007, 11:35 PM
If I was able to drive and pick up, please email me prices on these parts! I need a vacation and could make the drive if the price is right!

Hello, Was wandering How much on the Dash and Steering wheel, I dont need the airbags with them, just the shells! Shipped to 44663 in New Philadelphia, OH?

Also please throw me a price on your struts springs? LSD? Motor Mounts? Short shifter? and 300 front brake setup, (w/stock rears if the price is right). May even be interested in your stereo cd player and 6 1/2"s & 10's?

If you could please email me asap! [email protected]

Thanks,
Brian

xdabsx
07-14-2007, 11:46 PM
this car is sold.i bought it today