bshotts
07-10-2007, 04:15 PM
What's happening?
I have been meaning to get these things up for sale for some time. I wanted to advert on here and needed to get some good pics up because I know how it is to buy something sight unseen.
1 Set (4) 370cc injectors - All injectors ran leak free and O-rings are still intact and have good flexibility. Used for roughly 5000 miles after recent rebuild, just upgraded to 550cc. $100
http://inlinethumb04.webshots.com/4483/2337984380101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2337984380101047631XOQjnl)
http://inlinethumb49.webshots.com/5936/2287964470101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2287964470101047631oJyUDz)
2 Unorthodox Racing Crank Pulley S13 SR20DET - Never used, new in box. Serp belt, A/C belt, and PS belt are not included because UR doesn't manufacture/include them with this pulley. I have heard good things especially for drifting as it slows the rotation of the water pump to avoid creation of air pockets in the cooling cicuit aka cavitation which can destroy the pump. $150
http://inlinethumb40.webshots.com/6887/2087021480101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2087021480101047631rOFocr)
http://inlinethumb41.webshots.com/4840/2035242190101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2035242190101047631GtjjIN)
Good close up of the timing degree marks (which comes in handy for setting timing):
http://inlinethumb21.webshots.com/4052/2607797750101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2607797750101047631QxOcTh)
3 S13 SR20DET MAFS with wiring harness - Again, used for roughly 5000 miles before upgrading to Z32 MAFS. $40
http://inlinethumb49.webshots.com/3568/2175371090101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2175371090101047631IiiuYI)
4 N60 MAFS with filter and filter adapter no wiring harness - Planned on using this MAFS before I decided to go with the Z32 N62 hence never purchased the wiring harness. Just cleaned up ready to be used up to 350-375 hp Grin. $75
http://inlinethumb48.webshots.com/4975/2445034170101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2445034170101047631ayGTmY)
Both mesh screens in place and undamaged, along with the internal sensor element:
http://inlinethumb54.webshots.com/6453/2858457170101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2858457170101047631GGqmHr)
SOLD to drfttsub!5 S13 SR20DET Side Mount Intercooler assembly - Original side mount intercooler configuration. OEM bypass valve, intercooler (with some polish work on the Al), compressor inlet tube, and piping with the exception of the hotpipe being an MSL "creation" that did serve its purpose. Worked fine for me until I decided to go front mount. I will include all necessary silicone couplers/clamps Also planned on using the 10" fan you see in the background as a dedicated intercooler fan which I have never seen but could only serve to help the heat transfer process; will include that as well as this would be a simple series (inline) wiring job into, say, your stock fan/aftermarket fan wiring circuit. $75 - SOLD to drftsub!
http://inlinethumb35.webshots.com/5730/2406932740101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2406932740101047631kxPFGV)
I will ship within the US, but I would need a days worth of time to get the total prices with shipping included before I would ship.
Thanks for looking and I will check the inbox once/twice daily so be patient please! For some reason they frown on the forum browsing during work
I have been meaning to get these things up for sale for some time. I wanted to advert on here and needed to get some good pics up because I know how it is to buy something sight unseen.
1 Set (4) 370cc injectors - All injectors ran leak free and O-rings are still intact and have good flexibility. Used for roughly 5000 miles after recent rebuild, just upgraded to 550cc. $100
http://inlinethumb04.webshots.com/4483/2337984380101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2337984380101047631XOQjnl)
http://inlinethumb49.webshots.com/5936/2287964470101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2287964470101047631oJyUDz)
2 Unorthodox Racing Crank Pulley S13 SR20DET - Never used, new in box. Serp belt, A/C belt, and PS belt are not included because UR doesn't manufacture/include them with this pulley. I have heard good things especially for drifting as it slows the rotation of the water pump to avoid creation of air pockets in the cooling cicuit aka cavitation which can destroy the pump. $150
http://inlinethumb40.webshots.com/6887/2087021480101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2087021480101047631rOFocr)
http://inlinethumb41.webshots.com/4840/2035242190101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2035242190101047631GtjjIN)
Good close up of the timing degree marks (which comes in handy for setting timing):
http://inlinethumb21.webshots.com/4052/2607797750101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2607797750101047631QxOcTh)
3 S13 SR20DET MAFS with wiring harness - Again, used for roughly 5000 miles before upgrading to Z32 MAFS. $40
http://inlinethumb49.webshots.com/3568/2175371090101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2175371090101047631IiiuYI)
4 N60 MAFS with filter and filter adapter no wiring harness - Planned on using this MAFS before I decided to go with the Z32 N62 hence never purchased the wiring harness. Just cleaned up ready to be used up to 350-375 hp Grin. $75
http://inlinethumb48.webshots.com/4975/2445034170101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2445034170101047631ayGTmY)
Both mesh screens in place and undamaged, along with the internal sensor element:
http://inlinethumb54.webshots.com/6453/2858457170101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2858457170101047631GGqmHr)
SOLD to drfttsub!5 S13 SR20DET Side Mount Intercooler assembly - Original side mount intercooler configuration. OEM bypass valve, intercooler (with some polish work on the Al), compressor inlet tube, and piping with the exception of the hotpipe being an MSL "creation" that did serve its purpose. Worked fine for me until I decided to go front mount. I will include all necessary silicone couplers/clamps Also planned on using the 10" fan you see in the background as a dedicated intercooler fan which I have never seen but could only serve to help the heat transfer process; will include that as well as this would be a simple series (inline) wiring job into, say, your stock fan/aftermarket fan wiring circuit. $75 - SOLD to drftsub!
http://inlinethumb35.webshots.com/5730/2406932740101047631S500x500Q85.jpg (http://rides.webshots.com/photo/2406932740101047631kxPFGV)
I will ship within the US, but I would need a days worth of time to get the total prices with shipping included before I would ship.
Thanks for looking and I will check the inbox once/twice daily so be patient please! For some reason they frown on the forum browsing during work