Dumb Dumb Question.. kouki side skirts on a zenki.. how did YOU mount them?

[Snoopy]

Im thinking 3m tape on the top, rivets on the bottom.

Also can I get some closeup pics of how they are mounted and exactly where (inch from the door seem, etc.)

[NiZMo1o1]

umm the front towards the splash guard are phillps screws ,

The end caps as well but has a clip.

Just double side tape the side of the sideskirts.. Or drill holes underneath the car to mount screws for more safety

[aznpoopy]

holes, self tapping screws and washers

plus a little 3m double sided

[Snoopy]

oh ok. Still dont like drilling into the exterior of the car for some reason :\

End caps go toward the back, right??

JDM Zenki rear valance peices with kouki sideskirts? you all like it? I do

[s14_mike]

i think the kouki sides flow better with a front lip and rear valences IMO, on a zenki that is

[alexkosheck]

Search, and you'll find a really good writeup on here and Nico on it.
I don't remember the link off the top of my head, but I followed those instructions and it worked perfectly.

Basically you need either the OEM clips or what I used was about 10 self-tapping screws (available at Home Depot or etc) and some double sided automotive tape (found at Kragen's)

[swayray]

all the above mentioned and self tapping screws at the bottom mount of the skirt...

[FinalDrive]

holes, self tapping screws and washers

plus a little 3m double sided

that worked for me