PDA

View Full Version : 350Z brakes on 240

916S14
07-03-2007, 12:16 PM
Hey guys i need some help. I have some 350z brakes that i can get for cheap, i was wondering if they fit on the 96 240, or do you need custom brackets and stuff like that? thanks.
DOOK
07-03-2007, 12:18 PM
are they the brembo calipers? If so, yes.
forum04pl
07-03-2007, 12:33 PM
yes they will fit

http://i79.photobucket.com/albums/j126/forum04pl/257598435_5662dfd215_o.jpg
916S14
07-03-2007, 12:41 PM
yes they are 13'' Brembo ungrades for the 350z, i'm getting for quite cheap and hopefully want to fit them on my car, thanks for your help, and anyone know where they sell custom brackets for stuff like this?
mr_240sx
07-03-2007, 01:13 PM
i might be wrong but iirc splparts was selling that kit a while back....
MavericStephenc
07-03-2007, 01:56 PM
as far as I know it should bolt right up with a little bore to the bracket on the caliper itself. there is a thread on here somewhere with complete details.
McRussellPants
07-03-2007, 02:08 PM
SPL sold the kit to adapt 350Z rotors with the 30mm Z32 brakes.


they don't sell it anymore though.
FinalDrive
07-03-2007, 04:55 PM
http://www.zilvia.net/f/showthread.php?p=1133074
916S14
07-03-2007, 10:04 PM
thanks guys for All your posts
UfoZ8myCow
07-03-2007, 11:48 PM
yes they will fit

http://i79.photobucket.com/albums/j126/forum04pl/257598435_5662dfd215_o.jpg

I want to bang your car. That thing is friggin amazing.
surge s14
07-04-2007, 01:10 AM
say you have a base s14 4 lug would the 350z set up bolt on for 5 lug?
wrapmeup2005
07-04-2007, 02:02 AM
Yes, the rotors are 5 lug but you can get them redrilled to 4 lug
surge s14
07-04-2007, 01:45 PM
no i meant S14 4lug convert to 350z 5lug
Cloud9
07-04-2007, 01:51 PM
no i meant S14 4lug convert to 350z 5lug

So you mean the hubs off the 350 on to the 240? right? I doubt they will work to be honest but not sure, plus it would be cheaper to just buy a 5 lug conversion, oem nissan = cash money.
projectRDM
07-04-2007, 02:16 PM
no i meant S14 4lug convert to 350z 5lug

What part of bolting on a caliper to the spindle leads you to think the hub will work too? That's great deductive reasoning. Z33 hubs do not work, period. Fucking idiot.

"I used a brake light bulb from a Mazda MX6 on my car, so obviously the transmission bolts right in too."
nissan_driver24
07-07-2007, 04:47 PM
What part of bolting on a caliper to the spindle leads you to think the hub will work too? That's great deductive reasoning. Z33 hubs do not work, period. Fucking idiot.

"I used a brake light bulb from a Mazda MX6 on my car, so obviously the transmission bolts right in too."


hahahaha wow i didin't know mx6 had the same tranny as a 240 lol :duh:
dorkjoey240
07-07-2007, 05:12 PM
hahahaha wow i didin't know mx6 had the same tranny as a 240 lol :duh:

this might sound stupid of me, but can s13 do 350z brakes swap?
articdragon192
07-07-2007, 05:15 PM
Same as S14. Just drill out the hole for the caliper bolts. oh, and convert to 5 lug or redrill rotors to 4 lug.
FRpilot
07-07-2007, 05:19 PM
this might sound stupid of me, but can s13 do 350z brakes swap?

if z32 calpiers bolt on s13 and s14... and s13 and s14 calipers are interchangable.. and q45 calipers will bolt onto s13 and s14... and s13 silvia/maxima/altima caliper and brake parts bolt on s13 and s14.. and people say 350z calipers will bolt on...

then...

you figure it out.
opponheimer
07-07-2007, 05:33 PM
What part of bolting on a caliper to the spindle leads you to think the hub will work too? That's great deductive reasoning. Z33 hubs do not work, period. Fucking idiot.

"I used a brake light bulb from a Mazda MX6 on my car, so obviously the transmission bolts right in too."

hahaha

messagelength
bamaboy
07-09-2007, 11:04 AM
I want to bang your car. That thing is friggin amazing.

you know, I think we would all like to hump his car