safc-2 after enthalpy tune

[Goinsleeper]

Alright so i got my ecu tuned for the z32 maf and when i plugged it back up i was really rich. i realized i hadnt changed ne thing in my safc-2. i left my manual back at my apartment which is roughly 5 hours away. all i need to do is keep it on hot-wire and run the in and out as the same number right?

[drift_ricer]

I think 2in 6out

[Goinsleeper]

the ecu is programmed for 300z maf now so no it no longer needs to be 2 in 6 out. just spoke to scott and it needs to be 2 in 2 out or whatever as long as they are the same.
turns out i have a bad tune or bad chip but everything is getting taken care of.

[kuramaya]

Yeah if the Computer is tuned for the Z32, then you need not adjust the In/Out. However, I would zero out your Previous settings and start over.

edit - You have (2) setting patterns you can use with the SAFC. Save your old one, then use the second one and retune.
Late
Daryl