S14 ECU code 105 - EGR and canister control valve (Solenoid)??

[Indolent]

95 S14 ka24de obdI
This is the only code i'm throwing
Found a thread saying it's on the back of the head, but that was for the s13 obdI, opposed to s14 which has nothing on the back of the head, where on the s14 obdI is this 'canister control valve' and what's it look like? pics would be nice

anyone with any experience fix this? is it just the valve or is it something else causing the valve to throw the code?
-I replaced ALL vacuum hoses associated with the EGR so I can guarantee i have no leaks/cracks

What should I replace?

[SR240DET]

i ended up using resistor for 105 code and egr temp code. When i get back from work ill post the resistor i ended up using.

i also have a odb1 s14, so it should work.

[Indolent]

yeah i remember doing the resistor for my code 32/33/34 forgot which one it was, but it worked fine, you're talking about putting the resistor in between the egr temp sensor in between intake runners 2/3 right?

[95Blue240sx]

are you sure its not the erg solenoid? Its under the FRP, would be easier if the engine was out the car, or if you take off the upper intake manifold.

The resistor these guys are talking about is 100k ohm 1/4 watt resistor