Project Kics spacer stud question!

[babowc]

Hey guys..
I recently had my car stolen..
anyways, I recovered it but the theif fucked up one of my studs on the spacers, so i had to drill the sucker out.

Now... I thought there was a spare lug stud in the bag i had.. but unfortunately I didnt and when i removed the stud, i chucked it down the hill before finding out the pitch, knurl dia. and the specs of the stud.

Does anyone know what the specs of the studs are? and where i can buy a new one?
Please let me know!

[mestizo]

I'm not sure what the thread size is on the spacers but I would assume they are stock nissan sizes. Stock 240 lug studs are 12x1.25 and if they are standard length you can get them at most auto parts stores or for sure you can get them at the Nissan dealership.

[babowc]

nopenope..
i tried the stock stud sizes and it didnt fit :(

its a bit thicker, but the thread sizes are the same.
so i guess 12x1.25.. but i still need to know the actual diameter/knurl of the stud. :(

anyone?

[mestizo]

O ok i understand what you mean now. Yea your best bet would prolly be to contact the manufacturer or see if anyone on the board is selling the same thing you have and see if they wouldnt mind checking it for you. The only other solution I can say is try to remove another one without damaging it and take it with u to get another one.

[babowc]

anyone?> bbbbbbbbbbbb

[babowc]

cmon..
i know you guys all run spacers..

[rican_nick]

easiest thing to do is take one of the studs.. go to ur neighborhood friendly auto parts store.. tell them u need to find this and after 10 minutes of them not finding it in there 30 drawers of studs they have.. you ask.. do you mind if i check.

and then u sit back there until u find it.


I had 12x1.5 Kics spacers that i got cheap. Went to Advanced and my buddy let me behind the counter and i just matched up a 12x1.25 stud with the knurls on the kics spacer. I wrote the part number down.. but this was years ago.