ka24e vs. ka24de turbo header

[itsme]

ok, i cant find anywhere a turbo header for a ka24e, but have found a ton for the ka24de, are the header flanges the same, is the de header a direct bolt on to the ka24e?

[cdlong]

nope. if you wanted to swap out the flange it would be close, but i think the ports are different too.

there are KAe manifolds, keep searching. try KA-t.org.

[itsme]

Thank You Very Much!

[infinitexsound]

port spacing is very diffrent.... jgs makes a log mani..

[cdlong]

yep, my bad, the DE is evenly spaced and the E has 1/2 and 3/4 paired. but you do have some choices, http://www.ka-t.org/forums/viewtopic.php?t=1756&highlight=

[ns060]

you can go to jgstools like I did and get a turbo mani kit for 200 bucks shipped to your door, you tell them what motor you have what turbo and what size pipes you want and they send, then you can weld it yourself or paya welder to do it!
Also you can get one from Gladman performance
there one other place but i know its a sidemount setup and runs about 600$