best place for wire harnesses?

[devonkyle77]

so after seeing some swaps that have the wire harnesses looking like a small child did them, i thought it raised some concern. where is the BEST place for the cleanest looking harness?
thanks!

[fliprayzin240sx]

Phase2 did mine, got no complaints.

[Luvs2slide]

Are you talking about where to wire it? Or to get the wiring done?

[mwilloughby87]

wiringspecialties.com did mine and it looked great

[kensreliableb18b]

phase2 for sure. konishi-san is the best!

[jrmiller84]

If you mean where to run the harness, I ran mine through the passenger side wheel well to hide a bulk of the wires.

If you mean where to get your wiring done, it's not hard to do if you have a basic knowledge of soldering (http://www.kingbass.com/soldering101.html). I used this writeup (http://www.frsport.com/SR20DET_Swap_Engine_Harness_Wiring_Guide_SR_SR20_t _26.html)(by far the best) and cross-checked it with Heavy Throttles (http://srownersclub.com/faq/index.asp#harness) and it worked perfectly the first time.

Use wire shrink wrap to cover the wires and it'll look and work good as new. Not to mention save you over $200.

[Slidin240Wayz]

You can send it my way.

My friend repins the plug, heat shrink and solders any connections, first time start up; 250 plus shipping.

Carlos