suspention settings

[Skinny]

I just imported a JDM 1992 Silvia,
Later this week, i am ordering some Federals
and i need to get my car aligned for the new tires

I was told that i need the settings to have it set as when i take the car in.
so does anyone have any settings?

I believe its caster, toe, camber, and roll center...but not totally to sure.

thanks in advance!

[jspaeth]

i HIGHLY doubt that any shop is gonna adjust roll center......

you can get alignment specs from the FSM....just search for the FSM

[Skinny]

i had no idea what they would adjust
those are SOME of the settings i know...

EDIT: what is FSM
I am really new

[bigOdom1]

factory service manual. also use the search and try lots of different key words until you fiind what you want to know. i promise it is there if you search first and check the sticky threads

[Skinny]

sounds good, ill begin my search!

[aznpoopy]

its suspension (with an s) ;)

stock settings are:
FRONT
camber 0 to -1.3
toe 1.5mm - 3.5mm IN
caster 6 to 7.3

REAR
camber -1.4 to -.4
toe 0mm - 5mm IN