FS. 18x10/11 +18 5x114.3 work meister s1 3pc.

[khmerguy618]

I got a set of track wheels in 18's so the works and the rest of the wheels have to go to make room for a motor swap.

I just got these last week.

GUnmetal Work meisters 3pc s1's.
18x10 +18 (r disk)
18x11 +18 (0 disk)

Shit i forgot 5x114.3 in the title, could one of the mods pretty please put it in there for me.? thanks.

There is a scuff on the passenger side front wheel. knicked a curb. front of the lip has a small 2inch scratch top of the lip (along the bead) has a scratch about 4inches.


The inside of the rear wheels have some rash becauce they were rubbing my coilovers (s14 w/ hks coilovers). It needs at min. a 3mm spacer to clear, a 5mm is nice and if u have extended studs a 10mm is perfect.

The fronts need spacers to clear coilovers (Plenty of brake clearance though). i ran a 20mm, but imho a 10 or 15mm would look best. I didn't have any rubbing on a s14.

some pics i'll take better ones.
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2903.jpg
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2897.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/CIMG2987.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/CIMG2907.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/CIMG2908.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/CIMG2894.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/CIMG2899.jpg
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2980.jpg
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2960.jpg


Right now they have some:

225/40/18 dunlop fm901's (front)
235/40/18 federal ss595 (rear)

both sets of tires have about 5-600miles on them.

the can go w/ the the wheels or with out. If with out i'll just keep them for track tires.

shipping is possible on the wheels but its gonna cost 200 (through UPS ground in the continental US) and it won't be with tires.

2400 w/o tires, 2700 w/ tires obo.

located in the bay area (near greatmall).

------EDIT------------ PICS OF RASH------------------
front-one scuff
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/rash/rash3.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/rash/rash2.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/rash/rash1.jpg

rear-coilover rub on inside:
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/rash/coiloverrub3.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/rash/coiloverrub2.jpg
http://i20.photobucket.com/albums/b216/sereitun/Work%20Meister%20s1%203pc/rash/coiloverrub1.jpg

it would cost about 120bucks from wheel techniques or you can do it urself w/ some high grit sandpaper and all that. I would have done or sent it out but i'm strapped for time w/ 2jobs and school coming up.

IT really doesn't look that bad i'm just super anal about my wheels and when it comes to this car.

[apex]

bump for sum baller a$$ wheels
but lemme ask u what does this mean (r disk) (0 disk)
never seen anybody explain it

[khmerguy618]

bump for sum baller a$$ wheels
but lemme ask u what does this mean (r disk) (0 disk)
never seen anybody explain it

R disk = racing disk (best brake clearance least lip)
A disk = mid disk (compromise between brake clearance and lip)
O disk = shit i don't know but its got hella lip and crappy brake clearance.

If you want the exact thing just check out work jp/us website. But that's basically what it means.

The black stuff on the rear wheels aren't scuffs it might be tire residue and the spray they used to mount the tires.

[topsecretgold]

suuuper sic wheels....wish i could afford them

[300hp owen]

super sickness, I wondered what a 10" wheel would look like on the front of a kouki. you fit those 225's under a stock fender just rolled a little?
thanks.
those are amazing wheels, GLWS!

[Ikant]

god damn!!!!!!

[luckysr]

clean ass wheels pm'd you

[blackcoupe]

serei you sell to many baller wheels. keep em damnit. this is aarons roomate btw.

[khoadogg]

trade trade trade!?

[khmerguy618]

super sickness, I wondered what a 10" wheel would look like on the front of a kouki. you fit those 225's under a stock fender just rolled a little?
thanks.
those are amazing wheels, GLWS!

yeah i could roll the fenders approx. another 4 or 5mm. I put my 9.5's in the front and i could dunk it all the way and the rim would have plenty of clearance.

10" wheel w/ a spacer.

----------
Miles! waddup man, wish i could but i'm tryin to liquidate everything thats not needed anymore so i can get that motor swap going.

----------
luckysr: pm replied bro

----------
khoa: hit me up maybe we can work something out but i already have too many wheels as it is. U got the celly give me a ring.

[nismo-joe]

so you're saying i don't need spacers to run these on my s14? where in ca are you located? very interested in these, i PM'd you but havn't got a reply yet....:eek3:

[khmerguy618]

PMs replied.

[pbcstylez]

damn you serei, if i knew about these before sending my money off...

[pinkpandaslide]

can you do $2200 shipped to orlando fl 32833? if so, I'll buy them. thanks and let me know.

[nismo-joe]

i can do 2200 picked up at the all star bash either saturday or sunday. let me know, i really didn't get a for sure answere from you through the pm...

[LB.Motoring]

^ vouch for Joe,


damn, fluck Balla!

[khmerguy618]

Joe u got a response get back to me asap bro.

[khmerguy618]

Wheels pending to joe.

[khmerguy618]

Wheels back up, i'll be in socal this weekend for AX so if ur local or want to drive out to LBC hit me up.

new price 2600 with tires obo.

[the bee guy]

Damn nice ass wheels. You wouldnt wanna trade for some Work Equip type V's would you? Possibly with some cash on top on my part.

http://a775.ac-images.myspacecdn.com/images01/11/l_3d7e514c1a14ba08954920c37ab596c6.jpg

http://a881.ac-images.myspacecdn.com/images01/25/l_31ea66665faeac521634364d62c1c350.jpg

I doubt it but its worth a shot :boink:

[khmerguy618]

Damn nice ass wheels. You wouldnt wanna trade for some Work Equip type V's would you? Possibly with some cash on top on my part.

http://a775.ac-images.myspacecdn.com/images01/11/l_3d7e514c1a14ba08954920c37ab596c6.jpg

http://a881.ac-images.myspacecdn.com/images01/25/l_31ea66665faeac521634364d62c1c350.jpg

I doubt it but its worth a shot :boink:

Damn, those wheels are nice and people would stop saying "is that jay's car" when ever i drive by but i'm saving for a motor so i can hit up a track day in august.

If u want to PM me w/ the details of the wheel setup i'll consider it though.

[drftwerks]

bump this nigga needs to buy my cage

[pbcstylez]

bump for his inability to pull fenders, now rolling okay, anyways bump for the man

[the240sxer95]

i might be interested!

[khmerguy618]

bump for his inability to pull fenders, now rolling okay, anyways bump for the man

lol, sorry sir! we'll get crackin on the pulling. HIt me up on ur day off i'll go cop another roller and we'll pull the shit out of fenders at teh junkyard.

all pm's replied.

[charmersfh]

If only these will clear my S13 coupe..I would so be up for it.. 30mm wide rears + 30 mm wide fronts..lmk..cash in hand

[khmerguy618]

If only these will clear my S13 coupe..I would so be up for it.. 30mm wide rears + 30 mm wide fronts..lmk..cash in hand

depending on the coilovers you have the front will need a 15-20mm spacer (used a 20 and had it 10 -2 in the front on stock fenders and the tires cleared). The rears i'd suggest a 5mm plate spacer to clear the coilover or something like a 15 to make it flush, or just run less camber.

I had them on a 14 all stock body w/a roll in front and pull in the rear. The rears i had them just barely scraping the coilover and that was at around 4deg. of camber. I took them off and had my car aligned but i have other wheels to use now so i just cleaned them up and put them aside.

I can ship em by the end of the week if you're really interested.

[charmersfh]

I have silkroads coils...

pm me your number... lets talk..seriously. cash in hand


depending on the coilovers you have the front will need a 15-20mm spacer (used a 20 and had it 10 -2 in the front on stock fenders and the tires cleared). The rears i'd suggest a 5mm plate spacer to clear the coilover or something like a 15 to make it flush, or just run less camber.

I had them on a 14 all stock body w/a roll in front and pull in the rear. The rears i had them just barely scraping the coilover and that was at around 4deg. of camber. I took them off and had my car aligned but i have other wheels to use now so i just cleaned them up and put them aside.

I can ship em by the end of the week if you're really interested.

[khmerguy618]

I have silkroads coils...

pm me your number... lets talk..seriously. cash in hand

you got a pm bro

[khmerguy618]

No loitering, rear tires have come off. fronts are coming off next week when i get some time. If you want em hit me w/ serious offers. Don't waste my time. I've got some bills to take care of.

[TheSquidd]

I want. I can't afford :(

[khmerguy618]

Shit, maybe I need to sell my te's and keep these wheels then.

[Adam496]

Can i get detailed shots of the rash on each wheel?

[khmerguy618]

The shots of the rash are on the first page. THe rash on the outer lip is on the front pass side wheel (as it was setup on my car) and the inside coilover rub is on the 2-3 other pics.

Like I said you can hardly tell in person (everyone who's seen them asks, "where's the rash at" and after i point it out its like "thats it?!!?", it's just i'm super anal about my wheels.

I don't plan on using these anymore since the car is going to get more track time and I'd hate to bust them up.

[MonkeyWrench]

Very nice.

Fitment on an S13 with coilovers and 3" bolt-on flares?

[khmerguy618]

Very nice.

Fitment on an S13 with coilovers and 3" bolt-on flares?

It should fit fine. Fronts will need spacers to clear coils, rears will need a 5mm to be 100%sure to clear coils. or else run 0camber.

u can run a 10 0 on a s13 w/ stock pull. u figure a 3" flare = about 75mm. so clearance shouldn't be an issue in the rear since its an 0 disk wheel. but u might want to check the wheel fitment thread to see what similar setups have done.

[pbcstylez]

i cant believe why these are so hard to resell?

[khmerguy618]

i cant believe why these are so hard to resell?

I have no idea either.

Last chance for a long time for socal guys. I'm going to the Just drift event this weekend so if you want them w/o paying for shipping let me know.

u guys have....4.5hours left to let me know.

I will only meet you WSR since i'm heading down today and leaving after the event.

[khmerguy618]

SOLD please and thank you. '

THey should look doap on the 50z they they're goin on.