FS: GT32, KA cams, flywheels, ES100s, more

[turtl631]

Parts available, scroll down for pics/descriptions:
-10AN summit swivel end
S14 15/16" master cylinder
Z32 NA fuel pump
2.5"-3" silicone reducers w/ t bolts, 135* 3" silicone elbow w/ t bolts
235/40/17 Yokohama ES100s
ATP 5 bolt turbo flange
JGS oil feed and return lines for T3 on KA24DE


Please email me at [email protected] if you have any questions or want to buy something. I check that far more often than this forum. If you just post here, it could be some time before I see it. I prefer local pickup in Chicago (I'm on the SW side by Midway airport), but will ship at the buyer's expense. Thanks for looking!


Summit -10AN swivel hose end, the non-scuffed one is available: $4
http://i11.photobucket.com/albums/a160/turtl631/CIMG0995.jpg


Z32 NA fuel pump $10

135* 3" coupler w/ t bolts ($20 shipped)
http://i11.photobucket.com/albums/a160/turtl631/CIMG1045.jpg

3"->2.5" reducers w/ t bolts ($15 shipped each)
http://i11.photobucket.com/albums/a160/turtl631/CIMG1046.jpg

JGS oil feed and return lines for KA24DE/T3 with T3 feed flange (extra) ($60)
http://i11.photobucket.com/albums/a160/turtl631/CIMG1047.jpg


KA24 232 cam: not sure if its intake or exhaust, can't recall, I'll check if someone is interested- $15

KA24 240 cam: S13 intake cam, with gear and bolt, $25

Ford 5 bolt style exhaust flange with countersink for 2.5" pipe, made by ATP I believe. Has some weld left on it, but should be easy to reuse. $12 shipped.
http://i11.photobucket.com/albums/a160/turtl631/CIMG1112.jpg

S14 ABS style master cylinder- 15/16", has only 2 ports so you need to run it on a ABS car or use a Y splitter for the front lines, $20
http://i11.photobucket.com/albums/a160/turtl631/CIMG1116.jpg

235/40/17 Yokohama ES100s- All 4 are pretty worn out, 2 of them are nearly corded on the inside, the other 2 have about 5-6/32s of tread on the outside and are just barely slick on the inside. They're the product of many miles with a bad alignment, might be decent for drifting if you reversed them and ran the treaded part on the inside. $50 for all 4, prefer local pickup in Chicago

http://i11.photobucket.com/albums/a160/turtl631/CIMG1122.jpg

http://i11.photobucket.com/albums/a160/turtl631/CIMG1121.jpg

http://i11.photobucket.com/albums/a160/turtl631/CIMG1120.jpg

[turtl631]

Resurfaced flywheel is sold, everything else still available. Make offers on this stuff, I'm sick of sitting on a bunch of 240 parts I don't need.

[turtl631]

Also have a set of Stanza fans, just like Altima fans but with a slightly different shroud, doesn't matter since you cut it anyways. $50 plus shipping!

NRG slim quick release: Black, tried it on my car but didn't like the distance it placed the wheel from me with my hub/seat setup. $95 shipped, these go for $115 shipped on ebay, and mine has just been test fitted. Plus I ship fast unlike ebay bastards.

[turtl631]

I edited my post, all prices have been dropped!

I just want to move a lot of this stuff, so make me offers. It does me no good sitting in my garage.

[Bad40r7]

What MM size is the 32 compressor side?

[turtl631]

Sorry, GT32 is sold. NRG slim QR, Stanza fans, JGS oil lines, etc. all still available!

[turtl631]

Updated thread again b/c items sold. Make me an offer if you don't like my prices- I really want to get rid of this stuff!

[jkeisser]

Still got those cams?

[turtl631]

Yes sir, sure do. Email me if you want to buy them and we can set it up- [email protected]