hey, i finally got my LSD in today

[boosteds14]

well the freight company just dropped my LSD off. Its a JDM Lsd off a silvia s14. hope it fits <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'> . anyway, after inspecting it and taking a hard look at it. i was wondering, where do i put the oil in? i am looking for it but just cant seem to see it. i must be blind.

also, is there any special thinks i should look at to inspect before i install?

i will have pics posted shortly.

[sil80]

LSD install (http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=167702&Forum=UBB9&Words=LSD&Match=Entire%20Phrase&Searchpage=6&Limit=25&Old=3months&Main=167676&Search=true#Post167702)

VLSD on the left has a incoming connector to the right of the yellow one.. is that not it?
http://a2.cpimg.com/image/CC/48/10795212-256c-028001E0-.jpg

[boosteds14]

yep the one on the left is the one. i must be as blind as a bat because i didnot see that pipe until i looked again.

thanks

[uiuc240]

isn't that a breather? &nbsp;i think you should just fill it through the drain plug. &nbsp;just tip it on end, and pour the recommended amount of fluid in.

Eric

[boosteds14]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">isn't that a breather? &nbsp;i think you should just fill it through the drain plug. &nbsp;just tip it on end, and pour the recommended amount of fluid in.</td></tr></table><span id='postcolor'>

ya that is what i think, but i could be wrong. after looking at it for the third time i think that is a breather

now what fluid do i use for this LSD. it is not a VLSD.(from what i was told when i bought this.)

[sykikchimp]

If it's a Stock Silvia LSD then it has to be a VLSD. &nbsp;On the 240 Diff isn't the fill plug on the left side? &nbsp;Maybe it's in the same place as the drain plug?

Also are you gonna have to swap Diff covers? &nbsp;b/c if the one you bought looks like the one on the left it won't bolt up will it?

[boosteds14]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Also are you gonna have to swap Diff covers? &nbsp;b/c if the one you bought looks like the one on the left it won't bolt up will it?</td></tr></table><span id='postcolor'>

its an s14 this is going into. bolts right up.

[boosteds14]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">If it's a Stock Silvia LSD then it has to be a VLSD. &nbsp;On the 240 Diff isn't the fill plug on the left side? &nbsp;Maybe it's in the same place as the drain plug?
</td></tr></table><span id='postcolor'>


ok i went to look at it for the fourth time. the drain plug and the fill plug are in the same position as the stock one i got on my car now.

but is it a vlsd.?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'> how do i check this. &nbsp;do i need to pull the cover off? and again. WHAT OIL DO I USE??

[SaintlyCharBoy]

if it is off of an S14, it is a VLSD

iirc only the s15 used anything else (helical i believe)

you could just talk to the friendly local nissan dealer as the diff oil should be the same

Camppain? &nbsp;any clues?

[West]

http://www.zilvia.net/installs/installs.asp

There is a LSD Swap writeup in there.