JIC Magic FLT-A2 Coilovers S13/S14 Japan Valving 8kg / 6kg - Proven G'z Suspension!

[A Spec Products]

http://www.aspecproducts.com/forums/zilvia/jic/JIC_00.jpg

Recently at the Redline Time Attack held on April 29, 2007 @ Buttonwillow Raceway, JIC USA's / Hankook Tire's S15 Silvia broke the previous lap record held by Tarzan Yamada in the Cyber Evo.

The S15 was using JIC FLT-A2 Coilovers.

These days, it's harder to distinguish and differentiate the good from the bad, especially in the suspension market.

Just like your mom told you, its wrong to judge a book by its cover.

JIC has always been well known for its FLT-A2 series coilovers, and the car shown above is a great example of PROVEN PERFORMANCE.

http://www.aspecproducts.com/forums/zilvia/jic/youtube.jpg (http://www.youtube.com/watch?v=Kjieeb1gGso)

Click here for the video: http://www.youtube.com/watch?v=Kjieeb1gGso

While this might not seem like an important feat, this is a VERY FAST car, and its success could not have been reached without one of the most important parts of the car: the suspension (FLT-A2's obviously).

So although most of you guys won't be trying to break lap records, for those who demand high quality PERFORMANCE suspension, these are the way to go.

http://www.aspecproducts.com/forums/zilvia/jic/FLTA2_S13_00.jpg

The FLT-A2 for the S13 and S14 come with 15 way adjustability, and are monotube inverted setup.

Monotube inverted setups are more durable than twin tube setups, in the sense that it dissipates heat a lot faster, and builds up heat slower than a twin tube.

http://www.aspecproducts.com/forums/zilvia/jic/FLTA2_S14_00.jpg

Cold wound springs that will never fatigue, and beefy STAMPED brackets, not like the ebay specials.

This is what coilovers USED to look like, instead of the low cost low quality reproductions flooding the market.

I use these personally on my car, and have used them for daily and track use with no complaints. I have the Japan valving (which is more aggressive than US version), and 8/6 spring rates, and haven't seen any reason to change since.

I took them off recently and even after daily drive and tracking it, the shocks still work properly and return faster and slower, with no leaks.

Get at me for price, good in stock ready to ship!

List price is $2070, but don't get scared, I'm selling them for a VERY good price since I know some of you need good suspension but are working on a limited budget.

(1) S13 in stock
(1) S14 in stock

$ Contact me for price

[GSXRJJordan]

Great coilovers... and knowing Logan, a great price too ~

[JesusFreakDrifter]

i'll be the first to (feign?) interest how much shipped to 33319

[ALEXTHESUS*PECT]

http://www.aspecproducts.com/forums/zilvia/jic/JIC_00.jpg

panisa said she doesn't want to be in your ads! i asked her. homegirl from highschool! she said she is "too baller for your little company!"

[DOOK]

i'll take a quote for S13 shipped out east

[Full-Lock]

A+ for these coilovers, i have them w/ the JDM valving and they rock

A+ for aspec too, ive bought a lot from him and he does a great job

BUY THESE

['90RPS13]

Jon from JIC USA is the shit.

+1 for Jon, Jic, and Logan.

[Slidin240Wayz]

Price please...

[drftlv]

s13 to 28314

[yokotas13]

these things are fantastic guys

I have htem on my Cedric, and SOooooooo beautiful

[Howard92884]

Price for S13 shipped to 44870?

[DOOK]

just got my shipped quote, damn good price. Now it's time its time to scrape up the funds :D

[A Spec Products]

panisa said she doesn't want to be in your ads! i asked her. homegirl from highschool! she said she is "too baller for your little company!"

um yeah, import model doesn't want MORE free coverage. get real.

http://www.aspecproducts.com/forums/zilvia/rsr/sportsi_00.jpg

If anyone is working on a more affordable budget, or a less aggressive coilover setup (for more street driving), I'd suggest the RS-R Sports*i coilovers

I have these good in stock, also on SPECIAL price

(1) S13 set in stock
(1) S14 set in stock

The only requirement for the price is you write a review on the RS-R's

[MrChow]

Can I get the prices for both JIC and RS-R for a S14?

I remember you post about the RS-R coilovers. They look really nice.

[crazyikimasho]

http://www.rogansan.com/paint/dd36.jpg

Recently at Drift Day 36 held on May 19, 2007 @ El Toro , ASpec Logan's S13 broke a fuel pump.

The S13 was using JIC FLT-A2 Coilovers.

[A Spec Products]

Recently at Drift Day 36 held on May 19, 2007 @ El Toro , ASpec Logan's S13 broke a fuel pump.

The S13 was using JIC FLT-A2 Coilovers.

You see!

My coilovers were SO dope it broke my fuel pump!

It eats babies too!

[DOOK]

HAHAHAHAHA, baby eating coilovers MUST be purchased.

[rps13drift]

jic flta-2's ftw! I have had these coilovers now for 2 years and they still kick ass! Hey logan do you carry jic replacement springs? Im looking to get a stiffer set in a few weeks!
-mike-

[A Spec Products]

jic flta-2's ftw! I have had these coilovers now for 2 years and they still kick ass! Hey logan do you carry jic replacement springs? Im looking to get a stiffer set in a few weeks!
-mike-

Yes, I can get replacement springs

But I would recommend getting Swift Springs if you want coilover replacement springs

JIC springs are cold wound and linear like the Swifts, but the Swift has more ability for customization, with spring rates, spring length, etc

Pretty much if you're going to spend the money for replacement springs might as well get some Swifts

[Irukandji]

I loved my flt-a2's, but sold them for something different.
good shit either way

[CA18_S13]

Price for S13 shipped to 23464.

[Wei240]

yeah, this is what i have, except mine doesn't come with dust boots like the pics above, 8/6,
super great suspension yay

[burgy240]

price for the RSR s14 shipped to 33607 FL? thanks

[meth]

Price for the JIC and RS-R for an '89 240 to 33186 please.

[MBP240sx]

price for s13 shipped to 98366?

[yokotas13]

Yes, I can get replacement springs

But I would recommend getting Swift Springs if you want coilover replacement springs

JIC springs are cold wound and linear like the Swifts, but the Swift has more ability for customization, with spring rates, spring length, etc

Pretty much if you're going to spend the money for replacement springs might as well get some Swifts

Sprint FTMFW
I always get sprint when i get my coilovers
Normally in the front becuase the stock springs with coilovers are normally too long to go as low as id like to

Well priced, and great quality, and you can get any ID, Length and springrate combo you want just about!!!

+60 for logan!

[kaotic]

flt-a2s are a great coilover for DD and mild track use.. imo.. ive had the japanese spec flt-a2s for almost 3 years.. and they are still as strong as ever

[scottie]

Logan,

Do you carry replacement dampers? Thats a big thing for people who track their car often and if something were to happen, can you get replacement dampers or do you have to send it in and wait weeks to replace it?


Scott

[punch]

I need a replacment shock.

[5t341tH]

can i get shipped price on the jic and rsr for s13
to 92647

[omen2853]

ive had mine for 4-5 years. they finally broke. but they were awesome while they werent broke. and they go pretty low too.

and logans cool. so by association his customers are too.

[A Spec Products]

Do you carry replacement dampers? Thats a big thing for people who track their car often and if something were to happen, can you get replacement dampers or do you have to send it in and wait weeks to replace it?


We do not stock the replacement dampers, but as authorized JIC dealers we can have the process done for you (rebuild/overhaul)

I believe we can sell the dampers by themselves unassembled but we typically recommend sending your coilovers in to get it done by JIC USA.

As far as rebuild/overhaul goes, by the response by owners on this post it can safely be said that you will not need to replace or service the coilover for quite a long period of time, if at all.

I need a replacment shock.

You can contact the dealer you purchased the suspension from originally, or I could help you get the replacement taken care of.

can i get shipped price on the jic and rsr for s13
to 92647

We are also located in Socal (off 60/605 freeway), so local pickup would be more cost effective.

[THE KOUKI MONSTER]

can i get a price for the rs*r s14 shipped to florida 33024

[articdragon192]

Can you PM me price for Z32 app please?

[A Spec Products]

Can you PM me price for Z32 app please?

If anyone is curious, eta on the Z32 forks (to convert) is $80 each (additional).

ETA if someone wanted them would be on the August container.

[driftsilvias13]

PMed you about the JICs

[catchmydrifts14]

pm price for s14 plz...........

[A Spec Products]

Check your PM's

Need these gone, you show me the money and I'll make it happen

[Vinny]

S14 coilovers shipped to 08054 please

[A Spec Products]

S14 coilovers shipped to 08054 please

Check your PM

Let's do it fellas

I sell dope parts not windows

[A Spec Products]

http://www.aspecproducts.com/forums/zilvia/jic/kjseattle.jpg

http://www.aspecproducts.com/forums/zilvia/jic/nopiKJ.jpg

Proven performance

Kenji Yamanaka throws down rocking FLT-A2s

You don't see knockoff coilover sponsored drivers taking podium in Formula D, Nopi, and such, do you?

Stupid summer clearance price, get at me!

(1) S13 FLT-A2 in stock ready to go
(1) S14 FLT-A2 in stock ready to go

[crescendo]

Go ahead and PM me with your gangstar priced FLT-A2's shipped to 95608...

[A Spec Products]

Go ahead and PM me with your gangstar priced FLT-A2's shipped to 95608...

Gya

Aint nothing but a Compton thang

[blv2xlr8]

hey. can i get the price for rsr and jic for an s14 shipped to 32607. thanks.

[VIPCefiro]

dope parts, not windows. . ahhahaha, where do you get those fresh lines? PM or msg me your chronic pricing on them coilovers. . .i'm curious. Maybe you can bring those home in August too. kekeke.

[A Spec Products]

dope parts, not windows. . ahhahaha, where do you get those fresh lines? PM or msg me your chronic pricing on them coilovers. . .i'm curious. Maybe you can bring those home in August too. kekeke.

http://www.fatbeats.com/catalog/catalog_product_images/.products_image.INTR12S58410.jpeg

Whatever man

You know you are the biggest WINDOOOW SHOPPERRRRRRR JK

But yeah its a sad day when no one wants to run the REAL DEAL coilovers

Do it right the first time, you already spending the majority if you buy knockoffs, might as well save a pinch more and get gangster coils

[EchoOfSilence]

omg, these aren't sold yet?

price me, logan. S13 local pickup.

[lonelydrifter]

Price for both s13 sets shipped to 32817

[A Spec Products]

omg, these aren't sold yet?

price me, logan. S13 local pickup.

O-M-G indeed

http://www.dvdplaza.fi/reviews/images/menaceii1.JPG

Harry up and buy! I feel sorry for your motha!

WHAT DID YOU SAY ABOUT MY MOMMA?

[ripnbst]

Price for RSR for S13 to 16066, prolly cant afford them but for the hell of it I'd like to know what they run *ON SALE*.

[jpadilla12]

Price on JIC and RSR s13 shipped to 34743 FL. Thanks Logan

[A Spec Products]

http://www.michaelmartine.com/wp-content/uploads/2006/08/piggy_bank.JPG

Cliggidy clank
Cliggidy clank
My money goes straight to my pig-gy bank

More newspaper runs and sell more glasses of lemonade

Its a hot summer, lemonade sells itself

[Gjohnson7]

Can I get a price on both coilovers shipped to 74014?

edit: sorry s13

[A Spec Products]

Can I get a price on both coilovers shipped to 74014?

edit: sorry s13

Good look on the edit

Check your PM

[loydal]

lets have those prices for both s13 sets please......i need some coils and actually have a lil cash flow. thanks.

[A Spec Products]

lets have those prices for both s13 sets please......i need some coils and actually have a lil cash flow. thanks.

Check your PM

Cash flizzowwwwwwwwww

[Rasty180SX]

Are these sold yet? Shipping quote to 32043 for the S13 set. Thanks.

[spanishricer]

Please PM me the special price for the RSR's for the S14 shipped to 76016. I'm looking for a less aggressive coilover for the street.

[240on430]

S13 shipped to 94014?

[bryce with a y]

sick ass coilovers for sure. just dont go as low as stance!

[EchoOfSilence]

sick ass coilovers for sure. just dont go as low as stance!

who cares, really

[A Spec Products]

sick ass coilovers for sure. just dont go as low as stance!

I can always count on you to help my threads

:madfawk:

[ewuzh]

PM price for JIC S14 local pickup. Thanks!

[A Spec Products]

PM price for JIC S14 local pickup. Thanks!

Check your PM's

[scoobysti87]

can i get a price quote for s14 JIC FLT-A2's shipped to 07083

[A Spec Products]

can i get a price quote for s14 JIC FLT-A2's shipped to 07083

Check your PM

[A Spec Products]

I wish I could back in time

Back in like 2002

When 240 guys would do whatever they could to buy coilovers like these cause they wanted the BEST suspension for their car, rather than just something to do the job

Sigh

I still have:

(1) S13 FLTA2
(1) S14 FLTA2

I will sell these SO LOW, that after we lose CC% fees, we will be PAYING YOU to take these

But you lowballers don't get it twisted, these are still at least $1500

These are MSRP $2070 so there's no way I can get it cheaper than 15

GET AT ME!

[A Spec Products]

Reeediculous

These still aren't sold

Read above

You want AWESOME suspension holla at me

[LongGrain]

whats the deal with the RSRs? whats the specs on those? you say they are for someone looking for a more mild coilover? are they not good for track?

[EchoOfSilence]

wait, are you serious? hahahaha

i thought these sold at least 4 months ago

[A Spec Products]

wait, are you serious? hahahaha

i thought these sold at least 4 months ago

Nope

Same sets still here

I don't believe it either

whats the deal with the RSRs? whats the specs on those? you say they are for someone looking for a more mild coilover? are they not good for track?

RS-R's are more of a streetable coilover, since it uses urethane bushings and such

You could still track on them though, spring rates are still high

[EchoOfSilence]

how much shipped to 94720?
and picked up?

i''m thinking about it again

[A Spec Products]

how much shipped to 94720?
and picked up?

i''m thinking about it again

Check your PM

If I go any lower, I'll be underground, scraping frame

[sonnysmr2]

can you get me japan valved replacement shocks?

[crazyikimasho]

Rogan-san, it appears as if people would rather run cheap, "grab bag, who knows what valving, spring rates you actually got" coilovers than quality these days.

I guess as long as it looks good, thats all that matters right?

[A Spec Products]

can you get me japan valved replacement shocks?

Yes, these are the "Japan Spec" valving

If you already have a set and need it serviced/overhauled and want it to "Japan Spec" valving that is not a problem

Contact JIC USA directly, or go through the dealer you purchased them

JIC can do whatever you want really, in regards to valving/specs

[A Spec Products]

I STILL got these in stock

(1) S13 FLTA2
(1) S14 FLTA2

I will sell these SO LOW, that after we lose CC% fees, we will be PAYING YOU to take these

But you lowballers don't get it twisted, these are still at least $1500

These are MSRP $2070 so there's no way I can get it cheaper than 15

Anyone willing to step up to some real ish?

Holla at me

[now and later]

How much shipped to 93030 s13