Parting out my car (the 275 whp in torrance, CA)

[AWDSR20]

1990 240 RPS13 has the following:

I'm selling the whole motor for now (cus i payed $500 for tuning it) when u buy the motor u get all of the folowing:


SR20DET blk top
Power FC ECU tuned by SR sports
650 cc Detchworks inject
T28 dual Ball Baring turbo
Earls steal braded lines (for the turbo)
HKS adjustable actuator, boosting 1.0 bar
Boost controler (manual)
new OEM water pump
new Nismo Fule Press Reg
new Nismo thermostats
OEM S14 oil pick
OEM oil pan cleaned and resealed
New OEM power steering lines
Rebuild power steering pump
Apexi Power FC stand alone with hand held display and commander (http://www.zilvia.net/f/showthread.php?p=1396701#)
Z32 fuel filter
Gready rocker arm stopper
Walbro 255 pump
Greaddy suction kit adapter (for the Z32 MAF!)
275 whp dyno tuned running very strong! (i have the dyno graph) programmer tuned by SR sports (OEM ECU included)

Price: $3300

NEW (2 weeks old) KAZZ 2 way LSD in the pumpkin
Price $600 http://img19.imageshack.us/img19/1063/dsc01714fn7.th.jpg (http://img19.imageshack.us/my.php?image=dsc01714fn7.jpg)

HKS intake (SR20DET)
Price $30 http://img413.imageshack.us/img413/5853/dsc01742fx5.th.jpg (http://img413.imageshack.us/my.php?image=dsc01742fx5.jpg)

HKS down pip
Price $40 SOLD http://img413.imageshack.us/img413/240/dsc01746pi6.th.jpg (http://img413.imageshack.us/my.php?image=dsc01746pi6.jpg)

RS*R exhaust (http://www.zilvia.net/f/showthread.php?p=1396701#) 3 inch
Price $280 http://img413.imageshack.us/img413/9669/dsc01725hy4.th.jpg (http://img413.imageshack.us/my.php?image=dsc01725hy4.jpg)

New OEM Front control arm Ball Joint X2
Price $90 SOLD http://img413.imageshack.us/img413/8037/dsc01774um7.th.jpg (http://img413.imageshack.us/my.php?image=dsc01774um7.jpg)

New OEM Z32 Master Cylinder
Price $70 SOLDhttp://img413.imageshack.us/img413/4818/dsc01750dt1.th.jpg (http://img413.imageshack.us/my.php?image=dsc01750dt1.jpg)

Rebuild Rack and pinion + Tien Tie rod (w/ spacers)
Kazama Ball Joint end links + SPL rack and pinion bushings
Price $300 http://img413.imageshack.us/img413/8607/dsc01716nm3.th.jpg (http://img413.imageshack.us/my.php?image=dsc01716nm3.jpg)

Rebuild Z32 brakes (http://www.zilvia.net/f/showthread.php?p=1396701#) front (new pads, SS lines)
Price $200 SOLD http://img413.imageshack.us/img413/2113/dsc01764rp3.th.jpg (http://img413.imageshack.us/my.php?image=dsc01764rp3.jpg)

Z32 brakes Rear (new pads, SS lines)
Price $200 SOLD http://img117.imageshack.us/img117/5854/dsc01770oj0.th.jpg (http://img117.imageshack.us/my.php?image=dsc01770oj0.jpg)

Z32 Front Brake Rotor (drilled for 4 lugs)
Price $80 SOLD http://img413.imageshack.us/img413/7100/dsc01766zm1.th.jpg (http://img413.imageshack.us/my.php?image=dsc01766zm1.jpg)

Z32 Rear Brake Rotor (drilled for 4 lugs)
Price $80 SOLD http://img117.imageshack.us/img117/5557/dsc01768tv2.th.jpg (http://img117.imageshack.us/my.php?image=dsc01768tv2.jpg)

Koyo Radiator with (new Koyo Cap)
Price $190 SOLD http://img19.imageshack.us/img19/9026/dsc01761dn7.th.jpg (http://img19.imageshack.us/my.php?image=dsc01761dn7.jpg)

Hybrid Front mount intercooler
Price $30 http://img117.imageshack.us/img117/2228/dsc01720lq5.th.jpg (http://img117.imageshack.us/my.php?image=dsc01720lq5.jpg)

Blitz Blow off Valve
Price $200 SOLD http://img19.imageshack.us/img19/6672/dsc01785wj5.th.jpg (http://img19.imageshack.us/my.php?image=dsc01785wj5.jpg)

Nismo Power Brace
Price $100 SOLD http://img117.imageshack.us/img117/4941/dsc01729ks8.th.jpg (http://img117.imageshack.us/my.php?image=dsc01729ks8.jpg)

Tien Flex coilovers (rear left is broken)
Price $360 SOLD http://img413.imageshack.us/img413/9098/dsc01819wv3.th.jpg (http://img413.imageshack.us/my.php?image=dsc01819wv3.jpg)

Tien Tension rods X2
Price $120 http://img117.imageshack.us/img117/4162/dsc01732in9.th.jpg (http://img117.imageshack.us/my.php?image=dsc01732in9.jpg)

Tanabe sway bars SOLD!
Price $220 http://img19.imageshack.us/img19/3008/dsc01736xd7.th.jpg (http://img19.imageshack.us/my.php?image=dsc01736xd7.jpg)

Rear upper control (http://www.zilvia.net/f/showthread.php?p=1396701#) arm X1
Price $50

OEM digital display dash with center mounted tack (SR20DEt tack)
Price $100 SOLD http://img117.imageshack.us/img117/2524/dsc01757xq5.th.jpg (http://img117.imageshack.us/my.php?image=dsc01757xq5.jpg)

OEM S14 seats
Price $200 SOLD http://img413.imageshack.us/img413/5224/dsc01775kt0.th.jpg (http://img413.imageshack.us/my.php?image=dsc01775kt0.jpg)

SIMPSON 4 point harness
Price $60 SOLD http://img117.imageshack.us/img117/254/dsc01808un0.th.jpg (http://img117.imageshack.us/my.php?image=dsc01808un0.jpg)

SOLED {FNORC-1 (bronze) 17X8 Federal tiers F 235}X2 (damaged onlly 2 r ok) i will include the 2 damaged ones too.
Price for the 4 rims $200 (only 2 have tiers on) http://img413.imageshack.us/img413/9816/dsc01817zu3.th.jpg (http://img413.imageshack.us/my.php?image=dsc01817zu3.jpg)

Enkie (white) 17X8 (with Federal tiers 245) X2
Price for 2 rims and tiers $100 SOLD http://img117.imageshack.us/img117/7184/dsc01811xj8.th.jpg (http://img117.imageshack.us/my.php?image=dsc01811xj8.jpg)

Exide Select sealed battery
Price $60 http://img19.imageshack.us/img19/903/dsc01748uh7.th.jpg (http://img19.imageshack.us/my.php?image=dsc01748uh7.jpg)

Greaddy FMI piping
Price $90 SOLD http://img117.imageshack.us/img117/1990/dsc01727cr3.th.jpg (http://img117.imageshack.us/my.php?image=dsc01727cr3.jpg)

magan racing rear tow rod X1
Price $50

OEM SR20DET Starter
Price $90 SOLD http://img117.imageshack.us/img117/9090/dsc01789tp1.th.jpg (http://img117.imageshack.us/my.php?image=dsc01789tp1.jpg)

OEM Fan Shroud SR20DET (2 month old!)
Price $50 http://img19.imageshack.us/img19/5851/dsc01763vf1.th.jpg (http://img19.imageshack.us/my.php?image=dsc01763vf1.jpg)

OEM reservoir tank (no holes in it!)
Price $20 SOLD http://img413.imageshack.us/img413/4174/dsc01752dc2.th.jpg (http://img413.imageshack.us/my.php?image=dsc01752dc2.jpg)

OEM center console with ash tray
Price $20 http://img117.imageshack.us/img117/7650/dsc01797wb3.th.jpg (http://img117.imageshack.us/my.php?image=dsc01797wb3.jpg)

Head lights (not the sealed ones) with a new light bulb
Price $40 http://img19.imageshack.us/img19/9294/dsc01734fw6.th.jpg (http://img19.imageshack.us/my.php?image=dsc01734fw6.jpg)

SR20DET MAF
Price $40http://img116.imageshack.us/img116/3516/dsc01784ir3.th.jpg (http://img116.imageshack.us/my.php?image=dsc01784ir3.jpg)

Stock open diff
Price 20$

Tanabe REAR strut brace
Price $70 SOLD

NEW ITEM TANABE FRONT strut brace
Price $100


Please Email me ([email protected]) for shipping quotes if possible pick up preferred. U can me email me for more Pix thank u!
I also have my interior for sale, so email me if u need a specific part!

[windingroad_rps13]

U got PM.. how broken are the tein flex?

[silviatunersr20]

i want the tanabe ear strut brace and maybe te sway bars

[silviatunersr20]

oh and sell me the greddy suction intake please.. i need it bad.

[s15iv]

can you send me pictures of the 4 rims at [email protected], thanks

[240love]

hey can i get pics of the 4 rims too...where in socal are you..pick up available?

[AWDSR20]

i want the tanabe ear strut brace and maybe te sway bars

the sway bars are already SOLD bro, sorry.
The tanabe is still for sale.

thank u
eddie

[AWDSR20]

oh and sell me the greddy suction intake please.. i need it bad.

as u might know, it is for the Z32 MAF, i will sell it separate from the WHOLE motor if the motor dzn't sell.

thanks
eddie

[AWDSR20]

BTW,
anyone can come by my pad and pick up any part they buy.
thanks

[georgesal]

hey how much do you want for the power fc and aslo do you have the comander

[silviatunersr20]

as u might know, it is for the Z32 MAF, i will sell it separate from the WHOLE motor if the motor dzn't sell.

thanks
eddie

yea i need it for the z32 maf! I was hopein that you would sell it seprate from the motor so you can just stick it in with my tanabe strut bar and hks downpipe so when you get the shipping quote let me know cause I got the money in paypal ready for ya bro!

[TriniGT]

If eve ryou part out I want the turbo. What is the center section number?

[windingroad_rps13]

awd, nice meeting you bro. Let me know about the coils when you take em out. Thanks!

[AWDSR20]

If eve ryou part out I want the turbo. What is the center section number?

its a T28RS (BB turbo) good for 300whp
i will let u know if the motor dzn't sell!

[uwntsum]

interested in the hks mushroom filter for $30 do you still have it?

[AWDSR20]

hey how much do you want for the power fc and aslo do you have the comander

i'm trying to sell the motor as a whole, i will let u know if i have to part it out.
tnxs
ED

[lhoy12]

Hey ed, I sent you an email, check that and get back to me please? Thanks!

[UNITEDMASTER]

Hello there I sent you an Email LMK whats up with the sways. I hope that they are sold to me lollollol.

Also how much for just the front coilovers???

[projekt_s13]

damn ^^ you beat me to it. Look at my sig i need front coils, haha

If he doesnt take them then give me a quote for the fronts.

[s13coupedrfter]

Hey Ed thanks for the power brace! Good guy to do buisness with. +1 rep

[randps13]

Eddie is that you??? This is Randell. If not then I still am interested in buying ur turbo/brakes and other stuff. Thanks.

[AWDSR20]

Eddie is that you??? This is Randell. If not then I still am interested in buying ur turbo/brakes and other stuff. Thanks.

yeah its me sup bro!

[karl wasabi]

Hey, do you still have the nismo power brace. Very interested.

[AWDSR20]

Hey, do you still have the nismo power brace. Very interested.

No sorry, SOLD

[bustav13t]

Hey, I want the z32 master cylinder, pm me!

[nevaland9]

you only have one megan racing toe rod?

i will pay you today for the Z32 rotors, are the lines on the calipers the ones to mate up to S13 lines? if so could i throw you some extra money to throw in the lines also, i dont need the calipers.
PM me on how you would like to be paid.

[AWDSR20]

Hey, do you still have the nismo power brace. Very interested.

sorry bro, SOLD

[UNITEDMASTER]

Hello ,whats up with the sways & also whats the price on front coilovers only LMK ,THANKS

[silviatunersr20]

hey AWD did you ever get the shipping quote for me cause I want the hks dp and the tanabe strut bar ( and if you part out the engine, then the greddy suction z32) when you get it pm me the prices. THANKS

[AWDSR20]

hey AWD did you ever get the shipping quote for me cause I want the hks dp and the tanabe strut bar ( and if you part out the engine, then the greddy suction z32) when you get it pm me the prices. THANKS

on my way to the UPS store right now!

[swayray]

hey neighbor... i live in torrance too... consider those enkie wheels sold if you call me at my cell tonight...

[AWDSR20]

i added the Front strut bar to the list check it out!
thanks
eddie

[kikoeltravieso]

you still got the rack and pinion with the tein tie rods and kazama ball joint end links?

[swayray]

hey neighbor... thank you so much for the blow off valve...

[AWDSR20]

you still got the rack and pinion with the tein tie rods and kazama ball joint end links?

yeap i still have it dude, u can hit me up anytime bro when u want to check it out.

[AWDSR20]

hey neighbor... thank you so much for the blow off valve...

dude , no problem bro! good luck with ur car =)

[AWDSR20]

no one wants the motor?! 275 whp tuned?

[AWDSR20]

the KOYO and the KAZZ are not sold yet?!

[speedgod^s13]

Can you do 50 bucks shipped, including paypal fees, for the maf? Zip code is 96816.

[DRIFTING_SIL_EIGHTY]

Can you do 50 bucks shipped, including paypal fees, for the maf? Zip code is 96816.


i talked to him and he said $60 shipped. pm him if your still interested.

[silviatunersr20]

hey bro! part that intake! I feel like givin you some more money lol! I wish you the best on sellin that motor but if it comes down to parting it just let me know and i will take some stuff from ya.. later man!

[georgesal]

hey have you decided to part out the power fc

[kikoeltravieso]

hey i want to check out that rack and pinion

[quoc]

hey do you still have the SIMPSON 4 point harness if you do can i buy it

[Flybert]

Part out your motor. Please sell me the t28 this weekend. PM me your phone number if you are interested in selling it. My friend needs it for an event next weekend.

[AWDSR20]

everyone please call me at 310 806 2842 if u have any Q i have moved out of my pad and my internet conec is not up yet.

thank u all!

btw the simpson is not sold yet and the greaddy suction kit i will sell to silviatunner20 if my motor will not sell.

again thank u all!

[Crono562]

Pm'ed you about the steering rack.

Also let me know if you decide to part out your motor, ill pick up your power steering pump.

[abeTheDrifter]

Hey if u still got the engine for sale and the lsd, I'm interested in buying both can usend me some pics of the motor and the miles and more details on it.
Thanks
Abe

[DRIFTING_SIL_EIGHTY]

TO EVERYONE.......he currently doesnt have access to a comp at his house so he may be kinda laggy on replying. your best bet is to call him at 310 806 2842 his name is EDDIE.

to Crono562 and abeTheDrifter, what you guys are asking for is still availble. dont know if you guys pm'd him an offer though but ill let him know.

[driftage240]

hey man if u ever decied to part with the power FC lmk thanks...

[ag240sx]

is the fule pump a 255? and the hedights r for h.i.ds? if so i am ver intrested, lmk, 9519023248... im local and can pick up

[matts13vert]

Go away ^^