S14 Anti-sway Bar End Links

[flytwa78]

I just purchased S14 front and rear Cusco anti-sway bars. It was suggested that I change out the end links or get inserts for them. Does anyone here know where I can find these? Thanks guys.

[TheWolf]

debloz parts on fleabay will have your front sway bar endlinks. You can use SPL as well but they're expensive. Don't go junkyard diving for endlinks. I did and after going through 6 s-chassis's I couldn't get a regular front pair without striped this or bent that. For the rear I used a prothane kit.

[!Zar!]

Splparts.com is the way to go.

[hitman]

scooter made some himself for like 40$. send him 5$ and he might tell you

[floodo1]

spl isnt really expensive when you consider the quality of the heims that he uses. you can maybe make some cheap ones, but i doubt for 40....you need 4 heims alone

[DJ_Sunrise]

For drifting stiff as shit sway bars and endlinks are fine. If you look at road track cars, the sway bars usually aren't the stiffest shit available.. Stock with poly bushings, or stiffer.. but not over the edge. Or atleast stock endlinks are rocked. I have largus bars. With the poly bushings, the over steer was just insane. I put in OEM rubber bushings to loosen up the sways.. Car handles like a dream now. Great in the corners.

-Bart

[overb0ost]

scooter made some himself for like 40$. send him 5$ and he might tell you

heim joint and fc bracket = solid endlinks ftw

[flytwa78]

Where can I get poly bushings from? I know of one company but they sell it as part of a set of poly bushings.

[silnismo]

http://www.pdm-racing.com/products/suspensionbush.html

there u go. scroll all da way down. 28$ a set shipped to ur door.