silencer is impossible to remove, rsr gt2 exhaust

[devonkyle77]

i have been trying for hours to get this stupid silencer out. i obviously removed the nut and bolt that held it to the tip, but i cant get anything on silencer to pull it out. any suggestions?

[kouki_s14]

run the car for awhile and wear a glove to take it out, it might work. OR just pull really hard

[devonkyle77]

pull what though? the lip on the thing is too small to grab with anything.

[eastcoastS14]

nothing is too small for ASPEC!! http://www.aspecproducts.com/images.asp?theid=6054

[devonkyle77]

or..a coat hanger
thanks for the tip, cant believe i didnt think of that.

[MrChow]

or..a coat hanger
thanks for the tip, cant believe i didnt think of that.
:bash: *whaps you* yeah why didn't you =o jk jk

[Jefferson]

What I did with mine was took the nut and bolt out and drove around then took the coilover adjuster wrench and yanked it out, worked for me perfectly

[SSC299]

I got a huge bolt from Hope Depot and stuck the head in there to yank it out. I have to use it to hammer it in too.

[mRclARK1]

My silencer comes out easily, and does it's job great. :D

Just had to say that. haha

[thundering02]

Pair of vice grips and a Hammer...

[blu808]

http://www.aspecproducts.com/all_products/muffler/MU100.jpg
Usually that will work but you can allways get a 1/4" diameter rod bend it like the picture above, weld a nut on the other end and thread it to a slide hammer. That thing will pop right out

[ZX88]

[/QUOTE]Usually that will work but you can allways get a 1/4" diameter rod bend it like the picture above, weld a nut on the other end and thread it to a slide hammer. That thing will pop right out[/QUOTE]

i used something like that except one in a T shap so you can use a mallet to get it loose that what i did and my silencer came out easy

[crazy9ceguy]

just use the tool u have in ur car, the one to turn the small jack, i use that and it works, already has a hook on the end

[FinalDrive]

^ that's what i use too
works every time and it's free