PDA

View Full Version : s14 owners with edfc...

appleburger
06-07-2007, 01:07 PM
i'm trying to sell my rear JIC magic strut bar to a guy that has edfc on his s14 but he's worried it won't clear the motors. can anyone make a good guess by looking at the pics or know for sure if it would clear? thanks.

http://i19.tinypic.com/6akr0av.jpg
http://i12.tinypic.com/62onb5h.jpg
pbcstylez
06-07-2007, 02:33 PM
#1 I dont wanna sound like an ass
#2 this is a rear strut bar
#3 your motor is in the front of your car
#4 it wont affect the motor, only thing is you have to cut your rear speaker panel/board
DOOK
06-07-2007, 02:41 PM
#1 I dont wanna sound like an ass
#2 this is a rear strut bar
#3 your motor is in the front of your car
#4 it wont affect the motor, only thing is you have to cut your rear speaker panel/board

1- you did sounds a little assy
2- good observation
3- he's talking about the Tein EDFC motors, not the car engine
4- refer to number 3

The EDFC motors are only about the size of a match book and about an inch thick. It "should" clear ok.
bwalker240
06-07-2007, 02:43 PM
#1 I dont wanna sound like an ass
#2 this is a rear strut bar
#3 your motor is in the front of your car
#4 it wont affect the motor, only thing is you have to cut your rear speaker panel/board

lol. Do you know what an edfc is?

It is found both in the front and rear of the vehicle.



Appleburger,

Call Tein and get the exact height and width specs - you could answer your own question.
appleburger
06-07-2007, 03:27 PM
#1 I dont wanna sound like an ass
#2 this is a rear strut bar
#3 your motor is in the front of your car
#4 it wont affect the motor, only thing is you have to cut your rear speaker panel/board

lol, nice try.

thanks for the input guys.
red s14
06-07-2007, 05:40 PM
it will fit. i have that setup and you can also adjust which way the edfc motor is facing. he will have no problem. height is good and width looks good. rock on yo :rawk:
pbcstylez
06-07-2007, 06:20 PM
my apologies, i had originally perceived that nobody couldve possible been that stupid, I guess I read it wrong.
appleburger
06-07-2007, 10:56 PM
it will fit. i have that setup and you can also adjust which way the edfc motor is facing. he will have no problem. height is good and width looks good. rock on yo :rawk:

thanks a ton man!
TheWolf
06-08-2007, 05:12 AM
it will be even easier if you get a new EDFC with the black unit. Those motors are much smaller than the old silver units.
S14 Wannabe
06-08-2007, 06:30 AM
it will be even easier if you get a new EDFC with the black unit. Those motors are much smaller than the old silver units.

That's exactly what I have. Phase 2 was saying I might have a problem and needed dimensions as well but from what red S14 said he has the set up with the edfc and it fits. Thanks for the help and info everyone you guys rock.