West Covina Nissan - project S13

[crazyikimasho]

I figured I can probably start posting progress on the car... Ill fill in some details tonight when I get home.

Some new toys for the S13 so far...
http://photos.thenismoshop.com/sardrd1
SARD RD-1

http://photos.thenismoshop.com/craftsquares13
Craft Square TC-F

All products installed are available through TheNismoShop.com @ West Covina Nissan

[jdizzy204]

nice start. looking forward to seeing this car.:bigok:

[steve shadows]

so its a tach integrated into a boost controller? thats kinda cool

[atom]

It's not a boost controller, Sard RD-1 is more like a cheaper, slightly less configurable Stack dash display.

Call me stupid but anything Sard is cool. :)

[Slidin240Wayz]

where is the car?

[corey240]

where do you get that sard/stack piece? how much?

[BoostedCoupe]

i like the mirrors. wish i could fix that cracking up onthe top of my weather strip on them. the stack tack is cool to how big is is is it like a normal b/c or much bigger?

[crazyikimasho]

where is the car?
The car is actually my S13 coupe that Im retiring to track usage only. It will be going under some major renovations over the next couple months including:

-SR fully built and assembled by Garage Works in Palmdale
-Tomei 256 cams
-Tomei cam gears
-Tomei valve springs
-Tomei metal headgasket
-JWT valve guides
-CP Pistons
-brand new stock rods/bearings, etc
-Apex'i Power FC
-Tomei 740cc injectors
-GT2871R turbine

-Full custom cage by WrongWay SPL (AKA Henry Schelley)
-paint by Makito @ BOSO Garage
in Gardena
Not much to see as of yet, but Ill post up as we get more progress.

where do you get that sard/stack piece? how much?

We sell the Sard cluster at West Covina Nissan, MSRP is $1586 I believe. If you're interested Ill see what kind of deal I can work out for you. The black faced ones are in stock in the warehouse. I grabbed the last white faced one today, not sure when more are coming in.

[Dousan_PG]

woo hoo for GW

mine, stevents, lindsays and a few other guys i know rebuilt motors are running tip top and super strong after GW work!

2 years + on some!
mines a year and still running strong. awesome!

good luck justin!

[crazyikimasho]

woo hoo for GW

mine, stevents, lindsays and a few other guys i know rebuilt motors are running tip top and super strong after GW work!

2 years + on some!
mines a year and still running strong. awesome!

good luck justin!

Yes, I went to Cullen @ GW on recommendation by Dousan. I met Cullen for the first time last weekend. Very down to earth guy, he really knows his stuff. I did a lot of research with various shops, people, etc and narrowed it down to Garage Works.

From riding in Lindsay's car when he still had his S13 w/S14 SR built by Garage Works and seeing Dousan and Steven in action I was sold.

[crazyikimasho]

more toys arrived today...
http://photos.thenismoshop.com/cpcusco.jpg
CP Pistons: 9:1 compression, 86.5mm, Cusco 10.5 lbs chromoly flywheel

http://photos.thenismoshop.com/srparts.jpg
Final Konnection clear/red tails, Tomei 256/260 cams, Tomei 0.6mm 87mm bore headgasket, Eagle Rods, ARP main bolts

[C. Senor]

DAMN looking to be a sick ass car man.

[Anto]

ha ha ha. I thought that flywheel was a rotor


nice. baller.

[CKAMC]

post some pics of the fk's I haven't seen any yet besides the site so yeah I am interested.

what AR of the 2871 are you grabbing? slap it on the stock mani or aftermarket?

looking good justin, love the cusco fly

[Dousan_PG]

why not a nismo coppermix single plate clutch????
those seem pretty sweet

[azndoc]

Things look like it's coming along buddy.

Keep up the good work, then let me drive it when your done.

[crazyikimasho]

post some pics of the fk's I haven't seen any yet besides the site so yeah I am interested.

what AR of the 2871 are you grabbing? slap it on the stock mani or aftermarket?

looking good justin, love the cusco fly

the FKs... they are just the same clear/red tails you see everywhere made by Junyan. They were at Kure International, so I just snagged them. Ill post pics of them on Monday.

As for the turbo, .64 A/R and havent decided on manifold yet, I might use stock or get something nice. I really dont see any aftermarket ext mani being worth buying except the Full Race.

why not a nismo coppermix single plate clutch????
those seem pretty sweet

agreed, if I can get one here before the motor is done Im going to put one in and just sell the Cusco flywheel. We'll see what happens I still have a bit of time.

[crazyikimasho]

I finally broke down and bought a truck to tow my S13 with so that I can officially retire it to track only status.

http://i16.photobucket.com/albums/b42/crazyikimasho/frontier.jpg
http://i16.photobucket.com/albums/b42/crazyikimasho/frontierrear.jpg
2007 Frontier King Cab SE 4.0, 6spd, brilliant silver/graphite interior


I'm going to be picking up some wheel spacer/adapters so I can actually put decent wheels on later on, obviously a reciever hitch package and brush guards later this week.

[georgesal]

why not a nismo coppermix single plate clutch????
those seem pretty sweet

i love that clutch it rocks, that is what i've been using and it is just lovely

[dirtdiggler666]

well looks like its gunna be fun, and ya the guys a gw are cool i have know them for years, gl man.

[Flybert]

Justin, I don't know how I missed this thread. Your car is going to be so damn awesome. I'd kill for some craft mirrors. I was so tempted a few months back when someone on here had some for sale. What clutch you gonna get? RPS max 6 puck is nice and so are Exedy Stage 2 three pucks.

Make it home alright saturday night? I fell asleep like 20 times driving home. Northridge is too far for my blood. Damn charlie.

And +1 for Cullen and Garage Works. Good people and quality work. Can't go wrong.

[ALEXTHESUS*PECT]

i remember you had some pretty nice wheels before. if you ever decide to sell them let me know!

[azndoc]

Throw some D's on it, uhhh I mean Te37s on em' truck yo.

[CKAMC]

+1 for throwing on some ddddddddddddddddddddddd's on tha truck

a little different than base factory always looks good.

more pic of the car mang!

[Koopa Troopa]

Why did you pick those cams if you don't mind me asking?

[crazyikimasho]

Throw some D's on it, uhhh I mean Te37s on em' truck yo.

Yeah either TE37s or... Logan has some nice JAOS wheels laying around @ ASpec I might pick up. Much cheaper option.

+1 for throwing on some ddddddddddddddddddddddd's on tha truck

a little different than base factory always looks good.

more pic of the car mang!

Yeah brushguards, window visors, wheels and maybe step rails. Im trying hard not to do too much to it.



Justin, I don't know how I missed this thread. Your car is going to be so damn awesome. I'd kill for some craft mirrors. I was so tempted a few months back when someone on here had some for sale. What clutch you gonna get? RPS max 6 puck is nice and so are Exedy Stage 2 three pucks.

Make it home alright saturday night? I fell asleep like 20 times driving home. Northridge is too far for my blood. Damn charlie.

And +1 for Cullen and Garage Works. Good people and quality work. Can't go wrong.


Most likely Exedy Stage 2 since they are typically sitting on the shelf. They seem to work well for most that use them.

Yeah... Sat night, Northridge is way too far from home but at least his GF's friends are cute :)

Why did you pick those cams if you don't mind me asking?

Well I actually wanted 256/264 since Im going for response and Tomei only makes 260, not 264 so I figured it would be close enough and Id try it.

[Koopa Troopa]

I can't remember a time my RPM's ever dropped below 4000 while driving.. I'd have just gone with a solid head, double valve springs and 270 or 280 cams. You'll have a valve train that'll go to 10K after that. Then all you need to to work the lubrication system and you'll have all the sr's problems eliminated.

That's just what I recommend. The 256 pon cams are great cams but they won't go too far after the stock redline.

[mr_240sx]

i ahvent even seen the car yet but with all those parts im sure itll rock everyons fiddle!

[Dousan_PG]

stick w/ the 256s justin
264 is too big

anyways
that setup for the sr is pretty simple. mines the same. basic and reliable.


10k redline? waste of goddamn money
8k is more then enough.


oh btw
its a proven fact
you're tranny cant shift past 9k
so going beyond 9k w/ a stock trans is a waste of $$$

[CKAMC]

notchtop motor? if so start looking into the auto production boss nvcs pulley :)

[Koopa Troopa]

stick w/ the 256s justin
oh btw
its a proven fact
you're tranny cant shift past 9k
so going beyond 9k w/ a stock trans is a waste of $$$

Says who? That's the first time I've ever heard that, ever. Please explain further.

[Dousan_PG]

mattback and his 9k redline
his sr trans couldnt shift anything past 8600rpm
ill 2x check
he posted it on ZT and FA.

its nothing new.


here's the thread, if u can see it
http://www.ziptied.com/forum/viewtopic.php?t=10274&highlight=shift



there is absolutely no purpose for me revving this high

i can't get into the next gear. it locks me out.

7500 fine

8000 fine

8200 hard

8400 harder

8600 magic 8 ball

8800 six sided die chances of rolling a 6

9000+ anal with jenna jameson

[CKAMC]

Friendly reminder we are talking about a STOCK transmission.

I am sure a aftermarket unit could hold up with the abuse.

[Dousan_PG]

probably
but spend at least another 3k+ on a trans
cheapest is that company in austrilia
hks ones require constant maint/rebuilts

shits a waste of money.

[steve shadows]

probably
but spend at least another 3k+ on a trans
cheapest is that company in austrilia
hks ones require constant maint/rebuilts

shits a waste of money.


there are other options under 3k, including straight cut gears and a z32 tranny upgrade.

It all depends on what your doing.

8k Redline is just fine for most apps.

I rev to 8 all the time, make sure the head is shimmed as close to 0 as possible and everything is the motro is balanced, and RAS are installed. No worries.

Solids are great for drag racing setups with large compressors or race boxes and custom gear boxs

ps. its possible to shift from 3rd to 4th shifting at 8800 ive done it a couple times on stock g.box ;)

2nd-3rd anal sex with jenna jamenson

[Koopa Troopa]

Good thing I don't use an SR tranny but maybe his mission (wrong oil, lack of oil, etc.) was just shitty.. I've got a friend who was shifting at 9500 on a stock sr tranny but then again he was blowing them every other month....

[Orly? Yarly.]

...Whats the point of going to 10k?

If you really want to do that, buy my CA18ET. It's freakin' sweet because it has no redline. Haha!

[GoodOl'S13]

My buddy has TEs on a white titan and it looks good.

[wonkuuzenki]

hmmm....
Any plans for Aero? anything out of the ordinary at least?
Cause it all fucking looks so similar.

[Koopa Troopa]

...Whats the point of going to 10k?

If you really want to do that, buy my CA18ET. It's freakin' sweet because it has no redline. Haha!

Larger powerband, important for cars with large cams. My T04S won't hit max boost till 4500... If I redline at 8 then that's maybe 3,000 rpms of useable power... If I can rev to 10 then I've got a little more room for fun....

[crazyikimasho]

hmmm....
Any plans for Aero? anything out of the ordinary at least?
Cause it all fucking looks so similar.

Just a teaser pic (because we all know everyone loves teaser pics.... or not.)
http://i16.photobucket.com/albums/b42/crazyikimasho/JPtestfit.jpg

Taken tonight... I know these are dark and hard to tell but you get the idea. This kit is JP Aero www.jpusaco.com Basically sides and rear will be Vertex style. This kit will be used until the Sexy Style "style" kit is complete.

[wonkuuzenki]

Props for the Sexy Style Aero when you get the complete kit.

[ALEXTHESUS*PECT]

car looks like everything is coming along nicely!

[crazyikimasho]

Props for the Sexy Style Aero when you get the complete kit.

This kit pictured is the JP Aero kit. The Sexy Style stuff is still in production.

[wonkuuzenki]

yup. as said in the original post by you.

[crazyikimasho]

Parts still trickling in... the motor should be finished any day now. Since Ive pretty much beat up the SOHC down to its final days it will be pulled soon and the stitch welding will begin.

Another toy, being test fitted. Disregard the dirtiness from Buttonwillow last weekend.
http://i65.photobucket.com/albums/h238/crazyikimasho4/CFBpillar.jpg
Carbon Fiber B pillar from Kognition Design, very good fitment and looks awesome.

I also picked up a carbon fiber guage cluster delete panel that Mike @ Kognition custom cut for my Sard display. Ill take pics once I get it fitted. :)

Later this week carbon fiber canards from Vertex USA will be arriving as well for the front bumper.

[Dousan_PG]

i wanna see ur cluster setup justin!!
make me proud my friend!!

what u doing on the color for the car?

when's that SS kit done? i want one too! shits hot!!

[crazyikimasho]

i wanna see ur cluster setup justin!!
make me proud my friend!!

what u doing on the color for the car?

when's that SS kit done? i want one too! shits hot!!

I should have pics of the cluster setup this week once I adjust the panel a little. Im thinking about adding an additional boost guage later on the panel since there's room left. Kinda like you did... we'll see.

The car is going to be silver, most likely using the paint code from my truck and fine tuning it a little.

The SS kit is taking forever, Ken is being really picky about fitment. He wants to find a perfect S13 to do adjustments on the bumper with. So we'll see. My JP front bumper is almost done from Buttonwillow so Ill be needing a new one soon.

[Dousan_PG]

what busted already?

GET SREIOUS
that aero should last at least 10-15 events!!
control control!!!!!

fix it. frp repair is wicked easy. and cheap!!

[crazyikimasho]

what busted already?

GET SREIOUS
that aero should last at least 10-15 events!!
control control!!!!!

fix it. frp repair is wicked easy. and cheap!!

Yeah its easily fixed, but I want spares. I think the bumper came off like 3 times over the weekend and is in really good shape considering what it went through.

[Dousan_PG]

cmon man!! u gotta make it last longer then that
use more zts then or stay on track!

[Flybert]

Only time you should give up on a bumper is when half of it is missing and the pieces are scattered all around HTM like they should be. AHAHAHAHAA.

[crazyikimasho]

Yeah one day Ill learn how to stay on track.

After running Buttonwillow last weekend Im almost confident enough to attempt Horsethief Mile.

[Dousan_PG]

do itthis weekend
the 29th
let''s go justin! man up!

[crazyikimasho]

do itthis weekend
the 29th
let''s go justin! man up!

Don't know if Ill make this one, Alex is having a BBQ party at our house the same day. Next time for sure!

[boozels]

if you did bw then htm should not be a problem
the 2 will have track time for dayzzz!!

[Oubre]

Cant wait for this to be done, and more pics of the process.
Big thumbs up.

[koukikat180sx]

you do know i hate you right? jk. me luv you long time. you're such a lucky bastard.

[Dousan_PG]

Don't know if Ill make this one, Alex is having a BBQ party at our house the same day. Next time for sure!

ur gonna go to a bbq over a track event?



....

sounds like stew and you are peas in a pod.

[A Spec Products]

BOOOOOOORING

less talk more build

dont be a 6 year senior

graduate already!

[crazyikimasho]

ur gonna go to a bbq over a track event?



....

sounds like stew and you are peas in a pod.

If it wasnt at my own house, it would be the track event for sure.

[Dousan_PG]

it isnt your house though, its alex's. you rent a room.
go to the track
dont be a wuss.
i know your scared.
but everyone is at one point on HTM.

[A Spec Products]

Geez Aaron lay off him

His cat just went to the vet

And Alex can't be trusted by himself with lighter fluid

So he gots to be there

LOL

[Dousan_PG]

bwahaha thats true
chang is a lunatic!

[Farzam]

BBQ is such an evil word.

In NC it's pork pullin.
In Kentucky it's some chicken.
Oklahoma, ribs.
California...I don't even want to imagine.

[Flybert]

BBQ is such an evil word.

In NC it's pork pullin.
In Kentucky it's some chicken.
Oklahoma, ribs.
California...I don't even want to imagine.

In Cali, it's carne asada. Better recognize.

[ALEXTHESUS*PECT]

it isnt your house though, its alex's. you rent a room.
go to the track
dont be a wuss.
i know your scared.
but everyone is at one point on HTM.

damn aaron. imagine if you didn't like him!:spank:

[ALEXTHESUS*PECT]

In Cali, it's carne asada. Better recognize.

that's how we do it every weekend here in so cool......
http://mmm-yoso.typepad.com/mmmyoso/images/elportal07.JPG

and some:
http://parangaricutirimicuaro.blogspot.com/corona.jpg

[azndoc]

In Cali, it's carne asada. Better recognize.

True that way to represent Chris. Now go get some and come to the house tonight and grill it up.

[crazyikimasho]

And Darth Vader can't be trusted by himself with lighter fluid

So he gots to be there

LOL

Especially when he keeps mentioning the Darkside and referrring to the house as the Deathstar.

[Flybert]

Justin, how's the motor coming along. We're about to drop off chris' motor at garageworks this week too. I'm going out to disassemble it right now.

[crazyikimasho]

Justin, how's the motor coming along. We're about to drop off chris' motor at garageworks this week too. I'm going out to disassemble it right now.

I need to check on that haven't talked to Cullen lately.

chang (2:13:20 PM): but i've never mentioned the house as the death star
chang (2:13:39 PM): b/c i dont want the stupid teenage kids across the street to blow up the death star
chang (2:16:36 PM): and roll away in some aluminum falcon
chang (2:16:40 PM): that would be f*cked up

[mav1178]

And, more importantly, I don't want to be ridiculed on the phone about Padamame or Panda Bear by my supervisor.




-alex

[McRussellPants]

I want some bbq now.

http://www.saltlickbbq.com/images/pit6b.gif

=/

fuckk

[A Spec Products]

BBQ is such an evil word.

In NC it's pork pullin.
In Kentucky it's some chicken.
Oklahoma, ribs.
California...I don't even want to imagine.

We're still cooler than you

LOLz

[crazyikimasho]

BBQ is such an evil word.

In NC it's pork pullin.
In Kentucky it's some chicken.
Oklahoma, ribs.
California...I don't even want to imagine.

I grew up in NC, never heard of it called pork pullin. Back when I was there we used to have huge grills on trailers that we cooked full pigs on over night, it was still a BBQ to me.

Here in SoCal we mix it up... carne asada, kalbi, burgers... whatever. Thats how we roll. Thats what makes SoCal awesome we have everything.

[crazyikimasho]

Update from Garageworks: everything is balanced and is coming back from the machine shop. Cullen will be checking to see which bearings I need next week and should start reassembling shortly thereafter.

In the meantime Ill be doing some prep in the interior to get ready for WrongWay to put the cage in.

Im stoked!

[azndoc]

Update from Garageworks: everything is balanced and is coming back from the machine shop. Cullen will be checking to see which bearings I need next week and should start reassembling shortly thereafter.

In the meantime Ill be doing some prep in the interior to get ready for WrongWay to put the cage in.

Im stoked!

Have fun with that shit. Dry ice, chisel, and hammer it away buddy.

[A Spec Products]

Update from Garageworks: everything is balanced and is coming back from the machine shop. Cullen will be checking to see which bearings I need next week and should start reassembling shortly thereafter.

In the meantime Ill be doing some prep in the interior to get ready for WrongWay to put the cage in.

Im stoked!

ZZZZZZZZZZZZZZZZZZ

Wake me up when this gets interesting

No need dry ice, I mean it doesnt hurt but when I did mine I just used chisel hammer and elbow grizzease

[DOOK]

i hate people who actually have the money to do their build :D

[Dousan_PG]

sponsors help a lot

sounds good so far

[azndoc]

ZZZZZZZZZZZZZZZZZZ

Wake me up when this gets interesting

No need dry ice, I mean it doesnt hurt but when I did mine I just used chisel hammer and elbow grizzease

Come on it's Justin that's why I mention the dry ice.

I did my car and two other cars with just chisel and hammer. Didn't know if his precious fingers could handle it.


lolz

[DOOK]

sponsors help a lot

sounds good so far

wow, yeah I wouldn't know about sponsors

[crazyikimasho]

i wanna see ur cluster setup justin!!
make me proud my friend!!


crappy pic, but you get the idea...
http://i65.photobucket.com/albums/h238/crazyikimasho4/sardcluster.jpg

Its setup so that the tach is dead center. I have room on the left to add a larger boost gauge or something should I choose to do so. Ill have to take the cluster out of the car and try test fitting everything this weekend.

[Dousan_PG]

NIIIICE i like! so cool. does that CF piece mount to the stock white plastic thing????

[tacotacotaco]

Fuck the dry ice be a man and chisel at it dousan style manly man. More pics quicker updates lets get this freight train moving.

[CKAMC]

how many meters do you plan on running all together other than the ones available on the Sard unit and boost gauge? Or just have the two you said and leave everything else to the RD-1?

[Ian]

dry ice makes it much much easier...


i did it with a hammer in cold weather (dents up the metal but who fuckin cares right? i just hit it w/ a hammer til it popped off in big chunks...took me less than an hour to do the whole interior)

[A Spec Products]

Fuck the dry ice be a man and chisel at it dousan style manly man. More pics quicker updates lets get this freight train moving.

Dousan manly style?

I wasn't aware he was so known for his sound deadening removal skills

LOL

That's a super clean dash panel though

[jrocslider]

I want some bbq now.

http://www.saltlickbbq.com/images/pit6b.gif

=/

fuckk


hey isnt that bbq place in austin or like right outside of austin?

correct me if i'm wrong or did you just google bbg and paste a pic cause thats what i would have done. but seriously i think i've seen it before...

whatever i want sum brisket and ribs now

oh yeah... back on topic. i wanna see sum pics of the car. all those parts waiting for the car look delicious too

[kognition]

Wow, that actually looks pretty sick. Extra room for more stuff too. How heavy is the meter btw?

crappy pic, but you get the idea...
http://i65.photobucket.com/albums/h238/crazyikimasho4/sardcluster.jpg

Its setup so that the tach is dead center. I have room on the left to add a larger boost gauge or something should I choose to do so. Ill have to take the cluster out of the car and try test fitting everything this weekend.

[crazyikimasho]

how many meters do you plan on running all together other than the ones available on the Sard unit and boost gauge? Or just have the two you said and leave everything else to the RD-1?

Im thinking probably just analog boost to have something easier to read for boost. We'll see though, trying to keep it as simple as possible.

Wow, that actually looks pretty sick. Extra room for more stuff too. How heavy is the meter btw?

Ill have to find a scale to weight it, its kinda heavy for a meter though to be honest.

[G-Wagon]

Im thinking probably just analog boost to have something easier to read for boost. We'll see though, trying to keep it as simple as possible.



Ill have to find a scale to weight it, its kinda heavy for a meter though to be honest.

I would only have two gauges, to keep everything as simple as possible.:2f2f:

[crazyikimasho]

test fitting...
http://s65.photobucket.com/albums/h238/crazyikimasho4/sardtestfit.jpg

[IES13]

test fitting...
http://s65.photobucket.com/albums/h238/crazyikimasho4/sardtestfit.jpg

That's pretty sick! Oh ya my bro did pick up a 240sx hatch from Millano last weekend. Woah!

[fromxtor]

I am definitly getting one of those composite gauge panels fro my setup also. Looks good Justin.

[DOOK]

that's pretty sexy, I'll have to admit.

[Slidin240Wayz]

Sweet and simple. I never thought those would look good, but you made it possible.

Bling Blao!

[kognition]

They were designed for function first, looks second. It just happens to have a nice dry carbon finish. The foam core between the top and bottom laminates is actual aircraft foam core. It has a 300 degree service temp, and is flexible and tough. It is without a doubt, the best material money can buy for this application. We recently made a batch of blank panels for a major F1 team in Europe. They of course do their own in house machining because everything they do is so competetive and proprietary. We sent samples out to all of the F1 teams awhile back, and generated some interest in our blank stock. Our blank panels are easy to dremel out for custom work also.


Sweet and simple. I never thought those would look good, but you made it possible.

Bling Blao!

[crazyikimasho]

I am definitly getting one of those composite gauge panels fro my setup also. Looks good Justin.

Yeah for the price Mike is selling this stuff for, you really can't go wrong.
http://kognitiondesign.com/

So far I've only gotten the gauge panel and the B pillars. I'm going to see if Mike can do some other custom stuff for me as well.

I've seen Logan's stereo delete panel, in person, with his Greddy gauges installed as well and that came out pretty nicely as well. I would do the same with that but Im keeping my CD player in stock position.

[crazyikimasho]

Just took these out of the box to snap a pic, they wont be going onto the car until it gets back from paint.

http://photos.thenismoshop.com/zealfunctiond

[RUTH'LESSDET]

man your such a tease!!!:bash:

[CKAMC]

aww fucking a man you just keep on doing it so good, LOVE THE COILS :bigok:

[azndoc]

Lucky bastard.

I hate Justin.

I like your gauge though and your new adj. suspension.

[ALEXTHESUS*PECT]

paint is for neewbies. spray can front bumpers for the real dori masters!

car sounds like it's coming along nicely!

[A Spec Products]

Dude you suck

I am newly elected president of the "Justin Sucks" hate club

Who wants to join?

Lawlzzzzzz

Hurry up with your car brah!

[DOOK]

Dude you suck

I am newly elected president of the "Justin Sucks" hate club

Who wants to join?

Lawlzzzzzz

Hurry up with your car brah!

make me a member cause I hate everyone with nice parts :loco:

[crazyikimasho]

test fitting fiberglass overfenders tonight before the car goes to G-Dimension to have the rear fenders cut and tack welded

http://i65.photobucket.com/albums/h238/crazyikimasho4/fendertestfit.jpg
Don't pay attention to the wheel fitment, that will be corrected shortly. Obviously exhaust is not staying either.

http://i65.photobucket.com/albums/h238/crazyikimasho4/interiorstrip.jpg
90% of the interior stripped, still need to remove some more sound deadening and clean it all up with a wire wheel before its off to the fab shop for cage.

[C. Senor]

damn you that is just looking sexy as it is. i'm jealous of those lights, i want them........i'll be member 3 by the way.

[Slidin240Wayz]

Zeal...beautiful.

This is a prime example of how a car should be worked on. Thank you.

Quality...what?
http://og-made.com/archives/1445

[Wiisass]

This is a prime example of how a car should be worked on. Thank you.


This makes me wish I had the pictures from working on Justin's old S14 at my house a few summer ago. Trying to remove a small dent with a very large hammer. It would've been perfect.

[kognition]

Justin,
I just finished the reproduction molds for the S13 Coupe rear valences. Go into production on Monday. Exact fitment as the oem version. :angel:
RE: sound deadening, i saved all my sound deadening from the interior and weighed it on the digital scale, 30 lb's!

test fitting fiberglass overfenders tonight before the car goes to G-Dimension to have the rear fenders cut and tack welded

Don't pay attention to the wheel fitment, that will be corrected shortly. Obviously exhaust is not staying either.

90% of the interior stripped, still need to remove some more sound deadening and clean it all up with a wire wheel before its off to the fab shop for cage.

[crazyikimasho]

Justin,
I just finished the reproduction molds for the S13 Coupe rear valences. Go into production on Monday. Exact fitment as the oem version. :angel:
RE: sound deadening, i saved all my sound deadening from the interior and weighed it on the digital scale, 30 lb's!

I need to get those door panels from you as well.

[azndoc]

Member no. 4 here.

I hate Justin.

(I know he's smiling right now with his little smirk as he's reading this.)

Yes fucker I'm jealous.

[GSXRJJordan]

Eh, it's aiight. Maybe the Zeals and an extra 200ft-lbs will make him drive better.


(Member #5) >:/

[x'ed]

I bought a head gasket from you last week, but I think I am starting to hate you to. Good job on the car man, looks like things are coming along awesome!

[tknbkthrsdy4anfg]

Yea Justin got me some nismo mounts, I dont hate him.
car looks like its coming along nice.

[x'ed]

gotta say he was great to deal with, got the head gasket for bucks, mckinney wanted 80 bucks plus shipping. Hey Justin, you never gave me the price for those megan coilovers, this is Mike from last Saturday, I came in with my girlfriend. Can you pm me the price if you ever found it?

[crazyikimasho]

gotta say he was great to deal with, got the head gasket for bucks, mckinney wanted 80 bucks plus shipping. Hey Justin, you never gave me the price for those megan coilovers, this is Mike from last Saturday, I came in with my girlfriend. Can you pm me the price if you ever found it?

Saturday? Im not here on Saturdays. As for Megan coilovers we don't sell those here. Sorry. You can try Sam @ JSpec he sells them.

[A Spec Products]

Membership dues can be sent to me via mail or paypal.

It's a move-ment!

OG MADE

HATERS

[Wiisass]

Logan, I want to be VP of this club. I think I've been hating Justin longer than everyone else, ever since I tried to help out one night when I was at his old shop in NC and I come out from working all night to find my wheels painted like a picnic table cover.

[crazyikimasho]

Logan, I want to be VP of this club. I think I've been hating Justin longer than everyone else, ever since I tried to help out one night when I was at his old shop in NC and I come out from working all night to find my wheels painted like a picnic table cover.

That paint job on your wheels was a custom one-off deal. I cant believe you didn't like it. That took some time and effort to come up with that and mask it off. Im appalled you didnt run your car with them like that. ....or did you?

[eastcoastS14]

Membership dues can be sent to me via mail or paypal.

It's a move-ment!

OG MADE

HATERS

so is justin one of the writers on og made?

[crazyikimasho]

so is justin one of the writers on og made?

No, Logan does some guest appearances (writing) there. OG-Made is primarily the guys at Endless/Zeal/AME USA, Dom and Kent.

[Wiisass]

That paint job on your wheels was a custom one-off deal. I cant believe you didn't like it. That took some time and effort to come up with that and mask it off. Im appalled you didnt run your car with them like that. ....or did you?

I don't remember if I ran them or not. That weekend is still a blur. I think I might have ran them for a little but then decided to repaint them about halfway through the event. I don't know, maybe they would've come out better if there was a decent spray paint selection in Goldsboro at 4am.

[A Spec Products]

No, Logan does some guest appearances (writing) there. OG-Made is primarily the guys at Endless/Zeal/AME USA, Dom and Kent.

i.e cool guys: standing room only

[GSXRJJordan]

Rogan-san, what am I lookin at for an executive subscription? I've counted all the times he's hated on me/my ride, and I've been saving up... I've gotta get all my "you're ride's so wack" jokes out while his ride is still, you know, more wack than mine. Help me feel like a man.

lol.

[t . b o z]

How much do those SARD mirrors go for? The heat has taken a toll on my stockies, and the the double sides tape/glue literally melted and the glass fell out and broke all over the ground :ugh:

[crazyikimasho]

http://i65.photobucket.com/albums/h238/crazyikimasho4/fendercut1.jpg
http://i65.photobucket.com/albums/h238/crazyikimasho4/fendercut2.jpg

Alex Pfeiffer (Battle Version) cut and welded my rear fenders today to prepare to mount the over fenders the correct way. Its cut at just the right place, not too high, not too low and the multiple metal layers were welded together and grinded down.

[koukikat180sx]

i still hate you justin....

[crazyikimasho]

i still hate you justin....

Bring your car over here and Ill fix it for you. :)

[crazyikimasho]

A little over 25mm that the wheel needs to come out to be flush
http://i65.photobucket.com/albums/h238/crazyikimasho4/fendertopview.jpg

An idea of what it will look like with everything mounted
http://i65.photobucket.com/albums/h238/crazyikimasho4/fenderrearview.jpg

To keep the front fender from flopping around and to hold it in place, a new OEM fender bracket was added at the bottom
http://i65.photobucket.com/albums/h238/crazyikimasho4/frontfenderbrace.jpg

According to AIT, these front fenders are 30mm over, I think they're more like 20mm. Regardless with my 17x9 +12 up front and about 2 degrees of camber with slight toe in, the wheels are just about flush on this side. The steering wheel is turned slightly to the right in the pic.
http://i65.photobucket.com/albums/h238/crazyikimasho4/frontfender.jpg

[arkive43]

lookin great! needz moar action shotz!!!!!

[GSXRJJordan]

looks fantastic. Those're AIT 30mm rear overs, with a 25mm spacer?

[crazyikimasho]

looks fantastic. Those're AIT 30mm rear overs, with a 25mm spacer?

They are 50mm rears, pushed in. There isnt a spacer on yet. It just 17x9 +12 in the rear without a spacer until it comes back from paint.

[CleanS14]

Ghettofab... so ghettofab

[Ninjabread]

nice build hehe.

subscribed!

[Alan_no.1]

look nice!! but wat color u want the paint?

[crazyikimasho]

look nice!! but wat color u want the paint?

Its going to be a very light silver (i.e. Mercedes silver), with some added metallic.

[koukikat180sx]

Bring your car over here and Ill fix it for you. :)

for free? ok! :fruit:

[Brian]

Is this car going to feature a turbocharger?
Can we purchase this specific turbocharger at West Co Nissan?
Please respond A.S.A.P.

[crazyikimasho]

Is this car going to feature a turbocharger?
Can we purchase this specific turbocharger at West Co Nissan?
Please respond A.S.A.P.

It may even feature products from Veilside that you can purchase from Veilside

PM sent! Thanks Mr. Loyal Customer

[A Spec Products]

Logan, I want to be VP of this club. I think I've been hating Justin longer than everyone else, ever since I tried to help out one night when I was at his old shop in NC and I come out from working all night to find my wheels painted like a picnic table cover.

Yes, you don't leave two things around him: your car or your sister

How much do those SARD mirrors go for? The heat has taken a toll on my stockies, and the the double sides tape/glue literally melted and the glass fell out and broke all over the ground :ugh:

The mirrors I believe you are referring to are actually Craft Square

They are $505 or $545 list, depending on which model you get

Extra charges are for black bases, blue mirror lense, etc

[LB.Motoring]

http://i65.photobucket.com/albums/h238/crazyikimasho4/fendercut1.jpg
http://i65.photobucket.com/albums/h238/crazyikimasho4/fendercut2.jpg

Alex Pfeiffer (Battle Version) cut and welded my rear fenders today to prepare to mount the over fenders the correct way. Its cut at just the right place, not too high, not too low and the multiple metal layers were welded together and grinded down.



Damn, alex should have cut up higher, I think your only running 17's so I guess its cool, but if I would have done it I go atleast an inch above the line.

[crazyikimasho]

more fun stuff...
http://photos.thenismoshop.com/clearcascover

Testing these out on my new CAS.

[A Spec Products]

more fun stuff...

Testing these out on my new CAS.

Phase 2's clear CAS cover eh

Poser

I want one

[Alan_no.1]

I just see ur car today.... 626 area is toooo small .

[crazyikimasho]

Phase 2's clear CAS cover eh

Poser

I want one

I picked one up for you. No worries :)

...and I have some in stock for anyone that wants them.

[steve shadows]

Phase 2's clear CAS cover eh

Poser

I want one

why? who cares?

its like having a clear valve cover, although thats funny, especially when the motor is making good oil pressure.

[A Spec Products]

why? who cares?

its like having a clear valve cover, although thats funny, especially when the motor is making good oil pressure.

I said I wanted one

But he is still a poser

Looks before performance

Thats my motto

I picked one up for you. No worries :)

...and I have some in stock for anyone that wants them.

Good lookin out

I know they were running low on stock I think, so good you grabbed me one

I'll get it when I'm back in town

Chyea

[TheTimanator]

Its going to be a very light silver (i.e. Mercedes silver), with some added metallic.

really? I've been contemplating what white wheels would look on a silver 240. My car is already silver :bigok:

[A Spec Products]

really? I've been contemplating what white wheels would look on a silver 240. My car is already silver :bigok:

Nothing to contemplate

Accessing brain...

Yes, looks fine to me

[TheTimanator]

Nothing to contemplate

Accessing brain...

Yes, looks fine to me

aww, well, obviously I hadn't put a lot of thought into it :p ha.
For some reason I got in my head two light colors wouldn't go together well. I might as well be color blind...

[crazyikimasho]

White wheels on silver car looks like this...
http://www.finalkonnexion.co.jp/lineup/popup/toyota_img/toyota_img_17_a.jpg

[A Spec Products]

White wheels on silver car looks like this...
http://www.finalkonnexion.co.jp/lineup/popup/toyota_img/toyota_img_17_a.jpg

Cause someone will ask

Those are Gram Lights 57 Optimise

And *cough*, speaking of which I have a set in stock in white 18x9.5+12 all around ;)

[Dousan_PG]

such a goddamn whore logan


hahahahahahhaa
hurry back to ca. miss you.

[crazyikimasho]

such a goddamn whore logan


hahahahahahhaa
hurry back to ca. miss you.

Teaser pic...
http://photos.thenismoshop.com/bnhood
http://photos.thenismoshop.com/bnlogo

[JVD]

...FUCK! I'm in the Justin hating club or whatever.

[Dousan_PG]

hha
add me to that club!!
we got matching hoods justin oooh! ooooh!
see u tomrrow! muhahahahahah

SHIT IS AWESOME!!

this hood latch better work then my current hood hahahaha


AWESOME
im so excited

[CKAMC]

hell yeah, now that is a real hood!

[Full-Lock]

did you get that hood out of a dumpster? lol

http://www.ziptied.com/forums/index.php?topic=14999.0

[Irukandji]

ugh... bn hood makes any car awesome

[crazyikimasho]

did you get that hood out of a dumpster? lol

http://www.ziptied.com/forums/index.php?topic=14999.0

Yup the freight company came by with what must have been a dumpster, that in turn damaged one of the hoods :(

Therefore they came out of a dumpster... haha

[Slidin240Wayz]

Ballin...doin it correct.

I love this thread.

[2iv0 sx]

Another man's trash is another man's treasure...

[azndoc]

Justin I'm just sitting here waiting for you know what.....

[crazyikimasho]

slowly coming along...
Had Henry (WrongWay) do some stitch welding in the engine bay over the weekend then had him add in a plate where the battery tray used to be

http://i65.photobucket.com/albums/h238/crazyikimasho4/struttower.jpg
http://i65.photobucket.com/albums/h238/crazyikimasho4/batterytray.jpg

...and off to the body shop tomorrow

http://i65.photobucket.com/albums/h238/crazyikimasho4/trailer.jpg

[A Spec Products]

slowly coming along...
Had Henry (WrongWay) do some stitch welding in the engine bay over the weekend then had him add in a plate where the battery tray used to be

...and off to the body shop tomorrow



Yeahhhh Henry is the man

Hurry up and finish already

You are tortoise mode

such a goddamn whore logan


hahahahahahhaa
hurry back to ca. miss you.

I just saw this (Hawaii needed me brah)

Ctrl + P

Magneted to my fridge

[UfoZ8myCow]

Can we get some special T Shirts made for the "I hate Justin" club??

[koukikat180sx]

Can we get some special T Shirts made for the "I hate Justin" club??

See Justin! I'm not alone! :keke:

[A Spec Products]

Can we get some special T Shirts made for the "I hate Justin" club??

There isn't enough ink

or cotton

To supply the amount of raw materials we would need to print the mass quantity of shirts to supply the demand

We would need to make baby t size too, for your sisters as well

[crazyikimasho]

There isn't enough ink

or cotton

To supply the amount of raw materials we would need to print the mass quantity of shirts to supply the demand

We would need to make baby t size too, for your sisters as well

This is what you need for your sisters
http://www.stereogum.com/img/ididjustin.jpg

[s13coupe805]

LOL fukin justin, car lookin real sik man

[A Spec Products]

Twee Time

Tree Time

[IES13]

http://www.garpot.com/images/justin-club.jpg
Taking orders...haha...Hi Justin...I couldn't help myself...I guess I should go back to work now...peace!

[crazyikimasho]

http://www.garpot.com/images/justin-club.jpg
Taking orders...haha...Hi Justin...I couldn't help myself...I guess I should go back to work now...peace!

Good thing Justin is misspelled!

[IES13]

damn it...just wait...

[Slidin240Wayz]

Good thing Justin is misspelled!

It's a replica...that's why.:rofl:

[crazyikimasho]

It's a replica...that's why.:rofl:

fo sho!! its a knockoff!!!!!!!!

Get the real deal, the one that says I "heart" Justin!!!

SAY NO TO KNOCKOFFS!!! :)

[IES13]

Ok its...fix...damn...knockoffs...must of got it off Ebay!

[crazyikimasho]

teaser pics...
http://i65.photobucket.com/albums/h238/crazyikimasho4/shocktowerapron.jpg
http://i65.photobucket.com/albums/h238/crazyikimasho4/frontview.jpg
http://i65.photobucket.com/albums/h238/crazyikimasho4/shocktowerapron2.jpg

This is only the interior/engine bay color. The exterior will be silver instead of grey. The pics and flourescent lighting in the bay make the color look much brighter, in person its darker.

[HalveBlue]

Purdy.

I need to learn how to weld.

And paint.

[crazyikimasho]

Purdy.

I need to learn how to weld.

And paint.

I know how to do neither of those. :)

Henry @ WrongWay did the welding, Makito who has a shop in Santa Fe Springs did the body prep/engine bay painting.

[Slidin240Wayz]

Continuing on the right track. Are you going to do the Steering rack bushings?

[crazyikimasho]

Continuing on the right track. Are you going to do the Steering rack bushings?

I put ES ones in a while back. I will be putting in one of these aluminum steering bushings in as well though http://us.st11.yimg.com/us.st.yimg.com/I/phase2motorsports_1965_107618013

[Slidin240Wayz]

Yanack for the steering rack?

[Dousan_PG]

hey justin
i cant get online
but did my BN kit arrrive yet??

and also

CAR LOOKS AWESOME!!! holy shit!!

[RUTH'LESSDET]

teaser pics...
http://i65.photobucket.com/albums/h238/crazyikimasho4/shocktowerapron.jpg
This is only the interior/engine bay color. The exterior will be silver instead of grey. The pics and flourescent lighting in the bay make the color look much brighter, in person its darker.

your doing alot of teasing here Jus:rant2:

[crazyikimasho]

hey justin
i cant get online
but did my BN kit arrrive yet??

and also

CAR LOOKS AWESOME!!! holy shit!!

Your kit came in today. I made the truck driver stick around while I took everything out of the box and inspected it :)

[azndoc]

Your kit came in today. I made the truck driver stick around while I took everything out of the box and inspected it :)

After you inspected it and signed for it did you wipe off any liquids you may have left on the kit?

Make sure you do.

I don't think Aaron wants sloppy seconds.:keke:

[GSXRJJordan]

lolz at the jiz on Dousan's kit. Is that corrosive to primer?

Justin you are serious turtle mode here man. I keep clickin this thread to see the finished product, and you keep disappointing. As usual.

I <3 Justin shirts? No thanks.

[Slidin240Wayz]

No need for an overnight miracle.

Rome was not built in a day. I think the progress is great considering the quality parts and work going into the car.

Carlos

[blu808]

Very nice build.

when should it be done?

[crazyikimasho]

Justin you are serious turtle mode here man. I keep clickin this thread to see the finished product, and you keep disappointing. As usual.

I <3 Justin shirts? No thanks.

No comment.


Very nice build.

when should it be done?

Aiming for the end of the year, we've had to focus all our resources on getting the site launched and currently working to make it function well so the car has been on the back burner for the past month or two.

The engine is assembled minus accessories, so I need to go pick that up. The car is being moved down to a body shop that is spraying it for us then hopefully I can get the motor dropped and the car back to Henry for the remainder of the fabrication.

[KRPS13DEMON]

very nice car can't wait to see complete

[Dousan_PG]

thanks justin i appreciateit
ill beback in about 1week or so

anyways
caris awesome.
hurry up and finish it!!!
lets drift!!!

[crazyikimasho]

thanks justin i appreciateit
ill beback in about 1week or so

anyways
caris awesome.
hurry up and finish it!!!
lets drift!!!

Im going to go see Cullen this weekend, he has a lil something for me.

[X 350GT X]

I put ES ones in a while back. I will be putting in one of these aluminum steering bushings in as well though http://us.st11.yimg.com/us.st.yimg.com/I/phase2motorsports_1965_107618013

Justin,

what did you mean by ES? nice build.

[sideview_180sx]

energy suspension. easy street. english sex. engrish session.

don't worry earth day will have come and passed, by the time justin gets the engine dropped in.

[crazyikimasho]

energy suspension. easy street. english sex. engrish session.

don't worry earth day will have come and passed, by the time justin gets the engine dropped in.

haha yeaaaah, the car is at the body shop getting paint, Cullen has my motor all ready for pickup just need to go out there and get it from him and start mounting all the accessories, etc.

[A Spec Products]

haha yeaaaah, the car is at the body shop getting paint, Cullen has my motor all ready for pickup just need to go out there and get it from him and start mounting all the accessories, etc.

teenage mutant ninja turtles
teenage mutant ninja turtles
teenage mutant ninja turtles

heroes in a half shelf

turtle power!

*edit* holy crap i really typed SHELF. damn wtf it musta been super late lol i swear i saw "shell" when i typed it

[Ian]

I thought that it was "heroes on the half shell"

[joefresh]

haha ya
it is actually " Heroes in a half-shell"
dont question it i had all the toys
o btw justin, car is looking great!

[crazyikimasho]

Slow progress... but progress.
http://photos.thenismoshop.com/srhead
Picked this up from Garage Works on Saturday. Now time to finish assembling the motor.

[wookieballa]

damn justin, that shit looks so clean!!

[wookieballa]

damn brother, no love for an oldschool friend? how the hell are you? my old phone took a shat, so i dont have your number anymore. give us a call sometime soon mang.

[DJButton]

Garage Works looks like da ish! Good stuff Justin, car is coming together! :coolugh:

[crazyikimasho]

damn brother, no love for an oldschool friend? how the hell are you? my old phone took a shat, so i dont have your number anymore. give us a call sometime soon mang.

werd Ill shoot you an email with my number, hows your projects coming along?

[Wiisass]

Get it done already, this build thread is boring.

[kognition]

Will we be seeing you guys at Laguna Seca or ButtonWillow in a couple weeks?


werd Ill shoot you an email with my number, hows your projects coming along?

[crazyikimasho]

Will we be seeing you guys at Laguna Seca or ButtonWillow in a couple weeks?

I wish I could get the car together in time, dont see it happening. The car will most likely be on display for the Nissan Festival in Fontana at California Speedway. I don't foresee it running at that time though. :(

[DJButton]

:hsdance: Bahh, nonsense just take a week off to finish it!

[kognition]

You guys don't stop working at 5 PM do you ?:rant2:
If your not up at 3am working on your car like the rest of us, ..... :spank:

I wish I could get the car together in time, dont see it happening. The car will most likely be on display for the Nissan Festival in Fontana at California Speedway. I don't foresee it running at that time though. :(

[crazyikimasho]

You guys don't stop working at 5 PM do you ?:rant2:
If your not up at 3am working on your car like the rest of us, ..... :spank:

Yeah I wish it was simple as that. Right now the car is at the body shop, as for what goes on once it returns, there are some other issues beyond my control that may take a bit longer. Still actually many more parts that need to be purchased as well to make the car run.

In due time my friends, in due time. It will all come together just not as fast as I would like.

[Ricks15]

A justin you dont know if ken at Shine is done making the sexystyle kits?

[kognition]

Well, as soon as the season is over, it starts up again in Feb. Just enough time to get it together. :bigok:

Yeah I wish it was simple as that. Right now the car is at the body shop, as for what goes on once it returns, there are some other issues beyond my control that may take a bit longer. Still actually many more parts that need to be purchased as well to make the car run.

In due time my friends, in due time. It will all come together just not as fast as I would like.

[240trainee]

Get it done already, this build thread is boring.

+1, I keep seeing new posts and no updates...:mrmeph:

[wookieballa]

KA-t, its coming along, i'm about to finish putting the motor back together, its gonna be nice though..

AMS rebuild,
AEM EMS,
JGS mani, and WG
GARRETT GT3071R
BRIDE ergo's
URAS kit
5zigen fno1rc's (bronze)
hmmmm, 740cc injectors..
s13 cams..

i'm stoked about it. shoot me an email mang.

[xfallen1x]

Great build Justin. Dig the set up. Hope to see it at the Festival.
:rawk:

[240trooper]

i know this is kinda late tho, but this is for the high rpm's
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/N1ETaClsA7M&rel=1"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/N1ETaClsA7M&rel=1" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

[B Love]

More updates. haha Who is painting the car?

[crazyikimasho]

More updates. haha Who is painting the car?

This paint shop affiliated with the dealership, they do a lot of our reconditioning.