PDA

View Full Version : For those of you who INSISIT on running e-manage ultimate...

steve shadows
06-05-2007, 11:59 AM
http://www.boomslang.us/ultimate.htm

Just thought this might help. Instead of destroying your japanese wiring harness.

Although its' about 240 bucks. this is the only way I would run one...

of course you could get a power fc and data logit for a little bit more and have a real EMS ;)
projectRDM
06-05-2007, 09:25 PM
Very cool. Good find.
95Blue240sx
06-06-2007, 02:39 PM
Couldnt you just get another ecu, salvage the male plug from it and solder the wire from the emanage to it? It would be the same thing. Takes some time and a ecu pin-out
steve shadows
06-06-2007, 02:40 PM
Couldnt you just get another ecu, salvage the male plug from it and solder the wire from the emanage to it? It would be the same thing. Takes some time and a ecu pin-out


yeah, you could.
projectRDM
06-06-2007, 03:04 PM
Couldnt you just get another ecu, salvage the male plug from it and solder the wire from the emanage to it? It would be the same thing. Takes some time and a ecu pin-out

But you would need the male and female ends to do a bypass harness. That's a lot of salvaging shit.
johngriff
06-06-2007, 05:52 PM
Finding New pins for the harness plug is not fun. Cut and solder isnt either.