socal sr20det motorset MUST SEE!!!!!!!!!!!!!!!!!!!!!!!!!

[s13coupedrfter]

SOLD SOLD SOLD SOLD
http://i34.photobucket.com/albums/d137/Ameeroff/100_2910.jpg

http://i34.photobucket.com/albums/d137/Ameeroff/100_2911.jpg

http://i34.photobucket.com/albums/d137/Ameeroff/100_2912.jpg

http://i34.photobucket.com/albums/d137/Ameeroff/100_2913.jpg

http://i34.photobucket.com/albums/d137/Ameeroff/100_2917.jpg

http://i34.photobucket.com/albums/d137/Ameeroff/100_2918.jpg

Will include:

-Blacktop sr20det with wire harness (60k)
-Kazama engine mounts
-EFI specialist tuned ecu (gt2871r, z32 maf, 555cc injectors, 7800 rpm limit)
-Garret gt2871r .64 a/r turbo (800 miles) on stock exhaust manifold
-Circut Sports braided lines
-Greddy elbow
-HKS actuator
-HKS 264 in/exh cams (pulls clean all the way to redline)
-HKS lash killer kit (solid lifters)
-HKS rocker arm stoppers
-HKS mushroom filter (500 miles)
-z32 MAF
-Nismo 555cc injectors (500 miles)
-Nismo FRP (300 miles)
-ebay oil pan (no leaks)
-NGK iridium plugs (500 miles)
-Unorhodox crank pulley with new belts
-Custom intercooler and piping with Blitz BOV on cold side
-silicone boots with T-clamps
-Visteon rad with dual elec fans (pulls alot of air)
-Nismo thermostat (never overheated once)
-Good tranny with no grinds (used only redline fluid)
-Peak-Performance race tranny bushing with tranny brace
-like new slave cylinder
-B&M knockoff short shifter (love this thing)
-Nismo pivot
-ACT 11lbs prolight flywheel (very responsive)
-Exedy stage 2 puck clutch (grabs hard with light pedal effort)
-Driveshaft shop lightened 1 piece driveshaft (steel)

[s13gold]

if ur selling the battery. i offer 50 bucks.

[s13coupedrfter]

Batteries not included:D

[zenogias]

Sorry i didn't read you werent going to seperate. Got too excited.

[twofourty]

This motor is very well taken care of, kickass car.

[tougemiata]

legit guy who is very honest. i bought his old car and it is legit and i got it in excellent condition. dont hesitate to buy anything from him, he is trustworthy man who takes care of his shit.

shane-dont have the money (shocker i know) but if i did i would be allll over that cuz my motor is on its last leg right now..ugh....

[locodrftr]

hmmm satin black coupe???were u at the gymkhana on march 11th i was in a white hatch i was the guy leaking powersteering fluid everywhere lol nice car and great work on your car

[celica3sgte94]

how much you want for it im near gardena so i can pick it up too let me know just PM me back

[turtle m3th]

Bump for a good seller and friend. This motor is great guys, i've ridin in this car several times over the past year or so and it gets faster and faster everytime because shane is always fucking with it. haha, but seriously whoever jumps on this deal (wish I had the money to) will be getting a race ready motor set with all of the kinks worked out so all you've gotta do is slap this pig in and rip. And to you auto guys looking to swap to manual it's an extra plus for you guys because you get that drive shaft and I believe the tranny brace and peak performance bushing as well, all you need is the clutch master and pedal assembly and your good. So if anyone need the parts I listed (clutch master, s13 clutch pedal assembly and if he doesn't throw it in the tranny brace) if you buy shane's setup i'll ship the parts to you to make your life that much easier. Good luck on the sale mang! L8Z

[s13coupedrfter]

Thanks guys for all the great post. Who ever picks this up will have a kick-ass motor. I'm taking a loss on this but it's worth my loss to make someone happy and to have a rb25 monster!

[ripnbst]

Too bad you arent willing to ship, I am in PA and in DIAR need of a motor. Let me know if you change your mind.

[ctm_motortrends]

Great Motor and set up. Got to see it run at the Aerodyne event this guy kicked everyones ass including mine took 1st place. Good luck wish you would sell me the intercooler and rad. set up. +1 Green for a great price. Someone jump on the motor FAST.

[s13coupedrfter]

Thanks ctm, Aerodyne's events are so much fun

[vutony]

Intercooler piping alone cost me 1200 bucks.

did u mean the whole kit or just pipings

wat kind of difference? beside throttle reponse
any cooling issues

[topsecretgold]

VERY nice setup!

[s13coupedrfter]

The custom piping alone cost me 1200 bucks, the intercooler I got off ebay for 300 bucks. The quality of the kit is top notch. The shop who did the piping is Under Pressure Fabrication (714)890-5153. There is no cooling issues and the car has never overheated once. The key to this setup is good electric fans.

[BustedS13]

The custom piping alone cost me 1200 bucks

okay, now, i'm not saying your setup isn't very, very clean. but how is that even possible? there's like three feet of pipe there.

[Young & Artless]

Sweet. My shop is in Gardena too. Any power numbers?

-Chas

[s13coupedrfter]

okay, now, i'm not saying your setup isn't very, very clean. but how is that even possible? there's like three feet of pipe there.

My original quote was 600 bucks but ended up twice that. Call the shop up and ask them. I'm not sponcered by them so I payed like anyone else. I should have mentioned that the 1200 bucks included install of the rad/intercooler (the whole setup w/brackets). Sorry for the mistake. The shop had to pull the rad anyway so I gave them the Visteon to put in place of the stock rad. You get what you pay for and I think the quality shows.

[BustedS13]

My original quote was 600 bucks but ended up twice that. Call the shop up and ask them. I'm not sponcered by them so I payed like anyone else. I should have mentioned that the 1200 bucks included install of the rad/intercooler (the whole setup w/brackets). Sorry for the mistake. The shop had to pull the rad anyway so I gave them the Visteon to put in place of the stock rad. You get what you pay for and I think the quality shows.

it definitely looks like quality work.

[sidedrifts13]

Shane Who Ever Buys Your Motor Set Will Be Very Happy B/c The Way You Take Care Of It JUST LOOK AT THE PICS AND WAIT TO TEST DRIVE IT, Damm Thats A Fucken Great Deal, Good Luck With The Sale And Congrats To Who Ever Is Going To Come Up On This Beautiful Motor, Take Care Shane

[s13coupedrfter]

4000 bucks and the motorset can be yours!

[Ameer]

I got a ride in this car in the malibu canyons, it is fast as fuck and very reliable. I have known shane for years and never seen ANY problems. I have seen the motor when it was bone stock with the t25 and sidemount intercooler. shane babied this car since day one. Very nice guy who will even let you test drive the car in person. I can vouch for shane any day.

[s13coupedrfter]

Exhaust is sold!!!!!!

[s13coupedrfter]

PRICE DROP 4000!!!!! Will not go any lower...if this motorset does not sell I'm keeping it. This motor rips and I'll be stoked to keep going with it.

[brian m]

PM'ed interested.

[s13coupedrfter]

Pm'd returned

[initialrt]

yo shane its grant from gymkhana events, gold hatch. bump fa you

[s13coupedrfter]

I'm making a custom heat shield for the stock exhaust manifold, should look way better than the ugly stock one, keep ya posted.

[miltinsky]

Shane brought his car by my work and let me tell you his motor kicks a$$. I wish i had the money, to buy it.. who ever jumps to this deal will not regret it. :drool:

[90S13dude]

How much for the driveshaft???
Chris

[steve shadows]

yeah I can vouch for Shaun (sp?*) and his setup is quite nice and appropriate for drifting type of work.

bummer your going RB shaun...haha maybe ill drop one in my coupe too

[Addicted2Kouki]

i like how you mounted your intercooler and the piping.
+1 for you.


no clearance issues?

[s13coupedrfter]

There's no clearance issues. The key is good fans to keep everything cool, the car has never overheated or detonated. This is a very reliable motorset.

[s13coupedrfter]

Shameless BUMP

[s13coupedrfter]

I have a extra 14 lbs Exedy flywheel for sr20det 200 bucks in good condition if anyone is interested.

[s13coupedrfter]

SOLD!!!! Going to a good home, thanx Ryan