View Full Version : how close is too close? Skyline Calipers
Chrischeezer
06-02-2007, 12:55 PM
hello, my setup
work vs-xx wheels 18x8.5+25
r33 gts-t front brake calipers and rotors
rotors drilled to 4 lug
everything fits good, BUT the "Nissan" logo on the caliper hits the wheel's spokes. so i used a 3mm wheel spacer. now it fits and spins free.. BUT its SOOO tight. i can get two sheets of paper between the logo and the wheel, THATS it i have never seen it that close before, and i really don't wana shave the logo.
im not going to have a problem will i??
Pictures will come later today. :)
chmercer
06-02-2007, 01:24 PM
i really don't wana shave the logo.
fag
space it more anyway, wheel size sounds sunk. get a 25mm bolt on.
Chrischeezer
06-02-2007, 02:23 PM
fag
space it more anyway, wheel size sounds sunk. get a 25mm bolt on.
ahh.... no dik.. its flush like a fucking toilet.
"space it more anyway" lol.. ur dumb
LB.Motoring
06-02-2007, 02:27 PM
trashy.
+25?
get a 25mm spacer.
+0 is better.
chmercer will agreee.
98koukile
06-02-2007, 02:31 PM
Why not just do a 5mm spacer, I'd personally love barely any gap but just in case
Chrischeezer
06-02-2007, 02:44 PM
trashy.
+25?
get a 25mm spacer.
+0 is better.
chmercer will agreee.
do u know what a 8.5 +22 off sent looks like on a s13?
""oh, then ill have the BALLIn off set yo!"" ohh shhhiiit! ill be the bomb!!!
im looking for function here.. PAL... sorry but i have a 240 not an open wheel f1 car.
:fruit:
Chrischeezer
06-02-2007, 02:47 PM
Why not just do a 5mm spacer, I'd personally love barely any gap but just in case
i wanted to do a 5mm.. but... i was scared of loosing stud length,.. and the wheels now sit very flush.. i might have to roll a little more now.
but has anyone ever run into problems having the wheel spokes and calipers Super close?
ill grind off "some" nissan logo.. but only a little. i like it..
BlackTruenoAE86
06-02-2007, 02:52 PM
as long as everything is tight the wheel is not supposed to move and hit the caliper. My dad used to have a friend that owned a Euro Tuning shop and almost all the cars they had the calipers were about a credit card distance from the wheel.
ThatGuy
06-02-2007, 02:55 PM
I'm running a wider wheel with a lower offset and it sits flush. 18x10 +15mm, OEM fenders rolled and slightly pulled. No crazy camber either.
So if you need more room for the brakes, and you don't want to shave the logo, go with a larger spacer. Go with a 15mm bolt on. Plenty of clearance on the brakes then, and you should still get a way with just a small pull.
OptionZero
06-02-2007, 02:55 PM
you could always dremel the letters away
it's free, no spacer required
by the way
that is not flush
and if you wanted function, why are you running 18x8.5 +25?
projectRDM
06-02-2007, 02:56 PM
You're fine. I've had cars where a business card will slide in between the spoke/caliper and get stuck, neither part is going to flex or expand enough to be an issue.
Chrischeezer
06-02-2007, 03:13 PM
thank you that was the type of info i was looking for..
ill still post pics, cuz it's hot
Chrischeezer
06-02-2007, 03:19 PM
you could always dremel the letters away
it's free, no spacer required
by the way
that is not flush
and if you wanted function, why are you running 18x8.5 +25?
Function as in... "this set up" must "function" i dont have money for other wheels.
TipStylez
06-02-2007, 03:37 PM
Still aint flush.
But i wanna see pics.
Chrischeezer
06-02-2007, 04:47 PM
PICS!!!!!!!!!!!
ok maybe not "STUPID flush but its not far off
(my suspension should drop a tinny bit since its brand new. dont mind the gap)
http://i87.photobucket.com/albums/k141/ChrisCheezer/flushmaybe.jpg
http://i87.photobucket.com/albums/k141/ChrisCheezer/flushtop.jpg
-this is the rear.. not flush at all.. could use a 5mm
http://i87.photobucket.com/albums/k141/ChrisCheezer/notflushrear.jpg
http://i87.photobucket.com/albums/k141/ChrisCheezer/brakesoutside.jpg
zip-tie doesnt fit
http://i87.photobucket.com/albums/k141/ChrisCheezer/ziptiebrake.jpg
#13 feeler gauge fits snug
http://i87.photobucket.com/albums/k141/ChrisCheezer/13feelergauge.jpg
chmercer
06-02-2007, 05:52 PM
youre so gay
clutch kick drifter
06-02-2007, 06:03 PM
youre so gay
:bigok: threads done :fruit:
if it clears , and dosent rub during some drift racing then your a big 10-4, no need to ask people
Chrischeezer
06-02-2007, 06:13 PM
youre so gay
what the fuk are u talking about!?
why u so mad?
:bigok: threads done :fruit:
if it clears , and dosent rub during some drift racing then your a big 10-4, no need to ask people
car doesnt run yet...
NemeGuero
06-02-2007, 06:32 PM
I wanna laugh.
How much did you spend on 18's that you can't afford better wheels in a 17 or decent spacers?
FaLKoN240
06-02-2007, 06:38 PM
Haha, they're hella making him mad. You're falling into their trap.
Don't go running off to 240SXforums or NICO talking about how gay Zilvia is.
Chrischeezer
06-02-2007, 06:39 PM
$750.. i win
235345627547
nah this place isnt gay... its just full of wierdoooosssss (prolly ka ppl)
these guys are just soo damn cool
ThatGuy
06-02-2007, 06:46 PM
You have sufficient answers. I'm ending this thread now.
:lockd:
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.