View Full Version : sr help...
crazybb
05-30-2007, 01:50 AM
i need help.. i just upgraded my redtop sr with a sc50 turbo, walbro 255 fuel pump, n62 maf, 600cc fuel injectors, tial 38mm wastegate and 50mm blow off valve.. it idles great on start ups and runs like a champ.
the problem i am having is when i am driving it and im going above 30 mph or just got on it and i push in the clutch, the rpms drop and its dies unless i give it some gas.. i cant figure it out..
hope someone can help me...
Katsumbhong
05-30-2007, 02:08 AM
clean out your MAF and make sure all the sensors are hooked up tight.
crazybb
05-30-2007, 08:47 AM
i will try cleaning my maf today.. i hope that works... thanks katsumbhong
slider2828
05-30-2007, 10:36 AM
Check your plugs, see if any problems with ignition.
sleepy_s13
05-30-2007, 11:53 AM
dont get the maf sensor wet with anything they get messed up really easy.
s13silvia123
05-30-2007, 12:55 PM
its the maf sensor i'm having the same problem rite now too. just correct the wiring. and whatever EMS you have. have it caliberate with the n62 maf.
crazybb
05-30-2007, 09:06 PM
ok..i got some maf cleaner i will clean it tomorrow.. i have me ecu tune by enthalpy.. i have a n62 maf, the plug i have suppose to be color code to hook up to my harness..
slider2828
05-31-2007, 04:47 PM
Check it anyways, I did a write or diagram for the exact wires for hte MAFS. go search for it. Just to amke sure
crazybb
05-31-2007, 09:10 PM
i guess i will check the wiring.. i cleaned out the maf today and it does the same thing.. going to check the plugs this weekend to see how they look like. any other ideas??
fliprayzin240sx
05-31-2007, 11:06 PM
Does it bog when you come to a stop? If it does, could be the bov releasing too fast for the ECU to recover. Try recirculating it.
crazybb
05-31-2007, 11:54 PM
i dont think you can recirculate a tial.. i could be wrong though... i hope i get it fix soon.. was going to go to the track, but i want to fix this problem first..
180sxLove
06-01-2007, 05:37 AM
I used to run a 50mm on my SR with a similar setup.. Car would run hard, but if I let go of that clutch in neutral and let the rpm fall, the car would stumble and die out. You would have to baby it until it idled.
I switched my BOV to a Greddy Type S and recirculated it and its never idled better.
Unless you can't rev your car over 3500 RPM then its not your MAF.
crazybb
06-01-2007, 07:33 AM
man.. i hope i can get it to work with my tial.. i love it and i got a great deal on it
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.