Apexi boost & turbo timer, 300zx Z32 calipers/rotors/wheels/Intercoolers/ARC engine c

[CPARKPowertrix]

Apexi boost & turbo timer, 300zx Z32 calipers, rotors, wheels, Intercoolers, ARC engine cover

Cleaning out the garage again. Some new and used Z32 parts that I no longer have use for as I sold my project 240.

300zx 28mm Z32 calipers and rotors----------------------------------------SOLD
300zx 30mm front calipers S15 rear calipers---------------------------------$250.00
ARC Titanium Gradiation SR20 black top engine cover------------------------$100.00
New Apexi Mech Boost Gauge----------------------------------------------SOLD
New Apexi Meter Control unit-----------------------------------------------$69.00
New JWT POP Charger Intake for Z32 300zx---------------------------------$90.00
OEM stock intercoolers-----------------------------------------------------$200.00
OEM NA 300zx wheels------------------------------------------------------$150.00


300zx/S15 30mm front calipers S15 rear calipers----------------------------$250.00
Will seperate. Front calipers for $200.00 rears for $50.00.
http://www.streetneeds.com/uploads/auser/S15Z32calipers.jpg

ARC Titanium Gradiation SR20 black top engine cover---------------$100.00
Very rare and unique multi colored titanium engine cover imported from Japan. In like new condition. Brand new they are $189.00

http://www.streetneeds.com/uploads/auser/ARCgradation1.jpg

New Apexi Meter Control unit---------------------------------------------$69.00
Brand New in the box. The main control unit can accommodate up to 6 meters. This gives the user unprecedented flexibility to decide what type of meter to add and how many. All meters come with a multi angle stand to allow easy reading from any vantage point. Since the main processor is not inside of the meter itself, A'PEXi engineers were able to slim down the meter casing so that it can be mounted virtually anywhere inside the cabin. The high speed control unit processor also eliminates excess wires between the meter and unit. Go here fro more info: http://www.apexi-usa.com/product_electronics_detail.asp?id=205&pageNum=1
Retails for $90.00

http://www.streetneeds.com/uploads/auser/apeximetercontroller.jpg

New JWT POP Charger Intake for Z32 300zx---------------------------$90.00
BRAND NEW. Great for those using a Z32 MAF

http://www.streetneeds.com/uploads/auser/JWTintake.jpg

OEM stock intercoolers------------------------------------------------------$200.00
They are in excellent condition and includes all brackets and hardware plus the OEM IC ducts to increase efficiency. Great for a custom application and racing designs.

http://www.streetneeds.com/uploads/auser/OEMICs.JPG

OEM NA 300zx wheels------------------------------------------------------$150.00
In great condition with only one or 2 minor scraps or scratches that are barely noticeable. They are the 7.5 width. Tires may need to be replaced or patched as one has a leak.

http://www.streetneeds.com/uploads/auser/Z32wheels.jpg

Please feel fee to contact me with any questions.
Charles Park
[email protected]
6419-944-6055

[240love]

noob question but does the boost gauge need something like a controler like the defi ones? and does it come with everything for installing it?

[yusuke1923]

How much shipped for turbo timer?

[Drifter Z]

ARC Titanium Gradiation SR20 black top engine cover.

is that for S14SR blacktop notch back??

[180PWR]

Are the calipers 26mm or 30mm?

[CPARKPowertrix]

noob question but does the boost gauge need something like a controler like the defi ones? and does it come with everything for installing it?

No, The mechanical boost guage is completely stand alone and comes with everything you need to install it and make it work. I only bought the controller you see listed as I was going to get other electrical gauges. Thanks.

[CPARKPowertrix]

How much shipped for turbo timer?


Shipping is the continental US will be $10.00. TOTAL $90.00. My paypal address is [email protected] Thanks.

[CPARKPowertrix]

ARC Titanium Gradiation SR20 black top engine cover.

is that for S14SR blacktop notch back??


Hello, it will fit the S14-S15 blacktop with downward slant in the back of the cam cover. see pic:

http://srownersclub.com/faq/i/s14whiteclip2.jpg

[Irukandji]

No, The mechanical boost guage is completely stand alone and comes with everything you need to install it and make it work. I only bought the controller you see listed as I was going to get other electrical gauges. Thanks.

Mechanical gauges just require a 12v source and a ground. Then just route vacuum line into your cabin and plug it into the back of the gauge. Doesn't require the controller unless its an electronic boost gauge. hope this helps the o.p.

edit: i realized seller already answered the question. d'oh

[CPARKPowertrix]

Are the calipers 26mm or 30mm?

The ones pictured in the original above post with the rotors are 26mm but I also have a set of 30mm front calipers and rear calipers off of TIEN's S15 that are in great condition. I'll sell the set of 4 for $300.00 or just the fronts for $250.00. See pic below:

http://www.streetneeds.com/uploads/auser/S15Z32calipers.jpg

[CPARKPowertrix]

Bump. still availible

[CPARKPowertrix]

Apexi turbo timer SOLD. Thanks.

[CPARKPowertrix]

bump, offers?

[CPARKPowertrix]

still availible

[CPARKPowertrix]

Apexi Boost Gauge SOLD Thanks.

[jimmytango00]

and the control link right? or did i misunderstand you yesterday.

[CPARKPowertrix]

Listed components still availible. Thanks.