turtl631
05-29-2007, 09:55 PM
I'm de-boosting my KA so some parts are available. Lots of good stuff, it was all run on my car for a few months with pretty limited miles, maybe 2000 highway, 500 city, 30 track.
Turbo240/AMS GT32 turbo: Great KA turbo, spools quick and can make over 400 whp. In great shape, no shaft play, never smoked at all, wheels are pristine. Comes with oil return flange. $650
JGS KA24DE turbo manifold, downpipe, dumptube: Topmount log manifold with T3 flange and Tial 38mm style WG flange. Not the DIY kit, this is the premade manifold they sell. Comes with the JGS downpipe, 2.5" and wrapped in header wrap. It also has a O2 sensor bung near the bottom, and a 5 bolt flange for the turbo. Finally, comes with JGS wastegate dump tube, which dumps out the bottom of the engine bay. All you need with this package is a T3/T04E (or GT32) and an SR20 downpipe to mate up to your cat. $500
Hybrid GT Spec intercooler: Nice big 24x12x3 inch core with 3" inlet/outlet. It looks nice since it was mounted behind my A/C condensor and didn't get pelted with road debris. $150
JGS 40mm wastegate: Has the newer JGS WG spring in it, also will include older low and hi boost springs, along with shims to fine tune boost if you don't have a boost controller. $200
JGS oil lines: -4 AN stainless steel braided oil feed, 5/8" silicone return hose. Also comes with tee and adaptors to source oil from stock oil pressure sender and oil feed fitting/flange for turbo, as well as oil return fitting for turbo. $70
Turbo blanket: Fits standard T3 turbines, pretty universal sizing so it should be fine on most turbos. Really helps keep engine bay temps down. A little worn on the inside, looks fine on the outside. SOLD
Various silicone couplers and T bolt clamps: 135* 3" coupler ($25 shipped with clamps), 2 3"->2.5" reducers ($20 shipped each with clamps), as well as accompanying clamps. Blue couplers, no writing on them at all.
I'll try to get some pics up tomorrow, didn't get a chance today.
Shipping is extra, these prices do not include shipping unless noted. I'm in Chicago if you want to pick up.
If interested in anything, email me ([email protected]). If you post here I won't see it for a while most likely, and its just easier to email from the get go.
Thanks for looking!
Turbo240/AMS GT32 turbo: Great KA turbo, spools quick and can make over 400 whp. In great shape, no shaft play, never smoked at all, wheels are pristine. Comes with oil return flange. $650
JGS KA24DE turbo manifold, downpipe, dumptube: Topmount log manifold with T3 flange and Tial 38mm style WG flange. Not the DIY kit, this is the premade manifold they sell. Comes with the JGS downpipe, 2.5" and wrapped in header wrap. It also has a O2 sensor bung near the bottom, and a 5 bolt flange for the turbo. Finally, comes with JGS wastegate dump tube, which dumps out the bottom of the engine bay. All you need with this package is a T3/T04E (or GT32) and an SR20 downpipe to mate up to your cat. $500
Hybrid GT Spec intercooler: Nice big 24x12x3 inch core with 3" inlet/outlet. It looks nice since it was mounted behind my A/C condensor and didn't get pelted with road debris. $150
JGS 40mm wastegate: Has the newer JGS WG spring in it, also will include older low and hi boost springs, along with shims to fine tune boost if you don't have a boost controller. $200
JGS oil lines: -4 AN stainless steel braided oil feed, 5/8" silicone return hose. Also comes with tee and adaptors to source oil from stock oil pressure sender and oil feed fitting/flange for turbo, as well as oil return fitting for turbo. $70
Turbo blanket: Fits standard T3 turbines, pretty universal sizing so it should be fine on most turbos. Really helps keep engine bay temps down. A little worn on the inside, looks fine on the outside. SOLD
Various silicone couplers and T bolt clamps: 135* 3" coupler ($25 shipped with clamps), 2 3"->2.5" reducers ($20 shipped each with clamps), as well as accompanying clamps. Blue couplers, no writing on them at all.
I'll try to get some pics up tomorrow, didn't get a chance today.
Shipping is extra, these prices do not include shipping unless noted. I'm in Chicago if you want to pick up.
If interested in anything, email me ([email protected]). If you post here I won't see it for a while most likely, and its just easier to email from the get go.
Thanks for looking!