From the begining to almost completed....

[spools14]

UPDATED PICS PAGE 2 and page 5!


This car was bought over the winter. When i purchased the car it was completely stripped (read: EVERYTHING) No interior, no chassis harness, no panels, very little sound deadening left, everything was gone. It was destined to become a drag car. The pervious owner removed the stock front rad support and front wheel arches, and welded in round bar.

There is still an enormous amount of work to be done, but it runs now..lol
Everything on the car has been replaced. Every bushing is poly, all suspension arms have been replaced or strenghtened. All of the engine bay chassis wiring was relocated under the dash including the 2 fuse boxes.

Nick from Omega Motive and Marshall from Street Dynamics both helped with the build. Nick designed and fabricated the intake manifold and Marshall Designed and fabricated the turbo manifold, and I/C piping. They helped me out a lot and were a big part of making this car a success.

In the following pics it still needs paint, aero fitted and installed, and a crap ton of small details worked out, but I thought I'd post the most recent progress. Enjoy.

P.S. Thanks for the pics Bryan.

http://www.msprotege.com/members/[email protected]/WHite%20s13%20outside.JPG

http://www.msprotege.com/members/[email protected]/White%20s13%20rear.JPG

http://www.msprotege.com/members/[email protected]/White%20s13%20inside.JPG

http://www.msprotege.com/members/[email protected]/KA%20Front.JPG

First thing i did was test fit s14 dash and door panels. Kinda fit..lol
http://www.msprotege.com/members/[email protected]/Purple%20engine%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/Purple%20interior%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/Purple%20door%20panel%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/White%20Int.%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/White%20Int.%202%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/White%20Int.%203%20(Medium).JPG

Hard Race roll center adjusters:
http://www.msprotege.com/members/[email protected]/Rear%20Sus%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/Rear%20Sus2%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/S14%20subframe%20(Medium).JPG

Thanks to Logan @ ASPEC for the hook up on these!
http://www.aspecproducts.com/forums/zilvia/advan/advanRG2_02.jpg

http://www.aspecproducts.com/forums/zilvia/advan/advanRG2_00.jpg

Kazama Coilovers...
http://www.msprotege.com/members/[email protected]/240sx%20coilover1.JPG

http://www.msprotege.com/members/[email protected]/240sx%20coilover2.JPG

http://www.msprotege.com/members/[email protected]/240sx%20coilover3.JPG

http://www.msprotege.com/members/[email protected]/240sx%20New%20seats.JPG

http://www.msprotege.com/members/[email protected]/240sx%20New%20seats2.JPG

http://www.msprotege.com/members/[email protected]/240sx%20new%20seats3.JPG

http://www.msprotege.com/members/[email protected]/PICT0456%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0459%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0460%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0484%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0485%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0487%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0488%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0490%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0494%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0495%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0497%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0500%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0505%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0508%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0511%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0512%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0517%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0516%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0514%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/PICT0522%20(Medium).JPG

[ecuastyle84]

nicely done...i love how you put the s14 dash and panels...looks sick:bigok:

[arkive43]

wow very nice, awesome build.

[liv2drift045]

wow thats crazy i remember when you first started this... great to see it almost done.. nice build

[max2damax]

wow, I guess a striped car CAN look good!,
on the other hand, this might sound stupid, but I dont know this, is there any reason why this pipe is welded instead of just bent.
http://www.msprotege.com/members/[email protected]/PICT0487%20(Medium).JPG

[spools14]

wow, I guess a striped car CAN look good!,
on the other hand, this might sound stupid, but I dont know this, is there any reason why this pipe is welded instead of just bent.


cause it's sweet lol

nah, we didn't have any 3" mandrel bent pipe at the shop.

[max2damax]

best answer I could've got haha!!

[BrandonFD3S]

Very nice work! Just curious where did you pick up a set of Kazama Coilovers?

[spools14]

Very nice work! Just curious where did you pick up a set of Kazama Coilovers?

Ebay actually..haha

The guy was from FL, and had them imported.. they were only on his car for about 100 miles or so.. when I received them they looked brand new.

[status:one]

awesome build so far!! Looks incredible.

[swayray]

wow.... i'm very impressed w/ your build... it looks like you really took your time in planning and researching before putting it all together... well done...

one question though... what kind of gains are you expecting w/ that intake manifold setup?

[Lordrandall]

Nice, I like the dash too. Nice update on the build. :)

[spools14]

wow.... i'm very impressed w/ your build... it looks like you really took your time in planning and researching before putting it all together... well done...

one question though... what kind of gains are you expecting w/ that intake manifold setup?

hmm hopefully good gains.. lol The owner of OmegaMotive (Nick) is a very good friend of mine. Which is why I'm running his intake mani. I love it! it has velocity stacks in it, just an overall extremely well designed piece. here's a pic inside:

http://www.msprotege.com/members/[email protected]/Nick%20Mani3%20(Medium).JPG

[Ca_laurier]

holy shit. wasn't expecting that when i opened this thread

the s14 dash looks awsome to

[MELLO*SOS]

Cool build thanks for sharing pictures and some info.

- Why does the s14 dash only "kinda" fit, it actually looks pretty damn good from the pictures. Do you have any more details on this (too lazy to research on my own)

- I like the plug wire heat shield, but do you think that will heat soak from the manifold and melt your wires?

- I like how you rerouted the harness on the driver's side thru the heat shield. The MAF and CPS wires always look so stupid going across the front of the motor!

- What EMS and injectors are you using?

[spools14]

Cool build thanks for sharing pictures and some info.?

- Why does the s14 dash only "kinda" fit, it actually looks pretty damn good from the pictures. Do you have any more details on this (too lazy to research on my own)

It fits fine now.. it "kinda fit" when i first test fit it. It took some massaging to get it right but, i think it turned out pretty well.


- I like the plug wire heat shield, but do you think that will heat soak from the manifold and melt your wires?

Nah, it should be fine.


- I like how you rerouted the harness on the driver's side thru the heat shield. The MAF and CPS wires always look so stupid going across the front of the motor!

- What EMS and injectors are you using?

Greddy e-manage and 550's

[PoorMans180SX]

Nice build. Kinda similar to what I'm doing. Give us a whole car shot, sitting on the ground!

[spools14]

Nice build. Kinda similar to what I'm doing. Give us a whole car shot, sitting on the ground!

Should be driving it by the end of the week. Finishing the downpipe and exhaust tomorrow. Then I need to start fitting the kit. Afterwards i'll post some pics of it outside on the ground.

[MELLO*SOS]

Thanks for the answers. +1 for you, GL with the project.

[s13gold]

nice build...especially the craftsmanship.

[DJ_Sunrise]

very nice.. wish i had the balls to undertake a project like this..

-Bart

[BrandonFD3S]

Ebay actually..haha

The guy was from FL, and had them imported.. they were only on his car for about 100 miles or so.. when I received them they looked brand new.

Wow.. man great project can't wait to see it done. You are giving me Ideas for my upcoming project.

[spools14]

nice build...especially the craftsmanship.

Thank you, it means a lot but Nick and Marshall did most of the custom fab stuff, they are awesome.

[MELLO*SOS]

Some more pictures of the s14 dash or info on what changes you made would be cool :). I'm sure it's been done a million times before but this is the first time I've seen it posted recently, I like it I think it looks pretty damn good.

[spools14]

Some more pictures of the s14 dash or info on what changes you made would be cool :). I'm sure it's been done a million times before but this is the first time I've seen it posted recently, I like it I think it looks pretty damn good.

I honestly didn't take any other pics of it.

I wouldn't reccomend it for a daily driver simply because I removed all of the dash venting, I also had the trim a decent amount of junk underneath the dash. This car WILL be street legal, however, it won't see much street use, it'll mainly be used at VIR.

I'm sure with some more time and effort the dash vent could be retained, maybe by using a flexable hose, but i wasn't really interested in the vents working sicne it doesn't have a/c. Also, the door panels had to be modified aswell... just trial an error really.

[bardabe]

dude your welds are so bad ass. I wish I could make my welds look like that. maby in a few years. ha ha but never the less insane. absolutely gorgeous.

[fromxtor]

those have got to be the best pie cut welds I have ever seen. Looks frikken awesome.

[atutt]

nicely done...i love how you put the s14 dash and panels...looks sick:bigok:

Do the S14 dash and door panels just drop right in?

[the terrible one]

please more info on how you did the s14 dash and panels!!

[swayray]

that intake manifold is re-gad-damn-diculous!

are there plans on mass producing those? itbs?

[spools14]

Do the S14 dash and door panels just drop right in?

ummm no.

please more info on how you did the s14 dash and panels!!

Please read the rest of the thread.

[spools14]

that intake manifold is re-gad-damn-diculous!

are there plans on mass producing those? itbs?

Umm yea, they are currently available through his website www.omegamotive.com

[swayray]

thanks for the info..

[DisEpyon]

wow, i have lots and lots of respect into that project car!!!

keep up the good work and dont start lazy'ing out on stuff, like most people do.

[J-Style]

This thread is awesome! You definately win for the "best thread I read in the morning"! The S14 dash and door-panels and intake-manifold are super hot! Great job!

[upSLIDEdown]

those have got to be the best pie cut welds I have ever seen. Looks frikken awesome.

Hence the reason I took a pic of just that. LOL JDM Bends FTW!! Congrats on the progress Chris. As soon as it hits the ground we'll get some shots of the whole car.

[the terrible one]

oohh now i see it..my bad.haha
+1 for an awesome build!

[Cloud9]

That is the best thing ive seen in awhile, and i want the dash badly.
Great thread!!!

[mr_240sx]

wow thats a crazy build..... make sure to keep us updated until its finished!

[spools14]

Thanks guys I'm hoping to get the exhaust finished up tomorrow, The downpipe was finished today and the rear bumper got installed... hopefully i'll take it for a spin tomorrow. If so I'll snap a few pics.

:drool:

[spools14]

It's been awhile since I updated this thread... so I finally drove it..

I'm currently waiting on my injectors so I can tune it, I still need to do some final adjustments to the aero, and I will be redoing the hood, however, I'll be keeping the same idea, just done so it actually looks decent.......and then it's off to paint. :)

Enjoy:

http://www.msprotege.com/members/[email protected]/3%20(Medium).JPG

BTW:The exhaust will be comming off lol... its just some junky ebay stuff right now.
http://www.msprotege.com/members/[email protected]/New%204.JPG

http://www.msprotege.com/members/[email protected]/1%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/6%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/8%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/Finished%203%20(Medium).jpg

http://www.msprotege.com/members/[email protected]/Finished%204%20(Medium).JPG

[azndoc]

Your headlights are freaking me out man...

Nice build.

[420sx]

dude the front looks sick.... they might not be best driving lights but it looks fucking awsome

[s14gj]

what head lights are u runing? car looks hot!

[spools14]

dude the front looks sick.... they might not be best driving lights but it looks fucking awsome

Thank you, It took sooo long to get that POS hood to look 1/2 decent, like i said i'm going to build another one (ver. 2) and it'll look better i learned a lot from the first one.

And the lights aren't great for night driving but you can see good enough to drive, also, I'll be adding a set of HID projector fogs for low beams sometime in the future.

[DRFT180]

What sizes are the wheels?

[slothonaleash]

every single attempt at changing up the popup headlight front end's headlights that i've seen has failed miserably...except this one... looks really angry lol

great work

[spools14]

What sizes are the wheels?

17x9 +22 Front is running a 7mm spacer. So +15 effective up front.

[mr_240sx]

omfg!!! that hood/headlight setup looks absolutely out of this world!!! i love it! looks really mean!

[trybal]

damn that looks hawt!!

[reefer23]

wow very nice!

[240sx_sr20det]

holy shit.. the front end is bad ass! What kit is that?

oh and how much you pick up those rims for?

[delphis]

The guy at omegamotive should consider building an sr20de/t setup like that. :)

[GTChampion]

That is amazing.! your bumper look so good ...do you know what the bumper is on the green car is ? anyone!?

[dirtdiggler666]

i love the hood / light combo, i would work on making the hood fit better but the overall idea and shape of the headlight buckets looks killer:bowdown:

[S13-Silvia]

Dude, I really like you car, the stance, the wheels, everything except the headlights. It's your car though, do what you want to it.

Also what are your tire sizes?

[fliprayzin240sx]

Like the headlight setup, anyways, info on whats done to the engine and spec on that turbo? How much power do you think you'll get with the 550s and what are you doing for tuning again?

[ms!3]

haha, that looks fucking dope. props on your build.

[blu808]

http://www.msprotege.com/members/[email protected]/Finished%203%20(Medium).jpg

That looks fucking rad. Good inovation.

pos rep to you.

[spools14]

holy shit.. the front end is bad ass! What kit is that?

oh and how much you pick up those rims for?


The kit is a cheap Vertex Copy, Logan @ A-Spec hooked me up with a hell of a deal on the wheels.

That is amazing.! your bumper look so good ...do you know what the bumper is on the green car is ? anyone!?

Orgin Stylish.

i love the hood / light combo, i would work on making the hood fit better but the overall idea and shape of the headlight buckets looks killer:bowdown:

Yea, this was kind of a trial run hood, I will be redoing it so it fits better.

Dude, I really like you car, the stance, the wheels, everything except the headlights. It's your car though, do what you want to it.

Also what are your tire sizes?

Tire sizes are 235/40 and 245/40 It's going to be used mainly at HPDE's for now, and hopefully next year I'll be running time trials.




That looks fucking rad. Good inovation.

pos rep to you.


Thanks man... I'm happy with the outcome just needs a little finishing. :wiggle:

[irritatedmax]

sweet car/build. in your original post, it says you were building a drag car but now it looks like you are building it to be a road course/time attack style car. i approve of the switch. it is an absolutely beautiful engine bay. i love rgII's as well. please post specs on the motor/turbo setup.

[Not_Nissan]

WOW! Love it man...it looks good with the front end on, and off...haha

[UfoZ8myCow]

Man that thing looks pissed off just sitting still. Mad props man, its come along great!

[sijia10358]

WAH!! nice build!!! are you gonna leave the front end like that?! awesome!!!

[CSil80]

Great build!
Can't wait to see pics of the Version 2 of your front end :)

[Slammed Assassin]

deng nice build dude..

[spools14]

sweet car/build. in your original post, it says you were building a drag car but now it looks like you are building it to be a road course/time attack style car. i approve of the switch. it is an absolutely beautiful engine bay. i love rgII's as well. please post specs on the motor/turbo setup.

Nooo... The original owner intended it to be a drag car when i bought it. I had every intention of it being used for HPDE's and TT events from the begining. :-)

[exitspeed]

http://www.msprotege.com/members/[email protected]/Finished%204%20(Medium).JPG

I've seen that somewhere before...

http://img78.imageshack.us/img78/683/megatronmovie2pc7.jpg

Oh yea...it's mean looking.

[swayray]

i've been tossing that idea for a while now... its nice to see it happen... very slick...

although my idea involves a Plexiglases cover...

[steve shadows]

sweet car/build. in your original post, it says you were building a drag car but now it looks like you are building it to be a road course/time attack style car. i approve of the switch. it is an absolutely beautiful engine bay. i love rgII's as well. please post specs on the motor/turbo setup.

I invented the switch.

haha

nice plans, time attack is still less fun than drag though :)

[TokyoNights]

wow cant believe you guys like the headlight
im sorry but those look haggard

[A Spec Products]

Nice build

Nice wheels :)

[powersteeringless180sx]

sweet build. i'm kinda iffy on the headlights. but +1 for originality.

[irritatedmax]

Nooo... The original owner intended it to be a drag car when i bought it. I had every intention of it being used for HPDE's and TT events from the begining. :-)

oh okay. thats good to hear. everyone with a ka-t setup uses it for drag racing. its nice to see people branching out. now post a spec list of the motor setup....please.

[spools14]

wow cant believe you guys like the headlight
im sorry but those look haggard

haha, which is why I am redoing it. Keeping the same concept though.

[fromxtor]

the second run on that hood should look evil, I'm glad to see another KA-ter going for time attack and road racing.

[1Via!]

What a horrible build; crappy parts, shoddy craftsmanship, and complete lack of vision.

I hate you.

Good thing its not a coupe, I'd hate you even more.

I like the wheels, first time ive seen RGIIs on a street car.

[onehalfasia]

http://www.msprotege.com/members/[email protected]/Finished%203%20(Medium).jpg



http://images.buycostumes.com/mgen/merchandiser/11373.jpg

:coold:

[s13pignose]

Looks real good chris, how long will it be before I see this cruising around the burg lol. Front end is probably gonna scare somepeople. That was a good idea. Ed showed me pics of the wheels and stuff, but I think this is first time I've seen front end.

-Chris

[McRussellPants]

What a horrible build; crappy parts, shoddy craftsmanship, and complete lack of vision.

I hate you.

Good thing its not a coupe, I'd hate you even more.

I like the wheels, first time ive seen RGIIs on a street car.


This about hits the nail on the head.

super gross. dzus fastener sideskirts is king of formula D crap tune.

RGs would look good with a spacer... and without vertex... and without crap hood.

kouki 180sx aero and the car looking clean would make the RGs look right.

[Sideways_In_SD]

Looks more like Vortex to me...

Or maybe Body-Magic, or Another Import Tuner, or Version 615170918274923...

:fruit:

At least the hoods original :goyou:

[spools14]

What a horrible build; crappy parts, shoddy craftsmanship, and complete lack of vision.

I hate you.

Good thing its not a coupe, I'd hate you even more.

I like the wheels, first time ive seen RGIIs on a street car.

lol this is funny.

[UfoZ8myCow]

Looks more like Vortex to me...

Or maybe Body-Magic, or Another Import Tuner, or Version 615170918274923...

Meh, who the fuck cares if it's real Vertex or not? Chances are its just going to get all fucked up anyways. Id rather replace an $80 wannabe Vertex bumper than an expensive ass real one. Something tells me he isnt building a show queen...

[spools14]

This about hits the nail on the head.

super gross. dzus fastener sideskirts is king of formula D crap tune.

RGs would look good with a spacer... and without vertex... and without crap hood.

kouki 180sx aero and the car looking clean would make the RGs look right.

dzus fasters are there for a purpose, not to copy some trend in formula d i was unaware of. I want the ability to be able to remove the side skirts quickly for track days, so I can jack the car up quickly and easily.

I'm not some bandwagon fanboi, if i was I'd do what you suggested, you know they same thing everyone else and there mom has done and run stock aero, cause thats so awesome. :ugh:

Fuck that, I built the car the way I wanted to build it, purposeful. It'll be used as a track car, not a show car, not a drift car, not a drag car.

I'm not going to run spacers, because I'm not going to run a smaller tire than whats on there. If anything I'd run a bigger tire, esp. in the rear. I'm all about wheel fitment, if you've seen any of my pervious cars you'd realize this.. But, this car is serving a purpose, one where smaller tires are a limiting factor on performance.

Anyway, thanks for the input :-)

[opponheimer]

This about hits the nail on the head.

super gross. dzus fastener sideskirts is king of formula D crap tune.

RGs would look good with a spacer... and without vertex... and without crap hood.

kouki 180sx aero and the car looking clean would make the RGs look right.

No offense but dont let chris' low posts fool you, hes the godfather of nissans around the Mid Atlantic area and def. not a bandwagon hopper or import tuner kid. Everyone who knows anything about nissans knows chris or of his work around here. And knowing chris this car is going to be everything he says it is.

You are welcome to your opinion of his car though.

[chmercer]

bail out on that electrical tape and pinstripe shit

headlights look dumb

dzus body kit looks dumb

nice manifold and coilovers

you prob want to brace those shock towers since you cut out the tub

[McRussellPants]

dzus fasters are there for a purpose, not to copy some trend in formula d i was unaware of. I want the ability to be able to remove the side skirts quickly for track days, so I can jack the car up quickly and easily.

Dzus fasteners suck, and look like 1in holes in the body kit, which is why it looks like dick.

use zipties or screws like the rest of the planet, if you're taking your sideskirts off and on to work on your car you need to get rid of that truck jack your using.

I'm not some bandwagon fanboi, if i was I'd do what you suggested, you know they same thing everyone else and there mom has done and run stock aero, cause thats so awesome. :ugh:

Am I not looking at a picture of a white car with ebay Vertex? because I am looking at a paragraph about being original.

Fuck that, I built the car the way I wanted to build it, purposeful

again, I'm seeing a car with a body kit and super ghetto Bomex wanna be angry eye thing on it... and then seeing a speil about purpose.

put the popups back in and the stock hood. if you cleaned up your car so everything didn't look so trashy it would probably look like a white yashio car and subsequently not like total ass.

[driftstyre]

damn, that front end is insane. The fab work is awesome too. You better bring that thing to GTLive/VIR this year.

[Ca_laurier]

its a cool idea, but if your going for that look i would just slap a s13 silvia hood on with the 180sx/240sx bumpers and the lights that your using

sick ride non the less, keep er up dude

[spools14]

damn, that front end is insane. The fab work is awesome too. You better bring that thing to GTLive/VIR this year.

Thank you very much, I definatly will.

[spools14]

Dzus fasteners suck, and look like 1in holes in the body kit, which is why it looks like dick.

use zipties or screws like the rest of the planet, if you're taking your sideskirts off and on to work on your car you need to get rid of that truck jack your using.

Thanks for the suggestion, but I think i'll stick with what i got. It's easier.



Am I not looking at a picture of a white car with ebay Vertex? because I am looking at a paragraph about being original.

No, I don't know why your so concerned, but i personally don't like stock aero, and the reason i chose vertex, is because it's more agressive than stock aero but not as agressive as works 9 or Uras or whatever.



again, I'm seeing a car with a body kit and super ghetto Bomex wanna be angry eye thing on it... and then seeing a speil about purpose.

And how is it not purposeful? I'm not sure if you noticed, but the pop up headlights don't "bolt on" to the car anymore.. lol so yes, I worked with what i had, the headlights on the car serve a purpose, the light up shit. ;-)




if you cleaned up your car so everything didn't look so trashy it would probably look like a white yashio car and subsequently not like total ass.

I think you should read the title of this thread. ALOMOST COMPLETED. as in it's not finished yet. Clam down and let me finish the car before you get your mcrussellpants in a jam.

chmercer: The car is in the process of getting caged, it will have a fstb before it's tracked. But just to clarify, the current front is stronger than stock.

[SimpleS14]

Dang...nice build so far. Aren't you the same guy with the really nice S14 with chrome rims? (I forgot the model and color)...did you sell that car?

If I remember correctly, your in Lynchburg, VA....quite a drive from me, but maybe one day I will see your car at VIR.

[spools14]

Dang...nice build so far. Aren't you the same guy with the really nice S14 with chrome rims? (I forgot the model and color)...did you sell that car?

If I remember correctly, your in Lynchburg, VA....quite a drive from me, but maybe one day I will see your car at VIR.

yes, i had the s14 with vskf's on it. I sold it a long time ago. I go back and forth between lynchburg and richmond.

[upSLIDEdown]

Orgin Stream


Fixed

hvckhgcvjgvkhgvj,hb

[silviaz]

I don't really feel the front but anyway it's your car. The rest is mean. ;)

At least, it's better than the junk shit on ebay like the impreza lol

[Gjohnson7]

Hott! Keep the pics coming!

[undergroundman]

http://img.photobucket.com/albums/v133/black240sx/Turbokit032.jpg

[240sx_sr20det]

undergroundman- what paint did you use on the stock-bodied S13?

[silvia_monkey]

man you put alot of work into it...... but its comeing out so nice!!! props to you man

[420sx]

oh fuck.... dont tell me you going to leave it primered black now. if you do, that is fucking super homo

[chmercer]

dont think thats the same car

[SimpleSexy180]

haha its not. just somebody else with those headlights.

[spools14]

oh fuck.... dont tell me you going to leave it primered black now. if you do, that is fucking super homo

uhhh that's not my car, not even close.

I'll it'll be painted GP white after the cage is finished.

[opponheimer]

updates??

msglngth

[spools14]

Well, I had to put the car on the back burner for awhile but, started working on it again, planning on being at VIR HPDE on Feb. 22 n 23.

New seat and Roll Bar (will be painted asap):

http://www.msprotege.com/members/[email protected]/cage%201%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/cage%202%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/cage%203%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/cage%204%20(Medium).JPG

http://www.msprotege.com/members/[email protected]/cage%205%20(Medium).JPG

[scottie]

DAMN! Nice welds!! Almost ashame you have to paint it.

[dsc4130]

DAMN! Nice welds!! Almost ashame you have to paint it.+1
spools14 i like your car. it doesnt look like everyone elses and its built for the track. keep it up i wanna see were this goes

[sillydrift]

that is a nice build! keep up the good work

[louisdaboois]

hey chris, awesome build! Adrian keeps telling me about this car, excited to see it february man!

PS. you need to help adrian get that miada running =P.

[Bobafreak]

That shit is fresh. Keep up the work.

[spools14]

+1
spools14 i like your car. it doesnt look like everyone elses and its built for the track. keep it up i wanna see were this goes

Thanks! I'm pretty excited to start driving it on track.

hey chris, awesome build! Adrian keeps telling me about this car, excited to see it february man!

PS. you need to help adrian get that miada running =P.

dude seriously you need to pm me you number... we need to catch up now that i'm in richmond too.

[hunter8411]

Keep up the good work, looks sick.

[sijia10358]

awesome welding on the cage!! cant wait to see the complete whole thing!!!

[k0uki]

awesome build, and great welds man

[CrimsonRockett]

It's different.

I love it.

Nice build!

[spools14]

Thanks guys!

I just got this in the other day. Need to change out the fittings to -10an and she'll be ready to cool some oil:

http://www.msprotege.com/members/[email protected]/Setrab%201%20(Medium).JPG

[eds13]

Psshhh, shiz is weak.

heheh jp man, i thought you were getting a whole cage tho. lol

[spools14]

Psshhh, shiz is weak.

heheh jp man, i thought you were getting a whole cage tho. lol

nah, just 4 points... all I really wanted it for is so I can use harnesses safely... well that and chassis stiffness.

[Antihero983]

dude when i first saw the pic of the engine setup fully assembled....part of me wanted to cream, and the other part wanted to run in fear and pray i never line up next to you at a drag event.

but then again i dont drag race...so im all set ;)

[corriganjoshua]

just love it...good work

[spools14]

but then again i dont drag race...so im all set ;)

that makes 2 of us ;o)

[Antihero983]

oh. lol damn. ^_^

[dynamicck]

damn welds on the cage and IC. very consistent

[idriveattz32]

glad to see this thing revived, keep it up!

[Bubba]

Very nice build. Looking forward to seeing it finished. My project is driving me nutz, hahaha.

[Bushido]

lets see the ver. 2 hood.

[spools14]

lets see the ver. 2 hood.

Still working on it, i had one, but didn't like that one either, so i'm starting over again, but i think this is going to be the one i'll go with I'll post pics when finished.

[ByeByeSti]

car looks nasty man, that hood and front end is amazing. its not like s14's where everyone has origin aggressive or stylish haah keep up the good work!!

[s13pignose]

Nice chris...hey do you still have that othe recaro with the white mesh head rest or did you sell it

[spools14]

Nice chris...hey do you still have that othe recaro with the white mesh head rest or did you sell it

thanks man... I sold the seat awhile back tho...

[s13pignose]

Ah okay lol. Good to see you can start back with your car. A lil off topic, but I guess you heard the good news on new london situation...they had marshall on the news. Track is staying open.

[smokins14]

looks great man. can't wait to see it finished

[spools14]

Ah okay lol. Good to see you can start back with your car. A lil off topic, but I guess you heard the good news on new london situation...they had marshall on the news. Track is staying open.

yea I herd marsall called me yesterday... good stuff

how's your car coming along? ill hopefylly have somebetter pics ooof the cage n seat postedtoday.

[kuruptR]

Awesome welds on the cage! The door panels look like they came together well too..

Good work, cant wait till you start on the out side!

[s13pignose]

yea I herd marsall called me yesterday... good stuff

how's your car coming along? ill hopefylly have somebetter pics ooof the cage n seat postedtoday.

Ehh its out the game for a min lol. Probably gonna rebuild the transmission...it's dead. Yeah I know....5spd conversion lol...but I'd rather keep it auto. Wouldn't mine maybe getting another 240 down the road as a 2nd car, and use this as a daily. Other then that, how it looks in my sig is how it still looks now. Oh check this out...you remember the led koukis? Well the 1st set I got from Aspec logan, I accidently cracked the center garnish...but sold the tails. Then I bought another set on ebay, only to get rear ended last month. Basically the impact broke the sealant loose, and left a gap in the housing of the garnish and tails, and water would get in and stay for a long time. So now I don't know if I want another set or what, but focused on just getting back on the road for now.

[RedStage]

looks good, can't wait to see the finished product. GL with it.

[blueshark123]

just read threw the whole thread nice build cant wait to see it painted with a new hood

[DunG HAB SP]

nice ...reall nice...

[wannabe_drifter]

Nice car, engine setup looks really good !!

I really like that idea for those headlights !!! It looks really mean. It needs to be done better though, can't wait to see ver. 2 of the hood !