PDA

View Full Version : need some quick answers


s13silvia123
05-29-2007, 10:46 AM
i have put two new wheel spacers on why does it make my steering wheel shake when i drive only at 40 miles an hour.

why does my RPM drop and my car dies on me when i'm driving.
i just put on a z32 Maf. caliberated with POWER FC to work already.

adrians_s13
05-29-2007, 10:51 AM
i have put two new wheel spacers on why does it make my steering wheel shake when i drive only at 40 miles an hour.


theres an imbalance somewhere, its either your tires or its your spacers. If it didn't do it before the spacer install, my money's on the spacers. What kind of spacers do you have?

s13gold
05-29-2007, 10:52 AM
did you get wheel alignment?

s13silvia123
05-29-2007, 10:59 AM
theres an imbalance somewhere, its either your tires or its your spacers. If it didn't do it before the spacer install, my money's on the spacers. What kind of spacers do you have?

did you get wheel alignment?


its H&R wheel spacers its hubcentric too. wheel alignment is ok and the tires are new driven on a few miles. it didnt do that when i didnt put wheel spacers on.

Sileighty_85
05-29-2007, 12:14 PM
its H&R wheel spacers its hubcentric too. wheel alignment is ok and the tires are new driven on a few miles. it didnt do that when i didnt put wheel spacers on.

Well I gotta ask but did you tighten the lugs good on the Spacer?

s13silvia123
05-29-2007, 01:24 PM
Well I gotta ask but did you tighten the lugs good on the Spacer?



its been done torque to 85-90 lbs

S13NismoStyle
05-29-2007, 01:55 PM
Have you re-torque the spacer lugs after the first couple of miles or so? Also i would check to make sure there is no debris between the spacer and the hub. This has happened to me in the past with a burr from when i drilled my
q45 rotors. A small burr caused the rotor to not seat properly and caused my wheel to shake at certain speeds.

s13silvia123
05-29-2007, 02:13 PM
Have you re-torque the spacer lugs after the first couple of miles or so? Also i would check to make sure there is no debris between the spacer and the hub. This has happened to me in the past with a burr from when i drilled my
q45 rotors. A small burr caused the rotor to not seat properly and caused my wheel to shake at certain speeds.


thanks man you have the most adequate answer for me thanks man