PDA

View Full Version : a couple s14 sr20det swap questions


bwake 5
05-26-2007, 01:23 AM
1) are there any american radiator hoses that are compatible to the s14 radiator hoses or can you only use s14 radiator hoses

2) i am swapping an s14 kouki sr into my s13 chasis and the heater hoses from the motor to the firewall wont fit. the outlet from the motor is way bigger than the outlet for the firewall side.....anyone who has done the s14 to s13 chasis should know what im talking about, what did you do about the heater hoses?

3) the vacuum line that goes from the intake manifold area to the intercooler piping on the intake manifold side, what would happen if you didnt hook that up? my outlet on my intercooler piping is routed the opposite way and is way bigger outlet than the hose itself. what have you done about that?

if you have any ideas or suggestions about any of the things above your help would be greatly appreciated..... thanks again

bwake 5
05-26-2007, 07:10 AM
morning bump due to the fact that im still clueless lol

cgtdream
05-26-2007, 08:04 AM
this is for the first one and second one, and i dont know if it'll help you out much.....here ya go .......


Radiator hoses
http://http://www.srownersclub.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=HT&Product_Code=HTC-INST-RAD&Category_Code=HOSE

Heater Hoses
http://www.srownersclub.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=HT&Product_Code=HTC-INST-HTR-S13&Category_Code=HOSE

all of this was found on srswap.com ^_^

bwake 5
05-26-2007, 05:12 PM
haha theres got to be someone out there that knows....... or not lol