IWantRWD
05-25-2007, 10:26 AM
OK, all these parts are OBO. do not include shipping and need serious inquirys only
The Car this is being pulled from is a 92
KADE engine - 350 (400 with starter, starter is 1 day old, used for 10 cranks)
-complete, just need exhaust manifold and starter.
-did compression test while cold and throttle closed, 85,110,110,110.
-right now its a crank no start.
KADE engine wiring harness with ECU - 75
-uncut complete
Fidanza Aluminum flywheel - 200-275 depending on condition
-used since october, so about 8 months, 6k miles
-11lbs model with replacible friction surface
KADE header - 80
-plugged EGR hole
-modded the mounting bolts for use with 3" exhaust
-fits perfect
S14 cams. - 25
Z32 MAF - 50
-tabs broken off but shaved so you can just slip the filter over the MAF, no need for a adaptor plate
Spare upper intake manifold - 15
-good condition, bought it for my ITB project, now im going CA18
OEM front markers - 10
-took off when i put the 180sx markers on
Now- NON-KA stuff.
Neverwinter Nights 2 - 35
-bought it, just never played, comes with everything
Everquest 2 - 35
-same as above
ATD Paint spray guns - 100
-comes with 3 guns, stand, and cleaning stuff, also, one regulator, used the basecoat gun like, twice, both times thuroughly cleaned.
-Base/clear gun, Primer gun, and jamb gun. all with cups
Im really not looking to part out the motor, but give me a good offer and i wont refuse it.
Location will be in Indianapolis, IN zip is 46221. Like i said, shipping is not included.
The Car this is being pulled from is a 92
KADE engine - 350 (400 with starter, starter is 1 day old, used for 10 cranks)
-complete, just need exhaust manifold and starter.
-did compression test while cold and throttle closed, 85,110,110,110.
-right now its a crank no start.
KADE engine wiring harness with ECU - 75
-uncut complete
Fidanza Aluminum flywheel - 200-275 depending on condition
-used since october, so about 8 months, 6k miles
-11lbs model with replacible friction surface
KADE header - 80
-plugged EGR hole
-modded the mounting bolts for use with 3" exhaust
-fits perfect
S14 cams. - 25
Z32 MAF - 50
-tabs broken off but shaved so you can just slip the filter over the MAF, no need for a adaptor plate
Spare upper intake manifold - 15
-good condition, bought it for my ITB project, now im going CA18
OEM front markers - 10
-took off when i put the 180sx markers on
Now- NON-KA stuff.
Neverwinter Nights 2 - 35
-bought it, just never played, comes with everything
Everquest 2 - 35
-same as above
ATD Paint spray guns - 100
-comes with 3 guns, stand, and cleaning stuff, also, one regulator, used the basecoat gun like, twice, both times thuroughly cleaned.
-Base/clear gun, Primer gun, and jamb gun. all with cups
Im really not looking to part out the motor, but give me a good offer and i wont refuse it.
Location will be in Indianapolis, IN zip is 46221. Like i said, shipping is not included.